Johannes Konnerth
Univ.Prof. Dipl.-Ing. Dr. Johannes Konnerth
Institut Institute of Wood Technology and Renewable Materials
Location Konrad Lorenz-Straße 24, 3430 Tulln an der Donau
Email johannes.konnerth@boku.ac.at
Tel: +43 1 47654-89159
Projects
0 Projects found.
Publications
Knowledge Transfer to Society
Media
Lectures
(2023) Farbe und Farbmessung
Autoren: Stingl, R; Konnerth, J;
MK PÖCHLARN - Meisterschule für Tischler
(2023) Innovationskurve Holzbauwerkstoffe - Rettet Laubholz den Holzbau?
Autoren: Konnerth, J; Pramreiter, M;
Bauen mit dem Wald, Koalition für Holzbau
(2023) Unidirektional ausgerichtete Strand-Platten für Kreuzlagenholz
Autoren: Malzl Lukas, Pramreiter Maximilian, Konnerth Johannes
15. Holzwerkstoffkolloquium
(2022) Scale-Up of 5-hydroxymethylfurfural-rich adhesive precursor production and structural features of humin side products
Autoren: Sailer-Kronlachner, W.; Rosenfeld, C.; Konnerth, J.; Böhmdorfer, S.; Bacher, M.; Rosenau, T.; Potthast, A.; Geyer, A.; van Herwijnen, H.W.G.;
19. Österreichische Chemietage - Joint Meeting of German & Austrian Chemical Societies
(2022) Effect of Hydroxymethylfurfural on the cure speed in fructose-based adhesives for interior particleboards
Autoren: Rosenfeld, C.; Sailer-Kronlachner, W.; Konnerth, J.; Geyer, A.; van Herwijnen, H.W.G.;
19. Österreichische Chemietage - Joint Meeting of German & Austrian Chemical Societies
(2022) Biobasierte Klebstoffe für die Holzindustrie
Autoren: Konnerth, J; van Herwijnen, H;
Innovationsplattform Bioökonomie und Kreislaufwirtschaft: Biobasierte Klebstoffe und Beschichtungen für technische Anwendungen
(2022) Holz und Hygiene
Autoren: Stingl, R; Konnerth, J; Domig, K;
MK PÖCHLARN - Meisterschule für Tischler in Pöchlarn
(2022) Mechanical Mapping of Lignocellulosic Surfaces
Autoren: Gusenbauer, C; Konnerth, J
Bruker EU Material AFM User Meeting 2022?
(2022) The predictive quality of radial compression strength for vulnerability to cavitation
Autoren: Rosner, S.; Luss, S.; Konnerth, J.; Kunert, N.
5. Xylem International Meeting 2022
(2022) Temperature and moisture dependent rheological cure characterization of wood adhesive
Autoren: Tran, A; Konnerth, J; Gindl-Altmutter W
International Conference on Wood Adhesives 2022
(2022) Development of an in-situ approach towards sustainable, carbohydrate-based adhesives
Autoren: Sailer-Kronlachner, W; Rosenfeld, C; Bacher, M; Böhmdorfer, S; Konnerth, J; Geyer, A; van Herwijnen, H.W.G,
International Conference on Wood Adhesives ICWA 2022
(2022) Effect of Hydroxymethylfurfural on the Cure Speed in Fructose-based Adhesives for Interior Particleboards
Autoren: Rosenfeld, C; Sailer-Kronlachner, W; Konnerth, J; Geyer, A; van Herwijnen, H.W.G.
International Conference on Wood Adhesives ICWA 2022
(2022) Characterization of flexible melamine-urea-formaldehyde adhesives for CLT applications
Autoren: Ramachandrareddy, B; van Herwijnen, HWG; Beck, G; Bredesen, R; Konnerth J
International Conference on Wood Adhesives ICWA 2022
(2021) Ressourceneffiziente Holzwerkstoffe - Stand Der Technik Und Wege in Die Zukunft
Autoren: Pramreiter, M; Höchtl, S; Mayencourt, P; Müller, U; Gindl-Altmutter, W; Konnerth, J
14. Holzwerkstoffkolloquium
(2021) Adhesive strength for structural wood applications bonded at low temperature
Autoren: Tran, A; Mayr M.; Konnerth, J; Gindl-Altmutter W
6th International Conference on Structural Adhesive Bonding AB 2021
(2021) Additives as a modification tool for water-based polyvinyl acetate (PVAc) adhesives
Autoren: Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J
6th International conference on structural adhesive bonding 2021
(2021) Opportunities and challenges coming with hardwood use for structural applications
Autoren: Konnerth, J; Huber, C; Bliem, P; Obernosterer, D; Solt-Rindler, P; Jeitler, G; Grabner, M; Müller, U; van Herwijnen, H; Pramreiter, M;
9th Hardwood Conference 2021
(2021) Improving polymerized lignin properties using green plasticizers.
Autoren: Jimenez Bartolome, M; Bischof, S; Pellis, A; Konnerth, J; Wimmer, R; Weber, H; Schwaiger, N; Guebitz, G.M.; Nyanhongo, G. S.
International Conference on Renewable Resources and Biorefineries.
(2021) Advanced Atomic Force Microscopy for Analyzing Wood Surfaces
Autoren: Gusenbauer, C; Cabane , E; Xu, X G; Konnerth, J
Salzburg Conference for Smart Materials 2021
(2021) Chemorheological analysis and rheokinetic study of carbohydrate-hydroxymethylfurfural-amine adhesive
Autoren: Thoma, Catherine; Solt-Rindler, Pia; Sailer-Kronlachner, Wilfried; Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Pellis, Alessandro; van Herwijnen, Hendrikus W. G.
EURADH 2021
(2021) Factors influencing open-assembly time of polyvinyl acetate (PVAc) adhesives
Autoren: Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J
6th International Conference on Structural Adhesive Bonding AB 2021
(2021) Transdermal NSAID release patches made from anisotropic 2,3-dicarboxycellulose hydrogel membranes
Autoren: Liebner, F; Plappert, S; Konnerth, J; Nedelec, JM
National Spring Meeting of the American Chemical Society ACS 2021 - Macromolecular Chemistry: The Second Century
(2021) I-beams based on wood particles using a novel non cutting disintegration technology
Autoren: Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Mauritz, R; Konnerth, J
SCSM21-Salzburg Conference for Smart Materials 2021
(2021) Lab-scale testing of carbohydrate-based adhesives for wood-based products
Autoren: Thoma, Catherine; Sailer-Kronlachner, Wilfried; Solt-Rindler, Pia, Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, H.W.G.
EFIB 2021
(2021) Functionalized wood & the role of advanced analytics.
Autoren: Konnerth, J; Gusenbauer, C;
Salzburg Conference for Smart Materials 2021
(2021) Reduction of formaldehyde-based adhesives in plywood production by adding renewable additives
Autoren: Hogger, E M; Konnerth, J; Moser, J; Kantner, W; van Herwijnen, H W G;
1st International Salzburg Conference for Smart Materials 2021
(2020) Simultaneous Chemical and Topographical Mapping of Wood Ultrastructures by Chemical Force Microscopy
Autoren: Gusenbauer, C; Cabane, E; Nypelö, T; Konnerth, J
SWST International Convention 2020
(2020) The importance of cold tack of urea formaldehyde in plywood production
Autoren: Elfriede Hogger, Hendrikus W. G. van Herwijnen, Johann Moser, Wolfgang Kantner, Johannes Konnerth
SWST 2020 Convention
(2020) Systematic evaluation of wheat flour, wheat starch and wheat protein in urea and phenol formaldehyde resins
Autoren: Elfriede Hogger, Hendrikus W. G. van Herwijnen, Wolfgang Kantner, Johann Moser, Johannes Konnerth
SWST 2020 Convention
(2020) Anisotropic nanocellulose gel membranes for drug delivery: tailoring structure and interface by sequential periodate - chlorite oxidation
Autoren: Plappert, S; Konnerth, J; Nedelec, JM; Liebner, F
International Conference on Aerogels for Biomedical and Environmental Applications
(2020) Manufacturing and Optimization of a Cellulose-Based “Green” High-Performance Material
Autoren: Matthias Jakob, Ivana Czabany, Johannes Konnerth, Wolfgang Gindl-Altmutter
SWST International Convention 2020
(2020) Low Temperature Adhesive Bonding for Structural Wood Materials
Autoren: Tran, A; Mayr, M; Konnerth, J; Gindl-Altmutter, W
SWST International Convention 2020
(2020) Chemical mapping of lignocellulosic substrates via chemical force microscopy
Autoren: Claudia Gusenbauer, Etienne Cabane, Johannes Konnerth
XXII. Annual Linz Winter Workshop
(2019) Wood adhesives based on domestic plant proteins
Autoren: Averina, E; van Herwijnen, HWG; Konnerth, J;
18. Österreichische Chemietage 2019
(2019) Einfluss der Kaltklebrigkeit auf die Vernetzung von Harnstoff-Formaldehyd-Harzen bei der Herstellung von Sperrholz
Autoren: Hogger, E; van Herwijnen, HWG; Kantner, W; Moser, J; Konnerth, J;
13. Holzwerkstoffkolloquium 2019
(2019) Optimisation of drying and curing parameters of PF impregnated wood
Autoren: Bliem, P; Frömel-Frybort, S; Gartner, C; Konnerth, J; Mauritz, R; van Herwijnen, HWG;
5th International conference on structural adhesive bonding 2019
(2019) Force Microscopy to reveal chemical properties of lignocellulosic materials up to the nanometer scale
Autoren: Claudia Gusenbauer, Tiina Nypelö, Etienne Cabane, Johannes Konnerth
The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC)
(2019) Surface and adhesion properties of lignocellulosic model fibers.
Autoren: Konnerth, J; Colson, J; Pettersson, T; Nypelö, T; Sixta, H; Shirin, A; Kneidinger, G; Gusenbauer, C;
The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC)
(2019) Knowledge-based Curing of Phenolic Wood Adhesives.
Autoren: Bliem, P; Gartner, C; Konnerth, J; Solt, P; Mauritz, R; van Herwijnen, HWG;
18. Österreichische Chemietage 2019
(2019) Hydroxymethylfurfural: Production and application in binder-systems
Autoren: Thoma, C.; Sailer-Kronlachner, W.; Solt, P.; Konnerth, J.; van Herwijnen, H.W.G.
18. Österreichische Chemietage 2019
(2019) Engineering of material properties by adhesive selection at the example of a novel structural wood material
Autoren: Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Krenke, T; Mauritz, R; Konnerth, J;
5th International conference on structural adhesive bonding 2019
(2019) Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers I: Mechanical properties
Autoren: Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U;
5th International conference on structural adhesive bonding 2019
(2019) Effect of cold tack on the bond strength of UF resins in plywood production
Autoren: Hogger, E; van Herwijnen, H W G; Kantner, W; Moser, J; Konnerth, J;
13. Holzwerkstoffkolloquium 2019
(2019) Adhesive related warping of thin wooden bi-layers
Autoren: Rindler, A; Vay, O; Hansmann, C; Konnerth, J;
5th International conference on structural adhesive bonding 2019
(2019) Thermal superinsulating monolithic lignin-phenol-formaldehyde aerogels and carbon aerogels of high internal surface
Autoren: Budjav, E; Ghorbani, M; Konnerth, J; Mitterer, C; Unterweger, C; Rigacci, A; Ilbizian, P; Rennhofer, H; Lichtenegger, H; Bernstorff, S; Liebner, F
1st International Lignin Symposium
(2019) Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers II: Electrical properties.
Autoren: Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U;
5th International conference on structural adhesive bonding 2019
(2019) Development of novel carbohydrate-based binders for wood composites
Autoren: Sailer-Kronlachner, W; Thoma, C; Solt, P; Konnerth, J; van Herwijnen, HWG;
18. Österreichische Chemietage 2019
(2019) The importance of cold tack of urea formaldehyde in plywood production
Autoren: Elfriede Hogger, Hendrikus W. G. van Herwijnen, Wolfgang Kantner, Johann Moser, Johannes Konnerth
15th Annual Meeting of the Northern European Network for Wood Science and Engineering WSE 2019
(2019) Hydroxymethylfurfural: production and application in binder-systems
Autoren: Thoma, C; Sailer-Kronlachner, W; Solt, P; Konnerth, J; van Herwijnen, HWG;
18. Österreichische Chemietage 2019
(2018) Polysaccharide film as a ductile substrate for gas phase treatment
Autoren: Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T
255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water
(2018) Colloidal probe technique applied to the assessment of adhesion forces between lignocellulosic fibres and polymers
Autoren: Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelö, T; Konnerth, J
16th Conference of the International Association of Colloid and Interface Scientists (IACIS)
(2018) Conformal ultrathin coating by scCO2-mediated PMMA deposition: A facile approach to add moisture resistance to lightweigth ordered nanocellulose aerogels
Autoren: Plappert, S; Quraishi, S; Nedelec, J-M; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, F
1st Vienna Polymer-Group Symposium ViP 2018
(2018) Thermo-induced gelation of ligneous resole resins: An approach towards mesoporous monolithic aerogels and carbon aerogels
Autoren: Budjav, E; Requejo-Silva, A; Ghorbani, M; Konnerth, J; Liebner, F
1st Vienna Polymer-Group Symposium ViP 2018
(2018) Structural hardwood bonding and the impact of wood accessory compounds
Autoren: Bockel, S; Harling, S; Konnerth, J; Niemz, P; Pichelin, F;
8th Hardwood Conference 2018
(2018) Monitoring of time dependent ammonia emissions in smoked oak using FTIR spectroscopy.
Autoren: Hogger, E; Bauer, K; Höllbacher, E; Gierlinger, N; Konnerth, J; van Herwijnen H W G;
8th Hardwood Conference 2018
(2018) Chemical Force Microscopy for characterising functionalised renewable materials.
Autoren: Gusenbauer, C; Colson, J; Nypelö, T; Cabane, E; Konnerth, J;
Wood Nanotechnology Conference 2018
(2018) Imparting moisture resistance to transparent nematic i-CNF aerogels by scCO2-antisolvent coating of the interior with ultrathin PMMA layers
Autoren: Plappert, S; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, FW
255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water
(2018) Tunable surface energy wood-biopolymer macrofibers
Autoren: Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J
255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water
(2017) Analysis of the cold tack of urea formaldehyde resin as an important factor in birch plywood production.
Autoren: Hogger, E; van Herwijnen, H. W. G; Moser, J; Kantner, W; Konnerth, J;
International Panel Products Symposium IPPS 2017
(2017) Dimensional stability of wood based panels - Contibutions of the adhesive
Autoren: Rindler, A; Hansmann, C; Müller, U; Konnerth, J
IUFRO Division 5 Conference, SWST 60th International Convention 2017
(2017) The impact of molecular weight of Kraft-lignin on adhesive performance of lignin based phenol formaldehyde resins.
Autoren: Solt, P; Konnerth, J; van Herwijnen, HWG;
11th International Conference on Wood Adhesives
(2017) Neue Analysemethoden zur Charakterisierung der chemisch/physikalischen Oberflächeneigenschaften auf Mikroebene
Autoren: Konnerth, J; Herzele, S; Nypelö, T; Colson, J; Van Herwijnen, H; Gindl-Altmutter, W
Swiss Wood Innovation Network, Statusseminar
(2017) Comparison of direct adhesion of thermoplastic polymers to lignocellulosic model fibers.
Autoren: Konnerth, J; Colson, J; Kneidinger, G; Asaadi, S; Sixta, H; Gindl-Altmutter, W; Nypelö, TE;
11th International Conference on Wood Adhesives
(2017) Synthesis, properties and carbonization of different types of ligneous aerogels
Autoren: Budjav, E; Quraishi, S; Ghorbani, M; Konnerth, J; Unterweger, C; Liebner, FW
253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes
(2017) Effect of pressing temperature and moisture content on the curing properties of pMDI
Autoren: Solt, P; Libowitzky, S; van Herwijnen, HWG; Konnerth, J;
11th International Conference on Wood Adhesives
(2017) Wood-based hemicelluloses as renewable source for functional materials
Autoren: Nypelo, T; Amer, H; Laine, C; Tammelin, T; Konnerth, J; Henniges, U; Potthast, A; Rosenau, T
253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes
(2017) Comparable technological evaluation of formaldehyde-free adhesives for the particle board production.
Autoren: van Herwijnen, HWG; Solt, P; Gindl-Altmutter, W; Konnerth, J;
11th International Conference on Wood Adhesives
(2017) Dimensional stability – Contributions of the adhesive layer
Autoren: Rindler, A; Konnerth, J; Müller, U
IUFRO Division 5 Conference, SWST 60th International Convention 2017
(2017) Local adhesion testing on lignocellulosic fibers with Nanoindentation.
Autoren: Herzele, S; van Herwijnen, HWG; Gindl-Altmutter, W; Konnerth, J;
11th International Conference on Wood Adhesives
(2017) Thermo-induced gelation of diluted ligneous resole resin pre-condensates in ethylene glycol: A facile approach towards highly open mesoporous monolithic aerogels and carbon aerogels
Autoren: Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Konnerth, J; Liebner, F
International Conference Renewable Plant Resources 2017 - Chemistry, Technology, Medicine
(2017) The influence of lignin properties on the performance of lignin-phenolic adhesives
Autoren: Solt, P; Ghorbani, M; Konnerth, J; Liebner, F; Van Herwijnen, H
17. Österreichische Chemietage 2017
(2017) Influencing Factors On The Cold Tack Of Urea Formaldehyde Used For Birch Plywood
Autoren: Hogger, E; Konnerth, J; van Herwijnen, HWG;
11th International Conference on Wood Adhesives
(2016) Adhesion force measurements applied to wood-based materials
Autoren: Nypelö, T; Andorfer, L; Konnerth, J
14th European Workshop on Lignocellulosics and Pulp 2016
(2016) Bonding performance of modified wood - distinctive influence of plasma pre-treatments on bonding strength
Autoren: Lütkemeier, B.; Konnerth, J.; Militz, H.
World Conference on Timber Engineering WCTE 2016
(2016) Local Adhesion Testing on Lignocellulosic Fibres with Nanoindentation – A Sample Preparation Technique
Autoren: Herzele, S; Gindl-Altmutter, W; van Herwijnen, E; Konnerth, J
International Academy of Wood Science Plenary Meeting, IAWS 2016
(2016) AFM adhesion force measurements applied to wood-based materials I
Autoren: Nypelö, T; Andorfer, L; Konnerth, J
IX Iberoamerican Congress on Pulp and Paper Research "Building bridges in research and innovation for the sustainable bioeconomy" September 4-8, 2016
(2016) Planing quality of glulam lamellae and its impact on bonding quality and fracture surface characteristics
Autoren: Grüll, G; Wegscheider, A; Konnerth, J; Teischinger, A; Neumüller, A
World Conference on Timber Engineering WCTE 2016
(2016) Lignin phenol formaldehyde resole resin: synthesis and characteristics
Autoren: Ghorbani, M; Mahendran, AR; Van Herwijnen, H; Liebner, F; Konnerth, J
2nd World Congress on Biopolymers 2016
(2016) Step-reaction vs. chain-reaction polymerization of lignin: two facile approaches towards lignin aerogels and carbon aerogels
Autoren: Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Liebner, F
3rd International Aerogel Seminar
(2016) Converting wood into timber and particles - new approaches
Autoren: Mueller, U; Vay, O; Martinez-Conde, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A
World Conference on Timber Engineering WCTE 2016
(2016) Thermo-induced gelation of ligneous resole resin pre-condensates in ethylene glycol: An approach towards mesoporous monolithic aerogels of high internal surface
Autoren: Budjav, E; Requejo, A; Ghorbani, M; Konnerth, J; Liebner, F
14th European Workshop on Lignocellulosics and Pulp 2016
(2016) Performance of Lignin-Phenol-Formaldehyde Adhesives using various Lignin sources
Autoren: Konnerth, J; Ghorbani, M; Van Herwijnen, E; Budjav, E; Liebner, F;
American Chemical Society, 251st National Meeting
(2016) Structure-property relation of films of cellulose nanofibrils containing renewable additives established by chemical mapping
Autoren: Nypelö, T; Laine, C; Henniges, U; Konnerth, J; Tammelin, T
251st National Spring Meeting of the American Chemical Society ACS 2016
(2016) Lignin phenol formaldehyde resole resin: Synthesis and characteristics
Autoren: Ghorbani, M; Liebner, F; van Herwijnen, E; Konnerth, J
4th Symposium on Biotechnology applied to Lignocelluloses
(2015) Selected characteristics of lignin-phenol-formaldehyde resole adhesives.
Autoren: Ghorbani, M; Liebner, F; Van Herwijnen, E; Pfungen, L; Krahofer, M; Konnerth, J;
Innovations in Wood Material and Processes InWood 2015
(2015) Synthesis and Characteristics of Lignin-Phenol-Formaldehyde Resole Adhesives. , Sept. 09-11, Vienna, Austria
Autoren: Ghorbani, M; Liebner, F; Van Herwijnen, E; Pfungen, L; Krahofer, M; Konnerth, J;
18th International Symposium on Wood, Fiber and Pulping Chemistry ISWFPC 2015
(2015) Glueing melamine treated wood
Autoren: Lütkemeier, B; Konnerth, J; Militz, H
8th European Conference on Wood Modification 2015
(2015) Novel applications of Nanoindentation in wood science – Mechanical properties and interface performance of wood cell walls
Autoren: Konnerth, J; Gindl-Altmutter, W
Nanobrücken 2015
(2015) Neue Wege im mechanischen Holzaufschluss - alternative Technologien, Energieeinsparung und Ressourceneffizienz
Autoren: Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J. Teischinger, A.
Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien
(2014) Innovative Trenn- und Aufteiltechnologien
Autoren: Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A.,
16. Holztechnologisches Kolloquium, Dresden
(2014) Stamm-Astanbindung – eine biologisch optimierte Struktur mit hoher mechanischer Leistungsfähigkeit
Autoren: U. Müller, J. Konnerth, W. Gindl-Altmutter, D. Kaserer, J. Keckes
Grazer Holzbau-Fachtagung - GraHFT 2014
(2014) Einfluss der lokalen Polarität auf die Verklebung von Holz
Autoren: Müller, U., Gindl-Altmutter, W., Konnerth, J., Obersiebnig, M., Frybort, S., Steiner, G., Stingl, R.
Kooperationsforum - Kleben von Holz und Holzwerkstoffe - Bayern Innovativ
(2014) Cross industry Innovation process to identify "new" Technologies for mechanical Wood disintegration
Autoren: Vay, O., Konnerth, J., Frybort, S., Krenke, T., Teischinger, A., Müller, U.
57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference
(2013) Gezielte Beeinflussung der lokalen Adhäsion von Klebstoffen an der Holzzellwand
Autoren: Konnerth, J; Gilge, M; Weigl, M; Avramidis, G; Wolkenauer, A; Obersriebnig, M;
Josef Umdsch Workshop 2013 - Plasmamodifikation von Holz
(2013) Nanoindentation for direct evaluation of adhesion at the cell wall-adhesive interface & AFM-based polarity characterization of wood surfaces
Autoren: Konnerth, J; Obersriebnig, M; Frybort, S; Gindl-Altmutter, W;
Int. Conference on Wood Adhesives
(2012) Sub-micron resolution characterisation of wood cell walls with Scanning Near Field Optical Microscopy
Autoren: Tobias Keplinger, Johannes Konnerth, Markus Rüggeberg, Notburga Gierlinger, Ingo Burgert
COST Action FP1105: Understanding wood cell structure, biopolymer interaction and composition. First Workshop
(2010) Acoustic emissions and radial shrinkage behavior of fresh versus pre-dried Norway spruce sapwood
Autoren: Rosner S., Konnerth J., Hansmann C.
11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying
(2010) Strain distribution in a spruce branch-stem junction
Autoren: Johannes Konnerth, Ulrich Müller, Wolfgang Gindl, Christoph Buksnowitz
COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials
(2010) Cellulose fibers and nanofibrils for adhesive reinforcement
Autoren: Veigel, S. , Müller, U., Konnerth, J., Gindl, W.
International Conference on Nanotechnology for the Forest Products Industry
(2010) Possibilities and limits of wood-fibre based composites
Autoren: Teischinger, A., Müller, U., Konnerth, J.
8th Global WPC and Natural Fibre Composites Congress and Exihibition 2010
(2010) Digital image analysis of radial shrinkage of fresh Norway spruce wood
Autoren: Hansmann C., Konnerth J., Rosner S.
11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying
(2010) Full set of elastic constants of spruce wood cell walls determined by Nanoindentation.
Autoren: Konnerth Johannes Buksnowitz Christoph Gindl-Altmutter Wolfgang Hofstetter Karin Jäger Andreas
Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future.
(2010) Caratterizzazione micromeccanica di rivestimenti e sistemi di incollaggio
Autoren: Stöckl Frank Konnerth Johannes Gindl Wolfgang Weigl Martin
Rivestimenti Superficiali e Materiali Compositi per il settore Legno
(2010) Strain distributions around knots in Picea abies (L.) boards subjected to tensile load.
Autoren: Christoph Buksnowitz, Ulrich Müller, Wolfgang Gindl, Johannes Konnerth
COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials
(2010) Macro- and micromechanical properties of red oak wood after selective removal of hemicelluloses.
Autoren: Konnerth Johannes, Eiser Martina, Jäger Andreas, Wimmer Rupert
Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future.
(2009) Experimental techniques Lectures on Atomic Force Microscopy (AFM) and Nanoindentation (NI)
Autoren: Olivier Arnould, Andreas Jäger, Johannes Konnerth
Spring School COST action FP0802 2009 - Wood at the microscale: structural and mechanical fundamentals
(2009) Nanoindentation for characterisation of wood-adhesive bonds
Autoren: Konnerth J Gindl W
International Conference on Wood Adhesives ICWA 2009
(2008) Information potential of acoustic emissions on the dehydration behavior of wood
Autoren: Rosner S., Karlsson B., Konnerth J., Hansmann C.
28th European Conference on Acoustic Emission Testing 2008
(2007) Scanning Thermal Microscopy in wood adhesive bondlines
Autoren: Konnerth J, Rials TG, Harper D, Lee S-H, Gindl W
9th International Conference on Wood & Biofiber Plastic Composites
(2007) Nanoindentation for Characterizing Wood and Related Systems
Autoren: Konnerth Johannes, Gindl Wolfgang
Society of Wood Science and Technology, 50th Annual Convention
(2007) Wood adhesive bondlines by Nanoindentation
Autoren: Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W
13th International Conference on Experimental Mechanics 2007
(2007) Wood adhesive bondlines by Nanoindentation
Autoren: Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W
13th International Conference on Experimental Mechanics 2007
(2006) Mikromechanische Charakterisierung von Holz-Klebefugen mittels Nanoindentation
Autoren: Konnerth J. Müller U. Gindl W.
2. Wiener Biomaterialsymposium 2006
Wheat straw: A feedstock for high performance materials
Autoren: Neudecker, F; Veigel, S; Konnerth, J; Gindl-Altmutter, W
Die steigende Holzbauquote erfordert neueSortimente und effiziente Werkstoffe
Autoren: Pramreiter, M; Konnerth, J
Branch to Beam: A concept to transform deciduous tree assortments into structural wood materials
Autoren: Nenning, T; Konnerth, J; Altmutter G.W.; Grabner, M; Hansmann, C; Pramreiter, M.
Reactive adhesives derived from carbohydrate-based precursors
Autoren: Thoma, Catherine; Sailer-Kronlachner, Wilfried; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, Hendrikus W. G.
Verklebbarkeit von alternativen Holzarten mit pMDI und modifizierten MDI Klebstoffen
Autoren: Fasalek, A; Pramreiter, M; van Herwijnen, H; Konnerth, J;
Mechanical contribution of the adhesive layer to the dimensional stability of multi-layered wood based panels.
Autoren: Rindler, A; Konnerth, J; Hansmann, C; Müller, U