BOKU - Universität für Bodenkultur Wien - Forschungsinformationssystem

Konnerth Johannes



** = Publikationen in SCI/SSCI gelisteten Journalen, im Web of Science veröffentlicht
* = Publikation in peer-reviewtem Journal (nicht im SCI/SSCI gelistet)
Filter: Originalarbeit, Übersichtsarbeit, Konferenzband Originalarbeit

 

2019

Originalbeitrag in Fachzeitschrift

** Bader, M; Nemeth, R; Konnerth, J Micromechanical properties of longitudinally compressed wood.

EUR J WOOD WOOD PROD. 2019; 77(3): 341-351. WoS FullText FullText_BOKU

** Bockel, S; Mayer, I; Konnerth, J; Harling, S; Niemz, P; Swaboda, C; Beyer, M; Bieri, N; Weiland, G; Pichelin, F The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems.

INT J ADHES ADHES. 2019; 91: 43-53. WoS FullText FullText_BOKU

** Gusenbauer, C; Cabane, E; Gierlinger, N; Colson, J; Konnerth, J; Visualization of the Stimuli-responsive Surface Behavior of Functionalized Wood Material by Chemical Force Microscopy..

Sci Rep. 2019; 9(1):18569 WoS PubMed FullText FullText_BOKU

** Hogger, E; Bauer, K; Hollbacher, E; Gierlinger, N; Konnerth, J; van Herwijnen, HWG Time-dependent ammonia emissions from fumed oak wood determined by micro-chamber/thermal extractor (mu CTE) and FTIR-ATR spectroscopy.

HOLZFORSCHUNG. 2019; 73(2): 165-170. WoS FullText FullText_BOKU

** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Influence of cold tack properties on bond performance of cured urea-formaldehyde resin.

EUR J WOOD WOOD PROD. 2019; 77(3): 487-490. WoS FullText FullText_BOKU

** Plappert, SF; Liebner, FW; Konnerth, J; Nedelec, JM Anisotropic nanocellulose gel-membranes for drug delivery: Tailoring structure and interface by sequential periodate-chlorite oxidation.

CARBOHYD POLYM. 2019; 226, UNSP 115306 WoS PubMed FullText FullText_BOKU

** Rindler, A; Hansmann, C; Konnerth, J The effect of moisture on the mechanical response of wood, adhesive and their interphase by means of nanoindentation.

WOOD SCI TECHNOL. 2019; 53(4): 729-746. WoS FullText FullText_BOKU

** Rindler, A; Vay, O; Hansmann, C; Konnerth, J Adhesive-related warping of thin wooden bi-layers.

WOOD SCI TECHNOL. 2019; 53(5): 1015-1033. WoS FullText FullText_BOKU

** Shah, DU; Konnerth, J; Ramage, MH; Gusenbauer, C Mapping thermal conductivity across bamboo cell walls with scanning thermal microscopy.

SCI REP-UK. 2019; 9, 16667 WoS PubMed FullText FullText_BOKU

** SOlt, P; Konnerth, J; Gindl-Altmutter, W; Kantner, W; Moser, J; Mitter, R; van Herwijnen, HWG Technological performance of formaldehyde-free adhesive alternatives for particleboard industry.

INT J ADHES ADHES. 2019; 94: 99-131. WoS FullText FullText_BOKU

** Solt, P; van Herwijnen, HWG; Konnerth, J Thermoplastic and moisture-dependent behavior of lignin phenol formaldehyde resins.

J APPL POLYM SCI. 2019; 136(40), 48011 WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Averina, E; van Herwijnen, HWG; Konnerth, J; (2019): Wood adhesives based on domestic plant proteins.
[18. Österreichische Chemietage, Linz, AUSTRIA, SEPT 24-27, 2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

Bliem, P; Gartner, C; Konnerth, J; Solt, P; Mauritz, R; van Herwijnen, HWG; (2019): Knowledge-based Curing of Phenolic Wood Adhesives. .
[18. Österreichische Chemietage, Linz, AUSTRIA, SEPT 24-27, 2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

Budjav, E; Ghorbani, M; Konnerth, J; Mitterer, C; Unterweger, C; Rigacci, A; Ilbizian, P; Rennhofer, H; Lichtenegger, H; Bernstorff, S; Liebner, F (2019): Thermal superinsulating monolithic lignin-phenol-formaldehyde aerogels and carbon aerogels of high internal surface . [Poster]
[1st International Lignin Symposium, Sapporo, JAPAN, SEP 13-15, 2019]

In: Hokkaido University, 1st International Lignin Symposium, Book of Abstracts

Sailer-Kronlachner, W; Thoma, C; Solt, P; Konnerth, J; van Herwijnen, HWG; (2019): Development of novel carbohydrate-based binders for wood composites.
[18. Österreichische Chemietage, Linz, AUSTRIA, SEPT 24-27, 2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

Thoma, C; Sailer-Kronlachner, W; Solt, P; Konnerth, J; van Herwijnen, HWG; (2019): Hydroxymethylfurfural: production and application in binder-systems.
[18. Österreichische Chemietage, Linz, AUSTRIA, SEPT 24-27, 2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

2018

Originalbeitrag in Fachzeitschrift

** Bliem, P; van Herwijnen, HWG; Riegler, M; Konnerth, J Investigation of important influencing factors on the tensile shear strength of two component polyurethane with distinct foaming behaviour.

INT J ADHES ADHES. 2018; 84: 343-349. WoS FullText FullText_BOKU

** Bockel, S; Mayer, I; Konnerth, J; Niemz, P; Swaboda, C; Beyer, M; Harling, S; Weiland, G; Bieri, N; Pichelin, F Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding.

J ADHESION. 2018; 94(10): 829-845. WoS FullText FullText_BOKU

** Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelo, T; Mautner, A; Konnerth, J Adhesion properties of regenerated lignocellulosic fibres towards poly (lactic acid) microspheres assessed by colloidal probe technique.

J COLLOID INTERF SCI. 2018; 532: 819-829. WoS PubMed FullText FullText_BOKU

** Ghorbani, M; Konnerth, J; van Herwijnen, HWG; Zinovyev, G; Budjav, E; Silva, AR; Liebner, F Commercial lignosulfonates from different sulfite processes as partial phenol replacement in PF resole resins.

J APPL POLYM SCI. 2018; 135(8): WoS FullText FullText_BOKU

** Ghorbani, M; Liebner, F; van Herwijnen, HWG; Solt, P; Konnerth, J Ligneous resole adhesives for exterior-grade plywood.

EUR J WOOD WOOD PROD. 2018; 76(1): 251-258. WoS FullText FullText_BOKU

** Ghorbani, M; Mahendran, AR; van Herwijnen, HWG; Liebner, F; Konnerth, J Paper-based laminates produced with kraft lignin-rich phenol-formaldehyde resoles meet requirements for outdoor usage.

EUR J WOOD WOOD PROD. 2018; 76(2): 481-487. WoS FullText FullText_BOKU

** Herzele, S; van Herwijnen, HWG; Edler, M; Gindl-Altmutter, W; Konnerth, J Cell-layer dependent adhesion differences in wood bonds.

COMPOS PART A-APPL S. 2018; 114: 21-29. WoS FullText FullText_BOKU

** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Cold tack of urea formaldehyde resins as an important factor in plywood production.

EUR J WOOD WOOD PROD. 2018; 76(5): 1391-1398. WoS FullText FullText_BOKU

** Lutkemeier, B; Konnerth, J; Militz, H Distinctive Impact of Processing Techniques on Bonding Surfaces of Acetylated and Heat-Treated Beech Wood and Its Relation to Bonding Strength.

FOREST PROD J. 2018; 68(4): 372-382. WoS FullText FullText_BOKU

** Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T Self-Standing Nanocellulose Janus-Type Films with Aldehyde and Carboxyl Functionalities.

BIOMACROMOLECULES. 2018; 19(3): 973-979. WoS PubMed FullText FullText_BOKU

** Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J Conversion of wood-biopolymers into macrofibers with tunable surface energy via dry-jet wet-spinning.

CELLULOSE. 2018; 25(9): 5297-5307. WoS PubMed FullText FullText_BOKU

** Plappert, SF; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, HC; Liebner, FW Conformal Ultrathin Coating by scCO(2)-Mediated PMMA Deposition: A Facile Approach To Add Moisture Resistance to Lightweight Ordered Nanocellulose Aerogels.

CHEM MATER. 2018; 30(7): 2322-2330. WoS FullText FullText_BOKU

** Rindler, A; Poll, C; Hansmann, C; Muller, U; Konnerth, J Moisture related elastic and viscoelastic behaviour of wood adhesives by means of in-situ nanoindentation.

INT J ADHES ADHES. 2018; 85: 123-129. WoS FullText FullText_BOKU

** Solt, P; Jaaskelainen, AS; Lingenfelter, P; Konnerth, J; van Herwijnen, HWG Impact of Molecular Weight of Kraft Lignin on Adhesive Performance of Lignin-Based Phenol-Formaldehyde Resins.

FOREST PROD J. 2018; 68(4): 365-371. WoS FullText FullText_BOKU

** Solt, P; Rossiger, B; Konnerth, J; van Herwijnen, HWG Lignin Phenol Formaldehyde Resoles Using Base-Catalysed Depolymerized Kraft Lignin.

POLYMERS-BASEL. 2018; 10(10): WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

** Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T Polysaccharide film as a ductile substrate for gas phase treatment.
[255th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nexus of Food, Energy, and Water, New Orleans, LA, MAR 18-22, 2018]

ABSTR PAP AM CHEM S. 2018; 255: WoS

** Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J Tunable surface energy wood-biopolymer macrofibers.
[255th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nexus of Food, Energy, and Water, New Orleans, LA, MAR 18-22, 2018]

ABSTR PAP AM CHEM S. 2018; 255: WoS

** Plappert, S; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, FW Imparting moisture resistance to transparent nematic i-CNF aerogels by scCO2-antisolvent coating of the interior with ultrathin PMMA layers.
[255th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nexus of Food, Energy, and Water, New Orleans, LA, MAR 18-22, 2018]

ABSTR PAP AM CHEM S. 2018; 255: WoS

Bockel, S; Harling, S; Konnerth, J; Niemz, P; Pichelin, F; (2018): Structural hardwood bonding and the impact of wood accessory compounds.
[8th Hardwood Conference, Sopron, Hungary, OCT 25-26, 2018]

In: Róbert Németh, Alfred Teischinger, Peter Rademacher, Miklós Bak (Eds.), 8TH HARDWOOD CONFERENCE WITH SPECIAL FOCUS ON “NEW ASPECTS OF HARDWOOD UTILIZATION - FROM SCIENCE TO TECHNOLOGY” HARDWOOD CONFERENCE PROCEEDINGS VOLUME 8 FullText

Budjav, E; Requejo-Silva, A; Ghorbani, M; Konnerth, J; Liebner, F (2018): Thermo-induced gelation of ligneous resole resins: An approach towards mesoporous monolithic aerogels and carbon aerogels. [Poster]
[1st Vienna Polymer-Group Symposium (ViP), Vienna, AUSTRIA, FEB 27, 2018]

In: Vienna University, 1st Vienna Polymer-Group Symposium (ViP), Book of Abstracts

Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelö, T; Konnerth, J (2018): Colloidal probe technique applied to the assessment of adhesion forces between lignocellulosic fibres and polymers.
[16th Conference of the International Association of Colloid and Interface Scientists (IACIS), Rotterdam, THE NETHERLANDS, MAY 21-25, 2018]

In: International Association of Colloid and Interface Scientists, Proceedings of the 16th Conference of the International Association of Colloid and Interface Scientists (IACIS)

Gusenbauer, C; Colson, J; Nypelö, T; Cabane, E; Konnerth, J; (2018): Chemical Force Microscopy for characterising functionalised renewable materials..
[Wood Nanotechnology Conference 2018, Ascona, SWITZERLAND, SEP 2-5, 2018]

In: ETH Zürich, Wood Nanotechnology 2018

Plappert, S; Quraishi, S; Nedelec, J-M; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, F (2018): Conformal ultrathin coating by scCO2-mediated PMMA deposition: A facile approach to add moisture resistance to lightweigth ordered nanocellulose aerogels. [Poster]
[1st Vienna Polymer-Group Symposium (ViP), Vienna, AUSTRIA, FEB 27, 2018]

In: Vienna University, 1st Vienna Polymer-Group Symposium (ViP), Book of Abstracts

2017

Originalbeitrag in Fachzeitschrift

** Colson, J; Andorfer, L; Nypelo, TE; Lutkemeier, B; Stockel, F; Konnerth, J Comparison of silicon and OH-modified AFM tips for adhesion force analysis on functionalised surfaces and natural polymers.

COLLOID SURFACE A. 2017; 529: 363-372. WoS FullText FullText_BOKU

** Ghorbani, M; Konnerth, J; Budjav, E; Silva, AR; Zinovyev, G; van Herwijnen, HWG; Edler, M; Griesser, T; Liebner, F Ammoxidized Fenton-Activated Pine Kraft Lignin Accelerates Synthesis and Curing of Resole Resins.

POLYMERS-BASEL. 2017; 9(2): WoS FullText FullText_BOKU

** Winter, A; Andorfer, L; Herzele, S; Zimmermann, T; Saake, B; Edler, M; Griesser, T; Konnerth, J; Gindl-Altmutter, W Reduced polarity and improved dispersion of microfibrillated cellulose in poly(lactic-acid) provided by residual lignin and hemicellulose.

J MATER SCI. 2017; 52(1): 60-72. WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Konnerth, J; Liebner, F (2017): Thermo-induced gelation of diluted ligneous resole resin pre-condensates in ethylene glycol: A facile approach towards highly open mesoporous monolithic aerogels and carbon aerogels.
[2017 International Conference: Renewable Plant Resources - Chemistry, Technology, Medicine., Saint Petersburg, RUSSIA, SEP 18-22, 2017]

In: Saint Petersburg State Forest Technical University, 2017 International Conference: Renewable Plant Resources - Chemistry, Technology, Medicine. Book of Abstracts

Budjav, E; Quraishi, S; Ghorbani, M; Konnerth, J; Unterweger, C; Liebner, F (2017): Synthesis, properties and carbonization of different types of ligneous aerogels.
[American Chemical Society, 253rd National Meeting, San Francisco, CA, USA, 02.04.2017 - 06.04.2017]

In: American Chemical Society, 253th National Spring Meeting and Exhibition of the American Chemical Society, Book of Abstracts

Herzele, S; van Herwijnen, HWG; Gindl-Altmutter, W; Konnerth, J; (2017): Local adhesion testing on lignocellulosic fibers with Nanoindentation..
[11th International Conference on Wood Adhesives, Atlanta, Oct 25-27, 2017]

In: Forest Products Society, Wood adhesives 2017

Hogger, E; Konnerth, J; van Herwijnen, HWG; (2017): Influencing Factors On The Cold Tack Of Urea Formaldehyde Used For Birch Plywood.
[11th International Conference on Wood Adhesives, Atlanta, Oct 25-27, 2017]

In: Forest Products Society, Wood adhesives 2017

Konnerth, J; Colson, J; Kneidinger, G; Asaadi, S; Sixta, H; Gindl-Altmutter, W; Nypelö, TE; (2017): Comparison of direct adhesion of thermoplastic polymers to lignocellulosic model fibers..
[11th International Conference on Wood Adhesives, Atlanta, Oct 25-27, 2017]

In: Forest Products Society, Wood adhseisves 2017

Nypelo, T; Amer, H; Laine, C; Tammelin, T; Konnerth, J; Henniges, U; Potthast, A; Rosenau, T (2017): Wood-based hemicelluloses as renewable source for functional materials .
[American Chemical Society, 253rd National Meeting, San Francisco, CA, USA, 02.04.2017 - 06.04.2017]

In: American Chemical Society, 253rd ACS National Spring Meeting & Exposition, Book of Abstracts

Rindler, A; Hansmann, C; Müller, U; Konnerth, J (2017): Dimensional stability of wood based panels - Contibutions of the adhesive .
[IUFRO Divison 5 and SWST International Conference 2017 , Vancouver, CANADA, June 15, 2017]

In: IUFRO, University of Britisch Columbia, FPInnovations, Society Wood Science & Technology, IUFRO Division 5 Conference, Final Program, Proceedings and Abstract; ISBN: 978-0-9817876-7-1

Rindler, A; Konnerth, J; Hansmann, C; Müller, U (2017): Mechanical contribution of the adhesive layer to the dimensional stability of multi-layered wood based panels. .
[CompWood 2017, Vienna, AUSTRIA, June 2-7, 2017]

In: TU Verlag, IMWS Vienna University of Technology, The CompWood 2017 Programme & Book of Abstracts; ISBN: 9783903024496

Rindler, A; Konnerth, J; Müller, U (2017): Dimensional stability – Contributions of the adhesive layer.
[IUFRO Division 5 Conference 2017, Vancouver, CANADA, June 12-16, 2017]

In: IUFRO Division 5, IUFRO Division 5 Conference, Final Program, Proceedings, Abstracts; ISBN: 978–0–9817876–7-1

Solt, P; Konnerth, J; van Herwijnen, HWG; (2017): The impact of molecular weight of Kraft-lignin on adhesive performance of lignin based phenol formaldehyde resins..
[11th International Conference on Wood Adhesives, Atlanta, Oct 25-27, 2017]

In: Forest Products Society, Wood adhesives 2017

Solt, P; Libowitzky, S; van Herwijnen, HWG; Konnerth, J; (2017): Effect of pressing temperature and moisture content on the curing properties of pMDI. [Poster]
[11th International Conference on Wood Adhesives, Atlanta, Oct 25-27, 2017]

In: Forest Products Society, Wood adhesives 2017

van Herwijnen, HWG; Solt, P; Gindl-Altmutter, W; Konnerth, J; (2017): Comparable technological evaluation of formaldehyde-free adhesives for the particle board production..
[11th International Conference on Wood Adhesives, Atlanta, Oct 25-27, 2017]

In: Forest Products Society, Wood adhesives 2017

2016

Originalbeitrag in Fachzeitschrift

** Ghorbani, M; Liebner, F; van Herwijnen, HWG; Pfungen, L; Krahofer, M; Budjav, E; Konnerth, J Lignin Phenol Formaldehyde Resoles: The Impact of Lignin Type on Adhesive Properties.

BIORESOURCES. 2016; 11(3): 6727-6741. WoS FullText FullText_BOKU

** Konnerth, J; Kluge, M; Schweizer, G; Miljkovic, M; Gindl-Altmutter, W Survey of selected adhesive bonding properties of nine European softwood and hardwood species.

EUR J WOOD WOOD PROD. 2016; 74(6): 809-819. WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Liebner, F (2016): Step-reaction vs. chain-reaction polymerization of lignin: two facile approaches towards lignin aerogels and carbon aerogels.
[3rd International Aerogel Seminar, Sophia Antipolis, FRANCE, SEP 22-23, 2016]

In: International Society for the Advancement of Supercritical Fluids, 3rd International Aerogel Seminar, Proceedings

Budjav, E; Requejo, A; Ghorbani, M; Konnerth, J; Liebner, F (2016): Thermo-induced gelation of ligneous resole resin pre-condensates in ethylene glycol: An approach towards mesoporous monolithic aerogels of high internal surface. [Poster]
[14th European Workshop on Lignocellulosics and Pulp, Autrans, FRANCE, JUN 28- JUL 1, 2016]

In: Chirat, C (Ed.), 14th European Workshop on Lignocellulosics and Pulp, Proceedings, 193-196

Ghorbani, M; Liebner, F; van Herwijnen, E; Konnerth, J (2016): Lignin phenol formaldehyde resole resin: Synthesis and characteristics.
[4th Symposium on Biotechnology applied to Lignocelluloses, Madrid, SPAIN , JUN 19-22, 2016 ]

In: Chirat, C (Ed.) , 14th European Workshop on Lignocellulosics and Pulp

Grüll, G; Wegscheider, A; Konnerth, J; Teischinger, A; Neumüller, A (2016): Planing quality of glulam lamellae and its impact on bonding quality and fracture surface characteristics.
[World Conference on Timber Engineering (WCTE 2016), Wien, AUG 22-25, 2016]

In: J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll,, CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016); ISBN: 978-3-903039-00-1

Konnerth, J; Ghorbani, M; Van Herwijnen, E; Budjav, E; Liebner, F; (2016): Performance of Lignin-Phenol-Formaldehyde Adhesives using various Lignin sources.
[American Chemical Society, 251st National Meeting, San Diego, USA, 13.03.2016 - 17.03.2016]

In: American Chemical Society, 251st ACS American Chemical Society National Meeting & Exposition Computers in Chemistry, http://www.acs.org/content/acs/en/meetings/spring-2016.html#acssandiego

Lütkemeier, B.; Konnerth, J.; Militz, H. (2016): Bonding performance of modified wood - distinctive influence of plasma pre-treatments on bonding strength.
[World Conference on Timber Engineering (WCTE 2016), Wien, AUG 22-25, 2016]

In: Eds.: J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll, , CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016); ISBN: 978-3-903039-00-1

Mueller, U; Vay, O; Martinez-Conde, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A (2016): Converting wood into timber and particles - new approaches .
[World Conference on Timber Engineering (WCTE 2016), Vienna, August 22-25, 2016]

In: J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Eds.), CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016); ISBN: 978-3-903039-00-1

Nypelö, T; Andorfer, L; Konnerth, J (2016): Adhesion force measurements applied to wood-based materials. [Poster]
[14th European Workshop on Lignocellulosics and Pulp, Autrans, FRANCE, Jun 28- Jul 1, 2016]

In: Chirat, C (Ed.), 14th European Workshop on Lignocellulosics and Pulp, Proceedings, 51-54

Nypelö, T; Andorfer, L; Konnerth, J (2016): AFM adhesion force measurements applied to wood-based materials I. [Poster]
[IX Iberoamerican Congress on Pulp and Paper Research "Building bridges in research and innovation for the sustainable bioeconomy" September 4-8, 2016, Espoo, FINLAND, SEP 4-8, 2016]

In: Red Iberoamericana de Docencia de Investigación en Celulosa y Papel, IX Iberoamerican Congress on Pulp and Paper Research, Book of Abstracts

Nypelö, T; Laine, C; Henniges, U; Konnerth, J; Tammelin, T (2016): Structure-property relation of films of cellulose nanofibrils containing renewable additives established by chemical mapping.
[251th ACS National Spring Meeting & Exposition, San Diego, CA, USA , MAR 13-17, 2016]

In: American Chemical Society, 251th ACS National Spring Meeting & Exposition, Book of Abstracts

2015

Originalbeitrag in Fachzeitschrift

** Müller, U; Gindl-Altmutter, W; Konnerth, J; Maier, GA; Keckes, J; Synergy of multi-scale toughening and protective mechanisms at hierarchical branch-stem interfaces..

Sci Rep. 2015; 5:14522 WoS PubMed PUBMED Central FullText FullText_BOKU

* Müller, U., Vay, O., Martinez-Conde Lopez, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A. (2015): Innovative mechanische Trenntechnologien von Holz.

Holztechnologie, 56, 29-34; ISSN 0018-3881

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Ghorbani, M; Liebner, F; Van Herwijnen, E; Pfungen, L; Krahofer, M; Konnerth, J; (2015): Synthesis and Characteristics of Lignin-Phenol-Formaldehyde Resole Adhesives. , Sept. 09-11, Vienna, Austria. [Poster]
[18th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry), Vienna, AUSTRIA, 09.09.2015 - 11.09.2015]

In: BOKU, Department of Chemistry, 2015 J. Hell, S. Böhmdorfer, A. Potthast, T. Rosenau (eds.), 18th ISWFPC International Symposium on Wood, Fibre and Pulping Chemistry Proceedings Vol. II; ISBN: 978-3-900932-24-4

Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J. Teischinger, A. (2015): Neue Wege im mechanischen Holzaufschluss - alternative Technologien, Energieeinsparung und Ressourceneffizienz .
[Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien, Regensburg, 12.11.2015]

In: Bayern Innovativ Bayerisches Staatsministerium für Wirtschaft und Medien, Energie und Technologie, Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien

2014

Originalbeitrag in Fachzeitschrift

** Ammann, S; Obersriebnig, M; Konnerth, J; Gindl-Altmutter, W; Niemz, P Comparative adhesion analysis at glue joints in European beech and Norway spruce wood by means of nanoindentation.

INT J ADHES ADHES. 2014; 50: 45-49. WoS FullText FullText_BOKU

** Beaugrand, J; Nottez, M; Konnerth, J; Bourmaud, A Multi-scale analysis of the structure and mechanical performance of woody hemp core and the dependence on the sampling location.

IND CROP PROD. 2014; 60: 193-204. WoS FullText FullText_BOKU

** Frybort, S; Obersriebnig, M; Muller, U; Gindl-Altmutter, W; Konnerth, J Variability in surface polarity of wood by means of AFM adhesion force mapping.

COLLOID SURFACE A. 2014; 457: 82-87. WoS FullText FullText_BOKU

** Keplinger, T; Konnerth, J; Aguie-Beghin, V; Ruggeberg, M; Gierlinger, N; Burgert, I A zoom into the nanoscale texture of secondary cell walls.

PLANT METHODS. 2014; 10: WoS PubMed PUBMED Central FullText FullText_BOKU

** Konnerth, J; Weigl, M; Gindl-Altmutter, W; Avramidis, G; Wolkenhauer, A; Viol, W; Gilge, M; Obersriebnig, M Effect of plasma treatment on cell-wall adhesion of urea-formaldehyde resin revealed by nanoindentation.

HOLZFORSCHUNG. 2014; 68(6): 707-712. WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A., (2014): Innovative Trenn- und Aufteiltechnologien.
[16. Holztechnologisches Kolloquium, Dresden, Dresden, 03.-04.04.2014]

In: Technische Universität Dresden, Institut für Holz- und Papiertechnik, Tagungsband des 16. holztechnologischen Kolloquiums, Dresden, TU Dresden, Schriftenreihe Holz- und Papiertechnik, Band 12, ISBN 978-3-86780-385-4, S. 113-120

U. Müller, J. Konnerth, W. Gindl-Altmutter, D. Kaserer, J. Keckes (2014): Stamm-Astanbindung – eine biologisch optimierte Struktur mit hoher mechanischer Leistungsfähigkeit.
[Grazer Holzbau-Fachtagung - GraHFT 2014, Graz, 26th Sept. ]

In: Brandner, R. , Bionische Tragstrukturen im Holzbau - Grazer Holzbau-Fachtagung - GraHFT 2014, Institut für Holzbau und Holztechnologie, Technische Universität Graz 978-3-85125-368-9

Vay, O., Konnerth, J., Frybort, S., Krenke, T., Teischinger, A., Müller, U. (2014): Cross industry Innovation process to identify "new" Technologies for mechanical Wood disintegration. [Poster]
[57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference, Zvolen, 23-27 june 2014]

In: Society of Wood Science and Technology, Monona, WI, US, 57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference, p 909-913, ISBN 978-0-9817876-4-0

2013

Originalbeitrag in Fachzeitschrift

** Obersriebnig, M; Konnerth, J; Gindl-Altmutter, W Evaluating fundamental position-dependent differences in wood cell wall adhesion using nanoindentation.

INT J ADHES ADHES. 2013; 40: 129-134. WoS FullText FullText_BOKU

** Stoeckel, F; Konnerth, J; Gindl-Altmutter, W Mechanical properties of adhesives for bonding wood-A review.

INT J ADHES ADHES. 2013; 45: 32-41. WoS FullText FullText_BOKU

** Vay, O; Obersriebnig, M; Muller, U; Konnerth, J; Gindl-Altmutter, W Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM).

HOLZFORSCHUNG. 2013; 67(2): 155-159. WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Konnerth, J; Obersriebnig, M; Frybort, S; Gindl-Altmutter, W; (2013): Nanoindentation for direct evaluation of adhesion at the cell wall-adhesive interface & AFM-based polarity characterization of wood surfaces.
[Int. Conference on Wood Adhesives, Toronto, Canada, OCT 9-11, 2013]

In: Forest Products Society, International Conference on Wood Adhesives 2013, ISBN: 987-0-935018-37-0

2012

Originalbeitrag in Fachzeitschrift

** Gindl-Altmutter, W; Muller, U; Konnerth, J The significance of lap-shear testing of wood adhesive bonds by means of Volkersen's shear lag model.

EUR J WOOD WOOD PROD. 2012; 70(6): 903-905. WoS FullText FullText_BOKU

** Konnerth, J; Muller, U; Gindl, W; Buksnowitz, C Reliability of wood adhesive bonds in a 50 year old glider construction.

EUR J WOOD WOOD PROD. 2012; 70(1-3): 381-384. WoS FullText FullText_BOKU

** Obersriebnig, M; Veigel, S; Gindl-Altmutter, W; Konnerth, J Determination of adhesive energy at the wood cell-wall/UF interface by nanoindentation (NI).

HOLZFORSCHUNG. 2012; 66(6): 781-787. WoS FullText FullText_BOKU

** Rathke, J; Muller, U; Konnerth, J; Sinn, G Strain Measurements within Fibreboard. Part III: Analyzing the Process Zone at the Crack Tip of Medium Density Fiberboards (MDF) Double Cantilever I-Beam Specimens.

MATERIALS. 2012; 5(11): 2190-2204. WoS FullText FullText_BOKU

** Rathke, J; Sinn, G; Konnerth, J; Muller, U Strain Measurements within Fiber Boards. Part I: Inhomogeneous Strain Distribution within Medium Density Fiberboards (MDF) Loaded Perpendicularly to the Plane of the Board.

MATERIALS. 2012; 5(6): 1115-1124. WoS FullText FullText_BOKU

** Sinn, G; Muller, U; Konnerth, J; Rathke, J Strain Measurements within Fibre Boards. Part II: Strain Concentrations at the Crack Tip of MDF Specimens Tested by the Wedge Splitting Method.

MATERIALS. 2012; 5(8): 1495-1507. WoS FullText FullText_BOKU

** Stockel, F; Konnerth, J; Moser, J; Kantner, W; Gindl-Altmutter, W Micromechanical properties of the interphase in pMDI and UF bond lines.

WOOD SCI TECHNOL. 2012; 46(4): 611-620. WoS FullText FullText_BOKU

Habilitationsschrift

Johannes Konnerth (2012): Mechanical characteristics of Wood Adhesive Bonds.

, 194; Universität für Bodenkultur Wien; Habilitation im Fach Wood Material Science

2011

Originalbeitrag in Fachzeitschrift

** Jager, A; Hofstetter, K; Buksnowitz, C; Gindl-Altmutter, W; Konnerth, J Identification of stiffness tensor components of wood cell walls by means of nanoindentation.

COMPOS PART A-APPL S. 2011; 42(12): 2101-2109. WoS FullText FullText_BOKU

** Valla, A; Konnerth, J; Keunecke, D; Niemz, P; Muller, U; Gindl, W Comparison of two optical methods for contactless, full field and highly sensitive in-plane deformation measurements using the example of plywood.

WOOD SCI TECHNOL. 2011; 45(4): 755-765. WoS FullText FullText_BOKU

* Hansmann, C; Konnerth, J; Rosner, S (2011): Digital image analysis of radial shrinkage of fresh spruce (Picea abies L.) wood..

Wood Mater Sci Eng. 2011; 6(1-2):2-6 PubMed PUBMED Central FullText FullText_BOKU

2010

** Buksnowitz, C; Hackspiel, C; Hofstetter, K; Muller, U; Gindl, W; Teischinger, A; Konnerth, J Knots in trees: strain distribution in a naturally optimised structure.

WOOD SCI TECHNOL. 2010; 44(3): 389-398. WoS FullText FullText_BOKU

** Follrich, J; Stockel, F; Konnerth, J Macro- and micromechanical characterization of wood-adhesive bonds exposed to alternating climate conditions.

HOLZFORSCHUNG. 2010; 64(6): 705-711. WoS FullText FullText_BOKU

** Gierlinger, N; Luss, S; König, C; Konnerth, J; Eder, M; Fratzl, P Cellulose microfibril orientation of Picea abies and its variability at the micron-level determined by Raman imaging..

J Exp Bot. 2010; 61(2):587-595 WoS PubMed PUBMED Central FullText FullText_BOKU

** Gindl, W; Emsenhuber, G; Plackner, J; Konnerth, J; Keckes, J; Converse piezoelectric effect in cellulose I revealed by wide-angle X-ray diffraction..

Biomacromolecules. 2010; 11(5):1281-1285 WoS PubMed FullText FullText_BOKU

** Konnerth, J; Eiser, M; Jager, A; Bader, TK; Hofstetter, K; Follrich, J; Ters, T; Hansmann, C; Wimmer, R Macro- and micro-mechanical properties of red oak wood (Quercus rubra L.) treated with hemicellulases.

HOLZFORSCHUNG. 2010; 64(4): 447-453. WoS FullText FullText_BOKU

** Konnerth, J; Stockel, F; Muller, U; Gindl, W Elastic Properties of Adhesive Polymers. III. Adhesive Polymer Films Under Dry and Wet Conditions Characterized by Means of Nanoindentation.

J APPL POLYM SCI. 2010; 118(3): 1331-1334. WoS FullText FullText_BOKU

** Rosner, S; Konnerth, J; Plank, B; Salaberger, D; Hansmann, C Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood.

TREES-STRUCT FUNCT. 2010; 24(5): 931-940. WoS PubMed PUBMED Central FullText FullText_BOKU

** Stockel, F; Konnerth, J; Kantner, W; Moser, J; Gindl, W Mechanical characterisation of adhesives in particle boards by means of nanoindentation.

EUR J WOOD WOOD PROD. 2010; 68(4): 421-426. WoS FullText FullText_BOKU

** Stockel, F; Konnerth, J; Kantner, W; Moser, J; Gindl, W Tensile shear strength of UF- and MUF-bonded veneer related to data of adhesives and cell walls measured by nanoindentation.

HOLZFORSCHUNG. 2010; 64(3): 337-342. WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Christoph Buksnowitz, Ulrich Müller, Wolfgang Gindl, Johannes Konnerth (2010): Strain distributions around knots in Picea abies (L.) boards subjected to tensile load.. [Poster]
[COST Strategic Workshop: Principles and Development of Bio-inspired Materials, Vienna, Austria, APR 13-15, 2010]

In: European Coopration in Sience and Technology, Proceedings of the COST Strategic Workshop: Principles and Development of Bio-inspired Materials

Hansmann C., Konnerth J., Rosner S. (2010): Digital image analysis of radial shrinkage of fresh Norway spruce wood.
[Proceedings of the 11th International IUFRO Wood Drying Conference “Recent Advances in the Field of Wood Drying”, Skellefteå, SWEDEN, JAN 18-22, 2010]

In: Morén T., Antti L., Sehlstedt-Persson M. (eds.) , Proceedings of the 11th Interbational IUFRO Wood Drying Conference “Recent Advances in the Field of Wood Drying”, 376-380

Johannes Konnerth, Ulrich Müller, Wolfgang Gindl, Christoph Buksnowitz (2010): Strain distribution in a spruce branch-stem junction. [Poster]
[COST Strategic Workshop: Principles and Development of Bio-inspired Materials, Vienna, AUSTRIA, APR 13-15, 2010 ]

In: European Coopration in Sience and Technology, Proceedings of the COST Strategic Workshop: Principles and Development of Bio-inspired Materials

Konnerth Johannes, Eiser Martina, Jäger Andreas, Wimmer Rupert (2010): Macro- and micromechanical properties of red oak wood after selective removal of hemicelluloses.. [Poster]
[Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future., Geneva, OKT 11-15, 2010]

In: SWST Society of Wood Science and Technology & UNECE United Nations Economic Commission for Europe - Timber Commitee, Innovative wood products are the future.

Konnerth Johannes Buksnowitz Christoph Gindl-Altmutter Wolfgang Hofstetter Karin Jäger Andreas (2010): Full set of elastic constants of spruce wood cell walls determined by Nanoindentation..
[Society of Wood Science and Technology, 53rd International Convention. Innovative Wood products are the Future., Geneva, OCT 11-15, 2010]

In: SWST Society of Wood Science and Technology & UNECE United Nations Economic Commission for Europe - Timber Commitee, Innivative wood products are the future

Rosner S., Konnerth J., Hansmann C. (2010): Acoustic emissions and radial shrinkage behavior of fresh versus pre-dried Norway spruce sapwood.
[11th Interbational IUFRO Wood Drying Conference “Recent Advances in the Field of Wood Drying”, Skellefteå, SWEDEN, JAN 18-22, 2010]

In: Morén T., Antti L., Sehlstedt-Persson M. (eds.), Proceedings of the 11th International IUFRO Wood Drying Conference “Recent Advances in the Field of Wood Drying”, 87-93

Teischinger, A., Müller, U., Konnerth, J. (2010): Possibilities and limits of wood-fibre based composites.
[8th Global WPC and Natural Fibre Composites Congress and Exihibition, Stuttgart, GERMANY, JUNE 22-23,2010]

In: Bledzki, A., Sperber, V.E., University of Kassel, Eds., 8th Global WPC and Natural Fibre Composites Congress and Exhibition. Scientific Presentations, A1-1 - A1-6; ISBN: 978-83-7518-226-2

Veigel, S. , Müller, U., Konnerth, J., Gindl, W. (2010): Cellulose fibers and nanofibrils for adhesive reinforcement.
[International Conference on Nanotechnology for the Forest Products Industry, Otaniemi, Espoo, 27 September]

In: Tappi, Proceedings of the International Conference on Nanotechnology for the Forest Products Industry, Code 86337. Pages: 1370-1375

2009

Originalbeitrag in Fachzeitschrift

** Konnerth, J; Gierlinger, N; Keckes, J; Gindl, W Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle.

J MATER SCI. 2009; 44(16): 4399-4406. WoS FullText FullText_BOKU

** Konnerth, J; Hahn, G; Gindl, W Feasibility of particle board production using bone glue.

EUR J WOOD WOOD PROD. 2009; 67(2): 243-245. WoS FullText FullText_BOKU

** Rosner, S; Karlsson, B; Konnerth, J; Hansmann, C; Shrinkage processes in standard-size Norway spruce wood specimens with different vulnerability to cavitation..

Tree Physiol. 2009; 29(11):1419-1431 WoS PubMed PUBMED Central FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Konnerth J Gindl W (2009): Nanoindentation for characterisation of wood-adhesive bonds. [Poster]
[International Conference on Wood Adhesives 2009, Lake Tahoe, Nevada, USA, 28.09.2009 - 30.09.2009]

In: Forest Products Society, Wood Adhesives 2009

2008

Originalbeitrag in Fachzeitschrift

** Konnerth, J; Gindl, W Observation of the influence of temperature on the mechanical properties of wood adhesives by nanoindentation.

HOLZFORSCHUNG. 2008; 62(6): 714-717. WoS FullText FullText_BOKU

** Konnerth, J; Harper, D; Lee, SH; Rials, TG; Gindl, W Adhesive penetration of wood cell walls investigated by scanning thermal microscopy (SThM).

HOLZFORSCHUNG. 2008; 62(1): 91-98. WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Rosner S., Karlsson B., Konnerth J., Hansmann C. (2008): Information potential of acoustic emissions on the dehydration behavior of wood.
[28th European Conference on Acoustic Emission Testing, Kraków, September 17-19]

In: Ono, K. (Eds.), Proceedings of the 28th European Conference on Acoustic Emission Testing, European Working Group on Acoustic Emission, 28th European Conference on Acoustic Emission Testing, September 17-19, Kraków, 232-237

2007

Originalbeitrag in Fachzeitschrift

** Konnerth, J., Gindl, W., Müller, U. Elastic properties of adhesive polymers. Part I: polymer films by means of electronic speckle pattern interferometry.

Journal of Applied Polymer Science, 103, 3936-3939 WoS FullText FullText_BOKU

** Konnerth, J; Valla, A; Gindl, W Nanoindentation mapping of a wood-adhesive bond.

APPL PHYS A-MAT SCI PROCESS. 2007; 88(2): 371-375. WoS FullText FullText_BOKU

PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung

Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W (2007): Wood adhesive bondlines by Nanoindentation.
[13th International Conference on Experimental Mechanics, Alexandropoulis, 01.07.2007 - 06.07.2007]

In: E.E. Gdoutos, Eds. , Experimental Analysis of Nano and Engineering Materials and Structures, Proceedings of the 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1-6, 2007, Springer , 13th International Conference on Experimental Mechanics. Experimental Analysis of Nano and Engineering Materials and Structures, July 1-6, Alexandropoulis, 493-494; ISBN: 978-1-4020-6238-4

Konnerth J, Rials TG, Harper D, Lee S-H, Gindl W (2007): Scanning Thermal Microscopy in wood adhesive bondlines.
[9th International Conference on Wood & Biofiber Plastic Composites, Madison, Wisconsin, May 21-23]

In: Forest Products Society, 9th International Conference on Wood & Biofiber Plastic Composites, Proceedings No. 7224, 9th International Conference on Wood & Biofiber Plastic Composites, May 21-23, Madison, Wisconsin, 437-437; ISBN: 1-892529-50-5

Dissertation

Johannes Konnerth (2007): Mechanische Analyse von Holz-Klebstoff Verbindungen.

, 89; Universität für Bodenkultur Wien

2006

Originalbeitrag in Fachzeitschrift

** Gindl, W., Konnerth, J., Schöberl, T. Nanoindentation of regenerated cellulose fibres.

Cellulose, 13, 1-7 WoS FullText FullText_BOKU

** Konnerth, J., Gindl, W. The interphase in wood-adhesive bond lines by nanoindentation.

Holzforschung, 60, 429-433 WoS FullText FullText_BOKU

** Konnerth, J., Gindl, W., Harm, M., Müller, U. Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf- and lap joint testing method.

Holz als Roh- und Werkstoff, 64, 269-271 WoS FullText FullText_BOKU

** Konnerth, J., Jäger, A., Eberhardsteiner, J., Müller, U., Gindl, W. Elastic properties of adhesive polymers. Part II: Polymer films and bond lines by means of nanoindentation.

Journal of Applied Polymer Science, 102, 2, 1234-1239 WoS FullText FullText_BOKU

** Konnerth, J., Valla, A., Gindl, W., Müller, U. Measurement of strain distribution in timber finger joints.

WOOD SCI TECHNOL, 40, 631-636; ISSN 0043-7719 WoS FullText FullText_BOKU

© BOKU Wien Impressum