University of Natural Resources and Life Sciences, Vienna (BOKU) - Research portal

Logo BOKU Resarch Portal

Tschegg Stefanie

Unpublished presentations at scientific conferences

Schönbauer, BM; Yanase, K; Stanzl-Tschegg, SE; Endo, M (2016): Fatigue strength prediction of 17-4PH stainless steel.

27. Colloquium on Fatigue Mechanisms, MAR 22-23, 2016, Vienna

Draxler, J., Zitek, A., Tschegg, S., Mingler, B., Weinberg, A. and Prohaska, T. (2014): Mass Spectrometric Imaging (MSI) – Quantification strategy for chemical images measured by LA-ICP-MS .

Pumpaya Meeting 2014, May, 15 - 16, Mosonmagyaróvár

Schönbauer, B; Karr, U; Perlega, A; Stanzl-Tschegg, S (2014): Small crack growth from corrosion pits.

25th Colloquium on Mechanisms of Fatigue, Mar 27-28, 2014, Erlangen

Draxler, J; Fischer, L; Tschegg, S; Mingler, W; Weinberg, A; Prohaska, T (2013): Investigation of degradation products of novel implant materials used in orthopaedic trauma (degIMMAT, Laura Bassi BRIC).

JAF, Apr 15, 2013, Wien

Meischel, M; Celarek; A; Berger, L; Tschegg, E; Weinberg, A; Tschegg, S (2013): Biocompatibility and Degradation of Implants. [Poster]

Project Laura Bassi BRIC Hearing, Apr 16, 2013, Wien

Meischel, M; Celarek, A; Weiß, B; Berger, L; Tschegg, E; Weinberg, A; Tschegg, S; (2013): Interface. [Poster]

Project Laura Bassi BRIC Hearing, Apr 16, 2013, Wien

Meischel, M; Tschegg, S (2013): BOKU Expertise: ESEM/EDX; Micro hardness, Roughness measurement, LA-ICP-MS and IC-PMS, SAXS and WAXS.

Project Meeting BRIC - Bioresorbable Implants for Children, Aug 17, 2013, Graz

Meischel, M; Tschegg, S (2013): Micro hardness.

Project Meeting BRIC - Bioresorbable Implants for Children, Nov 28, 2013, Wien

Meischel, M; Tschegg, S; Berger, L; Tschegg, E; Fischer, L; Prohaska, E; Martinelli, E; Weinberg, A (2013): Biodegradable bone implants. [Poster]

Jahrestagung der Deutschen Gesellschaft für Biomaterialien in Erlangen, Sep 26-28, 2013, Erlangen

Mingler, B; Draxler, J; Hann, S; Tschegg, S; Weinberg, A; Prohaska, T (2013): Untersuchung der Abbauprodukte neuartiger Implantatmaterialien für die Verwendung in der Unfallchirurgie.

Life Science, Feb 14, 2013, Langenlois

Perlega, A; Schönbauer, B; Karr, U; Tschegg, S (2013): Rissausbreitung an mit Lochfraß behaftetem Dampfturbinenstahl.

Arbeitskreissitzung der DVM/DGM AG Materialermüdung, Sep 26-27,2013, Dortmund

Schönbauer, B; Tschegg, S; Perlega, A (2013): Corrosion fatigue and pit-to-crack transition of 12% Cr steel.

24th Colloquium on Mechanisms of Fatigue, Mar 26-27, 2013, Freiberg

Stanzl-Tschegg, S (2013): Fracture resistance and healing processes of wood and bone - parallels of strategies of nature.

5th International Conference on Mechanics of Biomaterials and Tissues, Dec 08-12, 2013, Sitges

Tschegg, EK; Celarek, A; Stanzl-Tschegg, S (2013): Fracture-mechanical properties of growth plates of animals of different ages.

5th International Conference on Mechanics of Biomaterials and Tissues, Dec 08-12, 2013, Sitges

Draxler, J; Fischer, L; Tschegg, S; Meischel, M; Prohaska, T (2012): Investigation of degradation products of novel implant materials used in accident surgery.

Pumpaya Meeting 2012, Sept. 13-14, 2012, Podersdorf am See, Austria

H. Mayer, S. Tschegg, B. Schönbauer (2012): Endurance limits and non-propagating cracks.

From Macro to Nano, Understanding Mechanical Behavior across Length Scales: A Structural Materials Division Symposium in Honor of Robert Ritchie, TMS 2012, March 11-15, Orlando, FL

Schönbauer, B; Tschegg, S (2012): Ultrasonic fatigue testing and results on 12% Cr steam turbine balde steel.

Expert-Workshop: Corrosion -Fatigue Damage and Life Prediction for Steam Turbine Blades, Jul 18-19, 2012, Boston

Fischer, L., Tschegg, S., Weinberg, A. and Hann, S (2011): Determination of metals in tissues of rats implanted with bio degradable Mg alloys used for osteo synthesis.

Pumpaya 2011, May 6 - 7, Köszeg

Schönbauer, B; Stanzl-Tschegg, S (2010): Fatigue Crack Growth in AISI 410 Steam Turbine Steel at a loading freqeuency of 19 kHz.

21. Colloquium on Fatigue Mechanism, Mar 16-14, 2010, Brno

Schönbauer, B; Stanzl-Tschegg, S (2009): Fatigue of copper at very high numbers of cycles.

3. ESIS TC2 Meeting, Apr 20-21, 2009, Leoben

Liebner, F.; Haimer E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M. A.; Wendland, M.; Rosenau, T. (2008): Cellulose aerogels: Highly porous, ultralightweight biomaterials..

American Chemical Society, 235th National Meeting, April 06-10, New Orleans, LA

Stanzl-Tschegg, S; Schönbauer, B (2008): Plastische Verformung und Lebensdauer von polykristallinem Kupfer bei sehr hohen Lastwechselzahlen.

29. Adelbodener Werkstoffseminar, Mar 3-6, 2008, Adelboden

Sinn Gerhard, Ters Thomas, Stanzl-Tschegg Stefanie (2007): Surface Energy and Wettability of Knots and Surrounding Area.

3rd International Symposium on Wood Machining, 21.-23.05.2007, Lausanne

Eder, M., Burgert, I., Stanzl-Tschegg, S (2006): In-situ ESEM deformation studies of single wood cells.

5th Plant Biomechanics Conference , 28.8.-1.9.2006, Stockholm

Sinn, G., Beer, P., Stanzl-Tschegg, S. (2006): Analysis of cutting forces in circumferential flat milling of particle board.

International Conference on Integrated Approach to Wood Structure, Behaviour and Applications. Joint meeting of ESWM and COST Action E35., 15.-17.05.2006, Florenz

Stanzl-Tschegg, S. (2006): Change in the fracture mode and fracture properties of wood with moisture content.

ESWM-COST E35, 14.05.2006-17.05.2006, Florenz

Stanzl-Tschegg, S. (2006): Numerical Modelling of Fracture Behaviour of Wood Subjected to Variable Humidity Conditions.

7th World Congress on Computational Mechanics, 16. - 22. 7. 2006, Los Angeles

Stanzl-Tschegg, S. (2006): Scientific works of Cost E35 action.

XYLEXPO, 18.5.2006, Mailand

Stanzl-Tschegg, SE; Mughrabi, H; Schönbauer, B; Schuller, R (2006): Life time and cyclic slip of copper in the VHCF regime.

Fatigue Damage of Structural Materials VI, Sep 17-22, 2006, Hyannis

Stanzl-Tschegg, S Schönbauer, B (2006): Slip band formation and surface roughness of polycrystalline copper in the VHCF regime.

Slip band formation and surface roughness of polycrystalline copper in the VHCF regime, Mar 24, 2006, Vienna

Tschegg, S. (2006): Interaktion von Cr-Co-Mo Abrieb mit repassivierten TiO2 Oberflächen in der Endoprothetik.

2. Wiener Biomaterialsymposium, 22-11.-24.11.2006, TU Wien

Vasic, S., Tschegg, S. (2006): Experimental and numerical investigation of fracture mechanisms and fracture properties of wood at varying moisture contents.

Marie Curie Conference, 10.-12.4.2006, Manchester

Burgert, I., Tschegg, S., Frühmann, K., Fratzl, P., Keckes, J. (2004): Wood (Micro-)Mechanics.

COST E20 Meeting, 28.02.2004, Florenz

Mayer, H., Stanzl-Tschegg, S. (2004): Fatigue crack initiation and growth in low-weight alloys in the VHC regime.

15th Colloquium on Fundamental Fatigue Mechanisms, 1. - 2. April 2004, Erlangen

Tschegg, S. (2004): Cell Wall Structure and Properties.

COST E20 Meeting, 27.02.2004, Florenz

Burgert, I., Rohr, C., Frühmann, K., Stanzl-Tschegg, S. (2003): Poster #35: Mechanical properties of the underneath compression side of branches of beech (Fagus sylvatica L.).

4th International Plant Biomechanics Conference, 20-25 July 2003, Michigan, USA

Frühmann, K., Burgert, I., Sinn, G., Stanzl-Tscheff, S.E. (2003): Fracture mechanical parameters for the TR - crack propagation system in wood.

2nd International Conference of the ESWM, 26.-28.05.2003, Stockholm, Sweden

Stanzl-Tschegg, S. (2003): Giga-cycle fatigue.

National Institute of Materials Science (NIMS), 4.09.2003, Tsukuba, Japan

Stanzl-Tschegg, S. (2003): Gigacycle fatigue and fatigue crack growth.

ATEM'03, 10.09.2003, Nagoya, Japan

Stanzl-Tschegg, S. (2003): Introduction to fatigue and fracture mechanics seminar.

Nagoya University; Department of Mech. Engineering, 12.09.2003, Nagoya, Japan

Stanzl-Tschegg, S. (2003): Structure and fracture mechanical response of wood.

4th International Plant Biomechanics Conference, 20-25 July 2003, Michigan, USA

Stanzl-Tschegg, S. (2003): Ultrasonic Fatigue and Fracture Mechanics.

Nagoya University; Department of Mech. Engineering, 12.09.2003, Nagoya, Japan

Stanzl-Tschegg, S. (2003): Use of ultrasonic fatigue in the very high cycle regime.

Kyushu University, 1.09.2003, Fukuoka, Japan

Stanzl-Tschegg, S. (2003): Very high cycle fatigue.

Tokyo Institute of Technology (TITECH), 5.09.2003, Tokyo, Japan

Beer, P., Ede, C., Gindl, M., Stanzl-Tschegg, S. (2002): Cutting tests of laminated particle board regarding work of chips plastic deformation.

Wood Science and Engineering in the third Millennium, 20-22 Nov 2002, "Transilvania" University of Brasov, ROMANIA

da Fonte, M., A., Romeiro, F., de Freitas, M., M., Stanzl-Tschegg, S., Tschegg, E., Vasudevan, A. (2002): The environment effect on Fatigue Crack Growth of 7049 aluminium alloy at negative stress ratios..

8th Portuguese Conference on Fracture, Vila Real, UTAD, 20-22 February 2002

Gindl, M., Cabaj, A., Sinn, G., Schmalwieser, A., Eder, M., Stanzl-Tschegg, S. (2002): UV- Behandlung von Synthetischen- und Naturpolymeren.

V. Materialphysikalisches Symposium, 05.07.2002, Seggau, Steiermark

Hinterstoisser, B.*, Burgert, I., Fackler, K., Galhaup, C., Haltrich, D., Kuncinger, T., Messner, K., Schwanninger, M., Srebotnik, E., Steinwender, M., Stefke, B., Tschegg, S. (2002): Wood Modification for higher Quality Composites.

International Symposium on Wood Based Materials, Wood Composites and Chemistry, 19.09.2002 - 20.09.2002, Vienna

Stanzl-Tschegg, S. (2002): Cellulose microfibril angle and tensile properties of wood.

COST Action E20 "Wood Fiber Cell Wall Structure", 30.5.-1.6.2002, Reims

Stanzl-Tschegg, S. (2002): Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining.

, 17.10.2002, OTANIENI, Finnland

Stanzl-Tschegg, S. (2002): Fracture mechanics and micromechanics of wood and wood-composites with regard to wood machining.

COST - 20th Meeting of the Technical Committee on Forests and Forestry Products, 17-19 Oct 2002, Otaniemi (Espoo), Finland

Stanzl-Tschegg, S. (2002): In-situ tensile tests on wood slices: characterisation of structural changes using wide-angle x-ray scattering.

COST Action E20, "Wood Fiber Cell Wall Structure", 30.5.-1.6.2002, Reims

Tschegg, S. (2002): Frequency effects on fatigue and fatigue crack growth in the very-high cycle regime..

Conference: ECF-14 Fracture. September 8-13, Cracow, Poland

Tschegg, S. (2002): Grundlagen der Zerspanung.

Kuchler Holzfachtagung 2002 - "Holzzerspanung und Hackgut", 17. April 2002

Tschegg, S., Burgert, I. (2002): Fracture Mechanics and Micromechanics of Wood and Wood Composites with Regard to Wood Machining..

Vortrag am 22. 3. 2002, BOKU Festsaal (COST Sitzung - Technisches Kommitee)

Beer, P., Kaminski, J., Wierzchon, T., Sokolowska, A., Tschegg, S. (2001): Wood induced electrochemical corrosion of steel..

Proc., 15th International Wood Machining Seminar July30 - Aug 1, Loyola Marymount University, Los Angeles California, USA

Fonte, M., Holper, B., Tschegg, S., Tschegg, E., Vasudevan, A. (2001): The Environment Effect on fatigue Crack Growth Rates in 7049 Aluminium Alloy at Different Load Ratio..

Proc., Sixth International Conference on Biaxaial/Multiaxial Fatigue & Fracture, 25-28 June 2001 - Lisbon, Portugal, Volume II, S. 655-662

Frühmann, K., Reiterer, A., Tschegg, E.K., Stanzl-Tschegg, S.E. (2001): Fracture characteristics of wood under mode I, mode II and mode III loading.

International Conference on Fundamentals of Fracture, 26.-30.03.2001, Cirencester, UK

Teischinger, A., Tschegg, S. (2001): Present and future trends in Austrian wood quality research..

COST E10: Wood for industrial use 5th Workshop: 21.-22 October 2001

Teischinger, A., Tschegg, S. (2001): Present and future trends in Austrian wood quality research..

5th Workshop, Cost Aciton E10 - Wood Properties for Industrial Use. 20.-23. october 2001, Hurdal, Norway

Tschegg, S. (2001): Bruchmechanische Charakterisierung von Holz und Holzwerkstoff..

Analytik-Seminar, BOKU/TU Wien - Wood Kplus

Tschegg, S. (2001): Characterization of wood fracture and reliability..

COST E24 Seminar on the reliability of timber structures, 4-5 May, 2001, Coimbra, Portugal

Tschegg, S. (2001): Life time and fatigue crack growth at very high numbers of cycles..

ICEMS Seminar, TU of Lisbon, May 7, 2001, Lisbon, Portugal

Stanzl-Tschegg, S.E., Mayer, H.R. (2000): Fatigue and Fatigue Crack Growth of Aluminium Alloys..

International Conf. on Fatigue of Structural Materials III, Sept. 16-22, Hyannis, USA

Tschegg, E., Frühmann, K., Tschegg, S.E. (2000): Damage and Fracture Mechanisms during Mode I and III Loading in Wood..

COST 98 Workshop - Damage in Wood 27th/28th May 1999, Bordeaux, France

Tschegg, E.K., Catharin, A., Stanzl-Tschegg, S.E. (2000): Healing Behaviour of Reflective Cracks..

Proc. 4th Int. RILEM Conf. on Reflective Cracks in Pavement, March 26-30, Ottawa, Canada

Tschegg, S. (2000): Struktur und Eigenschaften von Holz hinsichtlich seiner Belastbarkeit..

"Kamptal-Seminar", 22. Nov. - 26. Nov., Schloß Seggau bei Leibnitz

Tschegg, S.E. (2000): Brucheigenschaften und Struktur von Holz..

CD-Gesellschaft, 6.10.2000, Graz

Tschegg, S.E., Mayer, H.R., Zettl, B. (2000): Fatigue and Fatigue Crack Growth of Aluminium Alloys of Very High Numbers of Cycles..

International Conf. on Fatigue of Structural Materials III, Sept. 16-22, Hyannis, USA

Papakyriacou, M., Stanzl-Tschegg, S. E (1999): Surfaces of improved implants..

3rd Intern. Meeting EC Biomed 2 Project, March, 30, 1999, Vienna, Austria

Stanzl-Tschegg, S., Bathias, C., Topper, T. (1999): Is there a fatigue limit..

7th International Fatigue Congress, Fatigue ´99, 8.-12.06.1999, Bejing, China

Stanzl-Tschegg, S.E. (1999): Holzeigenschaften und Struktur, Bruchmechanik von Holz und Holzwerkstoffen, Charakterisierung von Holzoberflächen..

25 Jahre Studium der Holzwirtschaft an der Universität für Bodenkultur Wien, 12. Nov. 1999, Wien, Austria

Stanzl-Tschegg, S.E. (1999): Überblick über die Arbeiten am CD-Labor für Grundlagen der Holzbearbeitung..

Diskussionsrunde zum Thema Grundlagen der Holzbearbeitung, 3.12.1999, Universität für Bodenkultur

Tschegg, E., Frühmann, K., Stanzl-Tschegg, S.E. (1999): Damage and Fracture Mechanisms during Mode I and III Loading in Wood.

COST 98 Workshop - Damage in Wood, 26.-28.05.1999, Bordeaux, France

Tschegg, S. (1999): Bemerkungen zur Umfrage "Wissenschaft in der öffentlichen Wahrnehmung"; Frauen an den Universitäten.

Vortrag, 5. 8. 1999, UPV-Präsidium, Hotel Hilton, Wien

Zettl, B., Stanzl-Tschegg, S. E. (1999): Fatigue and vibration properties of aluminium foam..

Proc., Bremen

Lichtenegger, H., Reiterer, A., Tschegg, S., Fratzl, P. (1998): Die Nanostruktur der Holzzellwand: vier heimische Holzarten im Vergleich..

Posterbeitrag zur 48. Haupttagung der Österreichischen Physikalischen Gesellschaft, Fachgebiet Medizinische Physik und Biophysik, Sept. 1998, Graz

Mayer, H., Rösch, R., Lipowsky, H., Zettl, B., Papakyriacou, M., Stanzl-Tschegg, S.E. (1998): Fatigue properties of high pressure die cast magnesium alloys..

Proc. 1st Israeli Conf. on Magnesium Science and Technology, 145-150. Jerusalem, Israel. 10 -12 November 1997, Dead Sea, Israel

Stanzl-Tschegg, S.E. (1998): Characterization of the Properties of Wood and Wood Products by Combination of Different Experimental Methods..

Vortrag, 19. März 1998, ETH Zürich

Gäbler, C., Heinz, T., Kulka, C., Wozasek, G.E., Tschegg, S.E., Tschegg, E.K., Vecsei, V. (1997): Implant Failure of the Gamma Nail..

Osteosynthese International, 16.-18. Oct. 1997, Louisville, Kentucky, USA

Krepler, P., Wurnig, Ch., Tschegg, S.E. (1997): Prothesenhalsfraktur bei Hüftendoprothesen - eine Analyse von 6 Fällen..

Deutsch-Österr. Orthopädenkongreß 1997, 17.-21.9.97, Wien

Reiterer, A., Lichtenegger, H., Stanzl-Tschegg, S.E., Fratzl, P. (1997): Spiral Angles of Elementary Cellulose Fibrils and Tensile Properties of Spruce Wood..

International Conference on the Significance of Microfibril Angle to Wood Quality, New Zealand, Westport, University Canterbury, Nov. 21-26

Reiterer, A., Stanzl-Tschegg, S.E. (1997): Bruchmechanische Konzepte in der Holzforschung..

Materialphysikalisches Kamptalseminar, 16. - 19. Okt. 1997, Zöbing am Kamp

Rödhammer, M., Reiterer, A., Stanzl-Tschegg, S.E. (1997): Untersuchung von Interface-Bindung und Biokompatibilität von Kieferimplantaten..

Materialphysikalisches Kamptalseminar, 16. - 19. Okt. 1997, Zöbing am Kamp

Stanzl-Tschegg, S.E., Papakyriacou, M (1997): Fatigue Properties of Implant Materials - Measuring Techniques and SN-Results..

1st EC-Biomed 2 project meeting, 5.- 6. July 1997, Leuven, Belgium

Stanzl-Tschegg, S.E., Papakyriacou, M., Mayer, H., Schijve, J. (1991): High Cycle Fatigue Crack Growth Properties of Aramid Reinforced Aluminium Laminates:.

4th Symposion on Composite Materials, Fatigue and Fracture, Texas, USA, May 1, 1991

© BOKU Wien Imprint