BOKU - Universität für Bodenkultur Wien - Forschungsinformationssystem
Tschegg Stefanie
>> Wissenstransfer
** = Publikationen gelistet in SCI/SSCI (veröffentlicht im Web of Science)
* = Publikationen in sonstigen peer-reviewten Journalen (ggf. noch nicht im WoS veröffentlicht)
Filter: Originalarbeit, Übersichtsarbeit, Konferenzband Originalarbeit
= Open Access - Publikationen
2022
Originalbeitrag in Fachzeitschrift
** Mayer, H; Holper, B; Zettl, B; Stanzl-Tschegg, SE Slow fatigue crack growth in 2024-T3 and Ti-6Al-4V at low and ultrasonic frequency.
INT J MATER RES. 2022; 94(5): 539-546. WoS FullText FullText_BOKU** Patsch, R; Fromel-Frybort, S; Stanzl-Tschegg, SE The influence of the recycled wood proportion in particle boards to the tool life of milling tools.
WOOD MATER SCI ENG. 2022; 17(3): 163-167. WoS FullText FullText_BOKU** Patsch, R; Fromel-Frybort, S; Stanzl-Tschegg, SE Ash-burn test according to ISO 3340 for the evaluation of the abrasive effect of particleboard on cutting tools.
WOOD MATER SCI ENG. 2022; 17(2): 138-143. WoS FullText FullText_BOKU2021
** Wanhill, RJH; Stanzl-Tschegg, SE Short/small fatigue crack growth, thresholds and environmental effects: a tale of two engineering paradigms.
CORROS REV. 2021; 39(2): 165-175.
WoS
FullText
FullText_BOKU
2020
** Obermuller, B; Frisina, N; Meischel, M; Singer, G; Stanzl-Tschegg, S; Lichtenegger, H; Kolb, D; Klymiuk, I; Till, H; Castellani, C Examination of intestinal ultrastructure, bowel wall apoptosis and tight junctions in the early phase of sepsis.
SCI REP-UK. 2020; 10(1), 11507
WoS
PubMed
FullText
FullText_BOKU
2019
** Stanzl-Tschegg, SE When do small fatigue cracks propagate and when are they arrested?.
CORROS REV. 2019; 37(5): 397-418. WoS FullText FullText_BOKU2017
** Draxler, J; Martinelli, E; Weinberg, AM; Zitek, A; Irrgeher, J; Meischel, M; Stanzl-Tschegg, SE; Mingler, B; Prohaska, T; The potential of isotopically enriched magnesium to study bone implant degradation in vivo..
Acta Biomater. 2017; 51:52-536 WoS PubMed FullText FullText_BOKU** Stanzl-Tschegg, SE Influence of material properties and testing frequency on VHCF and HCF lives of polycrystalline copper.
INT J FATIGUE. 2017; 105: 86-96. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE Fracture mechanical characterization of the initiation and growth of interior fatigue cracks.
FATIGUE FRACT ENG M. 2017; 40(11): 1741-1751. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Stanzl-Tschegg, SE; Perlega, A; Meischel, M; Schönbauer, B
(2017): S-N behaviour of copper at VHCF loading.
[7th International Conference on Very High Cycle Fatigue VHCF7 2017, Dresden, Germany, 03.07.2017 - 05.07.2017]
2016
Originalbeitrag in Fachzeitschrift
** Amerstorfer, F; Fischerauer, SF; Fischer, L; Eichler, J; Draxler, J; Zitek, A; Meischel, M; Martinelli, E; Kraus, T; Hann, S; Stanzl-Tschegg, SE; Uggowitzer, PJ; Löffler, JF; Weinberg, AM; Prohaska, T; Long-term in vivo degradation behavior and near-implant distribution of resorbed elements for magnesium alloys WZ21 and ZX50..
Acta Biomater. 2016; 42:44-50
WoS
PubMed
FullText
FullText_BOKU
** Gruenewald, TA; Ogier, A; Akbarzadeh, J; Meischel, M; Peterlik, H; Stanzl-Tschegg, S; Loffler, JF; Weinberg, AM; Lichtenegger, HC Reaction of bone nanostructure to a biodegrading Magnesium WZ21 implant - A scanning small-angle X-ray scattering time study.
ACTA BIOMATER. 2016; 31: 448-457. WoS PubMed FullText FullText_BOKU** Grunewald, TA; Rennhofer, H; Hesse, B; Burghammer, M; Stanzl-Tschegg, SE; Cotte, M; Loffler, JF; Weinberg, AM; Lichtenegger, HC Magnesium from bioresorbable implants: Distribution and impact on the nano- and mineral structure of bone.
BIOMATERIALS. 2016; 76: 250-260. WoS PubMed FullText FullText_BOKU** Meischel, M; Eichler, J; Martinelli, E; Karr, U; Weigel, J; Schmoller, G; Tschegg, EK; Fischerauer, S; Weinberg, AM; Stanzl-Tschegg, SE Adhesive strength of bone-implant interfaces and in-vivo degradation of PHB composites for load-bearing applications.
J MECH BEHAV BIOMED. 2016; 53: 104-118. WoS PubMed FullText FullText_BOKU** Stanzl-Tschegg, SE; Meischel, M; Arcari, A; Iyyer, N; Apetre, N; Phan, N Combined cycle fatigue of 7075 aluminum alloy - Fracture surface characterization and short crack propagation.
INT J FATIGUE. 2016; 91: 352-362. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE; Meischel, M; Arcari, A; Iyyer, N; Apetre, N; Phan, N Combined cycle fatigue of 7075 aluminum alloy - Fracture surface characterization and short crack propagation (vol 91, pg 352, 2016).
INT J FATIGUE. 2016; 92: 382-382. WoS FullText FullText_BOKU** Turyanskaya, A; Rauwolf, M; Grunewald, TA; Meischel, M; Stanzl-Tschegg, S; Loffler, JF; Wobrauschek, P; Weinberg, AM; Lichtenegger, HC; Streli, C mu XRF Elemental Mapping of Bioresorbable Magnesium-Based Implants in Bone.
MATERIALS. 2016; 9(10): WoS FullText FullText_BOKUTuryanskaya, A; Rauwolf, M; Grünewald, TA; Meischel, M; Stanzl-Tschegg, S; Löffler, JF; Wobrauschek, P; Weinberg, AM; Lichtenegger, HC; Streli, C; (2016): µXRF Elemental Mapping of Bioresorbable Magnesium-Based Implants in Bone..
Materials (Basel). 2016; 9(10):
PubMed
FullText
FullText_BOKU
PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
* Sarrazin-Baudoux, C; Stanzl-Tschegg, SE; Schönbauer, BM; Petit, J
(2016): Ultra slow fatigue crack propagation in metallic alloys.
[XVIII International Colloquium on Mechanical Fatigue of Metals, Gijon, Spain, 05.09.2016 - 07.09.2016]
2015
Originalbeitrag in Fachzeitschrift
** Draxler, J; Zitek, A; Meischel, M; Stranzl-Tschegg, SE; Mingler, B; Martinelli, E; Weinberg, AM; Prohaska, T Regionalized quantitative LA-ICP-MS imaging of the biodegradation of magnesium alloys in bone tissue.
J ANAL ATOM SPECTROM. 2015; 30(12): 2459-2468. WoS FullText FullText_BOKU** Schonbauer, BM; Perlega, A; Karr, UP; Gandy, D; Stanzl-Tschegg, SE Pit-to-crack transition under cyclic loading in 12% Cr steam turbine blade steel.
INT J FATIGUE. 2015; 76: 19-32. WoS FullText FullText_BOKU** Schonbauer, BM; Stanzl-Tschegg, SE; Perlega, A; Salzman, RN; Rieger, NF; Turnbull, A; Zhou, SQ; Lukaszewicz, M; Gandy, D The influence of corrosion pits on the fatigue life of 17-4PH steam turbine blade steel.
ENG FRACT MECH. 2015; 147: 158-175. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Draxler, J; Zitek, A; Meischel, M; Stanzl-Tschegg, S; Mingler, B; Martinelli; E; Weinberg, A; Santner, J; Prohaska, T
(2015): Chemical imaging of the elemental degradation behavior of
biodegradable Mg alloys in mineralized bone tissue by LA-ICP-MS.
[European Winter Conference on Plasma Spectrochemistry 2015, Münster, Germany, 22.02.2015 - 26.02.2015]
Draxler, J; Zitek, A; Meischel, M; Stanzl-Tschegg, SE; Mingler, B; Martinelli, E; Weinberg, A; Prohaska, T
(2015): Regionalized quantitative determination of the spatial distribution of biodegradable Mg alloys in mineralized bone tissue by LA-ICP-MS.
[11th ASAC-JunganalytikerInnenforum 2015, Innsbruck, Austria, 12.06.2015 - 13.06.2015]
Grünewald, T.A.; Rennhofer, H; Meischel, M; Hesse, B; Burghammer, M; Cotte, M; Weinberg, AM; Peterlik, H; Stanzl-Tschegg, SE; Lichtenegger,H
(2015): Magnesium from bio-resorbable implants: distribution and impact on the bone nano- and mineral structure
.
[Joint Annual Meeting of the Austrian Physical Society and the Swiss Physical Society 2015, Vienna, Austria, 01.09.2015 - 04.09.2015]
Schönbauer, BM; Yanase, K; Perlega, A; Stanzl-Tschegg, SE; Endo, M
(2015): Very high cycle fatigue properties of 17-4PH stainless steel.
[ATEM 15, Toyohashi, Japan, 04.10.2015 - 08.10.2015]
2014
Originalbeitrag in Fachzeitschrift
** Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, SE; Przeorski, T; Krug, P Variable amplitude loading of spray-formed hypereutectic aluminium silicon alloy DISPAL (R) S232 in the VHCF regime.
FATIGUE FRACT ENG M. 2014; 37(9): 945-957. WoS FullText FullText_BOKU** Ogawa, T; Stanzl-Tschegg, SE; Schoenbauer, BM A fracture mechanics approach to interior fatigue crack growth in the very high cycle regime.
ENG FRACT MECH. 2014; 115: 241-254. WoS FullText FullText_BOKU** Schonbauer, BM; Stanzl-Tschegg, SE; Perlega, A; Salzman, RN; Rieger, NF; Zhou, SQ; Turnbull, A; Gandy, D Fatigue life estimation of pitted 12% Cr steam turbine blade steel in different environments and at different stress ratios.
INT J FATIGUE. 2014; 65: 33-43. WoS FullText FullText_BOKU** Stanzl-Tschegg, S Very high cycle fatigue measuring techniques.
INT J FATIGUE. 2014; 60: 2-17. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Draxler, J., Zitek, A., Tschegg, S., Mingler, B., Weinberg, A., Prohaska, T.
(2014): Mass spectrometric imaging - Quantification strategies for created bio-images measured by LA-ICP-MS .
[Poster]
[European Geosciences Union EGU General Assembly 2014, Vienna, Austria, 27.04.2014 - 02.05.2014]
Draxler, J., Zitek, A., Tschegg, S., Mingler, B., Weinberg, A., Prohaska, T.
(2014): Mass spectrometric imaging - Quantification strategies for created bio-images measured by LA-ICP-MS ..
[Poster]
[10th ASAC JunganalytikerInnenforum, Tulln an der Donau, Austria, 13.06.2014 - 14.06.2014]
Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, S E; Przeorski, T; Krug, P
(2014): Ultrasonic fatigue of spray formed hypereutectic aluminum silicon alloy and vibration analysis by means of non-linear acoustics.
[6th International Conference on Very High Cycle Fatigue, Chengdu, PR China, 15.10.2014 - 18.10.2014]
Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, S; Przeorski, T; Krug, P
(2014): VHCF of spray formed hypereutectic aluminium silicon alloy.
[Fatigue Design & Material Defects (FDMDII-JIP 2014), Paris, France, 10.06.2014 - 13.06.2014]
Schönbauer, BM; Perlega, A; Karr, UP; Stanzl-Tschegg, SE
(2014): Fatigue assessment of corroded turbine blade steels.
[Fatigue Design & Material Defects (FDMDII-JIP 2014), Paris, France, 10.06.2014 - 13.06.2014]
Schönbauer, BM; Perlega, A; Stanzl-Tschegg, SE
(2014): Influence of stress ratio and environmental surface degradation on the VHCF behaviour of steam turbine blade steels.
[6th International Conference on Very High Cycle Fatigue, Chengdu, PR China, 15.10.2014 - 18.10.2014]
Stanzl-Tschegg, SE; Ogawa, T; Schönbauer, BM
(2014): Fracture mechanical characterization of interior-fatigue-cracks.
[6th International Conference on Very High Cycle Fatigue, Chengdu, PR China, 15.10.2014 - 18.10.2014]
Stanzl-Tschegg, SE; Schönbauer BM
(2014): PSBs and non-propagation of small surface and interior cracks in polycrystalline copper.
[MSMF-7, Brno, Czech Republic, 01.07.2013 - 03.07.2013]
2013
Originalbeitrag in Fachzeitschrift
** Lindtner, RA; Castellani, C; Tangl, S; Zanoni, G; Hausbrandt, P; Tschegg, EK; Stanzl-Tschegg, SE; Weinberg, AM Comparative biomechanical and radiological characterization of osseointegration of a biodegradable magnesium alloy pin and a copolymeric control for osteosynthesis.
J MECH BEHAV BIOMED. 2013; 28: 232-243. WoS FullText FullText_BOKU** Schönbauer, BM; Stanzl-Tschegg, SE; Influence of environment on the fatigue crack growth behaviour of 12% Cr steel..
Ultrasonics. 2013; 53(8):1399-1405 WoS PubMed FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Mingler, B., Draxler, J., Hann, S., Tschegg, S., Weinberg, A. und Prohaska, T.
(2013): Untersuchung der Abbauprodukte neuartiger Implantatmaterialien für die Verwendung in der Unfallchirurgie
.
[Präsentation der Projekte des Life Science Call 2011
, Langenlois, Austria, 14.02.2013]
Salzman, R; Gandy, D; Rieger, N; Schönbauer, B; Tschegg, S; Zhou, S; Turnbull, A
(2013): Corrosion-fatigue prediction methodology for 12% Cr steam turbine blades.
[Power2013, Boston, MA, USA, 29.07.2013 - 01.08.2013]
Schönbauer, BM; Perlega, A; Stanzl-Tschegg, SE
(2013): Pit-to-crack transition and corrosion fatigue of 12% Cr steam turbine blade steel.
[ICF-13, Beijing, PR China, 16.06.2013 - 21.06.2013]
2012
Originalbeitrag in Fachzeitschrift
** Celarek, A; Kraus, T; Tschegg, EK; Fischerauer, SF; Stanzl-Tschegg, S; Uggowitzer, PJ; Weinberg, AM PHB, crystalline and amorphous magnesium alloys: Promising candidates for bioresorbable osteosynthesis implants?.
MAT SCI ENG C-MATER. 2012; 32(6): 1503-1510. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE; Mayer, H; Schuller, R; Przeorski, T; Krug, P Fatigue properties of spray formed hypereutectic aluminium silicon alloy DISPAL (R) S232 at high and very high numbers of cycles.
MAT SCI ENG A-STRUCT. 2012; 538: 327-334. WoS FullText FullText_BOKU** Tschegg, EK; Celarek, A; Fischerauer, SF; Stanzl-Tschegg, S; Weinberg, AM Fracture properties of growth plate cartilage compared to cortical and trabecular bone in ovine femora.
J MECH BEHAV BIOMED. 2012; 14: 119-129. WoS FullText FullText_BOKU** Williams, A; Edge, D; Capwell, T; Tschegg, S A TECHNICAL NOTE ON THE ARMOUR AND EQUIPMENT FOR JOUSTING.
GLADIUS. 2012; 32: 139-184. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Schönbauer, B; Perlega, A; Tschegg, S; Rieger, N; Salzman, R; Gandy, D
(2012): Influence of corrosion pits and environment on the fatigue life of 12% Cr steam turbine blade steel.
[26th ICMFM 2012, Brno, Czech Republic, 24.09.2012 - 26.09.2012]
Schönbauer, B; Stanzl-Tschegg, S; Rieger, N; Salzman, R; Gandy, D
(2012): Influence of corrosion pits on the fatigue limit of 12% Cr steam turbine blade steel.
[ECF-17 2012, Kasan, Republic of Tatarstan, Russian Federation, 26.07.2012 - 31.07.2012]
2011
Originalbeitrag in Fachzeitschrift
** Castellani, C; Lindtner, RA; Hausbrandt, P; Tschegg, E; Stanzl-Tschegg, SE; Zanoni, G; Beck, S; Weinberg, AM Bone-implant interface strength and osseointegration: Biodegradable magnesium alloy versus standard titanium control.
ACTA BIOMATER. 2011; 7(1): 432-440. WoS PubMed FullText FullText_BOKU** Stanzl-Tschegg, SE Wood as a bioinspiring material.
MAT SCI ENG C-MATER. 2011; 31(6): 1174-1183. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE; Keunecke, D; Tschegg, EK; Fracture tolerance of reaction wood (yew and spruce wood in the TR crack propagation system)..
J Mech Behav Biomed Mater. 2011; 4(5):688-698 WoS PubMed FullText FullText_BOKU* Stanzl-Tschegg, S; Eichinger, K; Weidner, A; Tschegg, E; Bernardi, J; Schönbauer, B (2011): Role of Impurities and PSBs on Microcracking of Polycrystalline Copper at Very High Numbers of Cycles.
KEY ENG MATER, 465, 29-34; ISSN 1013-9826 FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
** Tschegg, EK; Lindtner, RA; Doblhoff-Dier, V; Stanzl-Tschegg, SE; Holzlechner, G; Castellani, C; Imwinkelried, T; Weinberg, A Characterization methods of bone-implant-interfaces of bioresorbable and titanium implants by fracture mechanical means.
J MECH BEHAV BIOMED MATER. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS; 4: 766-775. WoS PubMed FullText FullText_BOKU
C.Sarrazin-Baudoux, S.E.Stanzl-Tschegg, H.Mayer, J.Petit
(2011): Ultra slow fatigue crack propagation in TA6V titanium alloy.
[5th International Conference Very High Cycle Fatigue VHCF-5 2011, Berlin, Germany, 28.06.2011 - 30.06.2011]
Salzman, RN; Rieger, NF; Tschegg, S; Schönbauer, B; Turnbull, A.; Zhou, S; Gandy, D
(2011): Corrosion-fatigue in steam turbine blades.
[6. Int Conf on Adv in Mat Tech for Fossil Power Plants, Santa Fe, NM, USA, 31.08.2010 - 03.09.2010]
Schönbauer, B; Stanzl-Tschegg, S; Rieger, N; Salzman, R; Turnbull, A; Zhou, S; Gandy, D
(2011): Crack initiation and propagation in 12% Cr steam turbine blade steel.
[5th International Conference Very High Cycle Fatigue VHCF-5 2011, Berlin, Germany, 28.06.2011 - 30.06.2011]
2010
** Stanzl-Tschegg, SE; Schonbauer, B Mechanisms of strain localization, crack initiation and fracture of polycrystalline copper in the VHCF regime.
INT J FATIGUE. INTERNATIONAL JOURNAL OF FATIGUE; 32: 886-893. WoS FullText FullText_BOKU** Weidner, A; Amberger, D; Pyczak, F; Schonbauer, B; Stanzl-Tschegg, S; Mughrabi, H Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold.
INT J FATIGUE. INTERNATIONAL JOURNAL OF FATIGUE; 32: 872-878. WoS FullText FullText_BOKU
SCHIMPER, C.B., LIEBNER, F., HAIMER, E., WENDLAND, M., MIETHE, P., POTTHAST, A., ROSENAU, T., STANZL-TSCHEGG, S., SINN, G.
(2010): Cellulose aerogels: Highly porous, ultra-lightweight biomaterials.
[Poster]
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]
Stanzl-Tschegg, S; Eichinger, K; Weidner, A; Tschegg, E; Bernardi, J; Schönbauer, B
(2010): Role of impurities and PSBs on microcracking of polycrystalline copper at very high numbers of cycles.
[MSMF-6, Brno, Czech Republic, 28.07.2010 - 30.07.2010]
* Stanzl-Tschegg, S; Schönbauer, B
(2010): Near-threshold fatigue crack propagation and internal cracks in steel.
[Fatigue 2010, Prague, Czech Republic, 28.07.2010 - 30.07.2010]
TSCHEGG, S., POTTHAST, A., ROSENAU, T., LIEBNER, F.
(2010): Wood as a bioinspiring material.
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]
2009
Originalbeitrag in Fachzeitschrift
** Liebner, F; Haimer, E; Potthast, A; Loidl, D; Tschegg, S; Neouze, MA; Wendland, M; Rosenau, T Cellulosic aerogels as ultra-lightweight materials. Part 2: Synthesis and properties.
HOLZFORSCHUNG. HOLZFORSCHUNG; 63: 3-11. WoS FullText FullText_BOKU** Navi, P; Stanzl-Tschegg, S Micromechanics of creep and relaxation of wood. A review COST Action E35 2004-2008: Wood machining - micromechanics and fracture.
HOLZFORSCHUNG. 2009; 63(2): 186-195. WoS FullText FullText_BOKU** Schüller, M; Weninger, P; Tschegg, E; Jamek, M; Redl, H; Stanzl-Tschegg, S Micromotion at the fracture site after tibial nailing with four unreamed small-diameter nails--a biomechanical study using a distal tibia fracture model..
J Trauma. 2009; 66(5):1391-1397 WoS PubMed FullText FullText_BOKU** Stanzl-Tschegg, S; Beikircher, W; Loidl, D Comparison of mechanical properties of thermally modified wood at growth ring and cell wall level by means of instrumented indentation tests.
HOLZFORSCHUNG. 2009; 63(4): 443-448. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE Fracture Properties of Wood and Wood Composites.
ADV ENG MATER. 2009; 11(7): 600-606. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE; Navi, P Fracture behaviour of wood and its composites. A review COST Action E35 2004-2008: Wood machining - micromechanics and fracture.
HOLZFORSCHUNG. 2009; 63(2): 139-149. WoS FullText FullText_BOKU** Weninger, P; Schueller, M; Jamek, M; Stanzl-Tschegg, S; Redl, H; Tschegg, EK Factors influencing interlocking screw failure in unreamed small diameter nails--a biomechanical study using a distal tibia fracture model..
Clin Biomech (Bristol, Avon). 2009; 24(4):379-384 WoS PubMed FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
** Liebner, FW; Potthast, A; Rosenau, T; Haimer, E; Loidl, D; Tschegg, S; Neouze, MA; Maitz, M; Seib, P; Werner, C
Ultra lightweight cellulosic aerogels: Preparation and properties.
[237th National Spring Meeting of the American Chemical Society ACS 2009, Salt Lake City, UT, USA, 22.03.2009 - 26.03.2009]
Liebner, F.; Haimer, E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M.; Carsten, W.; Rosenau, T.
(2009): Ultra-lightweight aerogels from non-derivatized pulps and cellulose derivatives.
.
[15th International Symposium on Wood, Fiber and Pulping Chemistry ISWFPC 2009, Oslo, Norwegen, 15.06.2009 - 18.06.2009]
2008
Originalbeitrag in Fachzeitschrift
** Akiniwa, Y; Stanzl-Tschegg, S; Mayer, H; Wakita, M; Tanaka, K Fatigue strength of spring steel under axial and torsional loading in the very high cycle regime.
INT J FATIGUE. 2008; 30(12): 2057-2063. WoS FullText FullText_BOKU** Eder, M; Stanzl-Tschegg, S; Burgert, I The fracture behaviour of single wood fibres is governed by geometrical constraints: in situ ESEM studies on three fibre types.
WOOD SCI TECHNOL. 2008; 42(8): 679-689. WoS FullText FullText_BOKU** Loidl, D; Tschegg, EK; Stanzl-Tschegg, SE Fracturing of wood under superimposed tension and torsion.
WOOD SCI TECHNOL. 2008; 42(1): 61-74. WoS FullText FullText_BOKU** Salmen, L; Possler, H; Stevanic, JS; Stanzl-Tschegg, SE Analysis of thermally treated wood samples using dynamic FT-IR-spectroscopy.
HOLZFORSCHUNG. 2008; 62(6): 676-678. WoS FullText FullText_BOKU** Sinn, G; Beer, P; Gindl, M; Stanzl-Tschegg, S Wedge splitting experiments on three-layered particleboard and consequences for cutting.
HOLZ ROH WERKST. 2008; 66(2): 135-141. WoS FullText FullText_BOKU** Tschegg, EK; Herndler, S; Weninger, P; Jarnek, M; Stanzi-Tschegg, S; Redl, H Stiffness analysis of tibia-implant system under cyclic loading.
MAT SCI ENG C-BIOMIM SUPRAM S. 2008; 28(8): 1203-1208. WoS FullText FullText_BOKU* Mayer, H; Stojanovic, S; Stanzl-Tschegg, S; Zettl, B; (2008): High cycle fatigue behavior of normalized 0.15%C steel under tension-compression and torsion loading.
KEY ENG MATER, 378-379, 29-38; ISSN 1013-9826PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Liebner, F.; Haimer E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M. A.; Wendland, M.; Rosenau, T.
(2008): Preparation of cellulose aerogels from Lyocell dopes. .
[8th International Symposium Alternative Cellulose 2008 - Manufacturing, Forming, Properties, Rudolstadt, Germany, 03.09.2008 - 04.09.2008]
Liebner, F.; Haimer E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M. A.; Werner, C., Rosenau, T.
(2008): Ultra light-weight aerogels from non-derivatized commercial pulps. .
[10th European Workshop on Lignocellulosics and Pulp EWLP 2008, Stockholm, Sweden, 25.08.2008 - 28.08.2008]
Stanzl-Tschegg,St., and Schönbauer,B.
(2008): Mechanisms of Strain Localization, Crack Initiation and Fracture of Polycrystalline Copper in the VHCF-Regime.
[17th European Conference On Fracture ECF17 2008, Brno, Czech Republic, 02.09.2008 - 05.09.2008]
Weidner,A.,Amberger,D.,Pyczak,F.,Schönbauer,B.,Stanzl-Tschegg,St.,Mughrabi,H.
(2008): Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold.
[17th European Conference On Fracture ECF17 2008, Brno, Czech Republic, 02.09.2008 - 05.09.2008]
2007
Originalbeitrag in Fachzeitschrift
** Keunecke, D; Stanzl-Tschegg, S; Niemz, P Fracture characterisation of yew (Taxus baccata L.) and spruce (Picea abies [L.] Karst.) in the radial-tangential and tangential-radial crack propagation system by a micro wedge splitting test.
HOLZFORSCHUNG. 2007; 61(5): 582-588. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
** Stanzl-Tschegg, S; Mughrabi, H; Schoenbauer, B Life time and cyclic slip of copper in the VHCF regime.
INT J FATIGUE. INTERNATIONAL JOURNAL OF FATIGUE; 29: 2050-2059. WoS FullText FullText_BOKU** Vasic, S; Stanzi-Tschegg, S Experimental and numerical investigation of wood fracture mechanisms at different humidity levels.
HOLZFORSCHUNG. HOLZFORSCHUNG; 61: 367-374. WoS FullText FullText_BOKU
Stanzl-Tschegg, S; Schönbauer, B
(2007): PSB threshold and fatigue limit of polycrystalline copper in the VHCF-regime.
[4th International Conference, Very High Cycle Fatigue VHCF-4 2007, Ann Arbor, MI, USA, 19.12.2007 - 22.12.2007]
2006
Monographie
Tschegg, S. (2006): COST Action E20 Wood Fibre Cell Wall Structure.
Wood Fibre Cell Walls: Methods of Study their Formation, Structure and Properties; ISBN: 91-576-6803-5Originalbeitrag in Fachzeitschrift
** Milojka Gindl Gerhard Sinn Stefanie E. Stanzl-Tschegg The effects of ultraviolet light exposure on the wetting properties of wood.
J ADHES SCI TECHNOL, 20, 817-828; ISSN 0169-4243 WoS FullText FullText_BOKU** Stanzl-Tschegg, S. Microstructure and fracture mechanical response of wood.
INT J FRACTURE, 495-508; ISSN 0376-9429 WoS FullText FullText_BOKU** Stanzl-Tschegg, S. Fatigue crack growth and thresholds at ultrasonic frequencies.
INT J FATIGUE, 28, 1456-1464; ISSN 0142-1123 WoS FullText FullText_BOKU** Wolner Ch., Nauer G., Trummer J., Putz V., Stanzl-Tschegg S.E. Possible reasons for the unexpected bad biocompatibility of metal-on-metal hip implants.
MAT SCI ENG C-BIO S, 26, 34-40; ISSN 0928-4931 WoS FullText FullText_BOKU** Zettl, B., Mayer, H., Ede, C., Stanzl-Tschegg, S. Very high cycle fatigue of normalized carbon steels.
Int. J. Fatigue, 28, 11, 1583-1589 WoS FullText FullText_BOKUPatent
Mugg, P., Cramer, T., Tschegg, S., Mayer, H., Zettl, B. (2006): Werkzeug zur Bearbeitung eines mineralischen Untergrundes mit einem Ultraschall-Werkzeuggerät.
, 20.4.2006; DE 10 2004 031 600 BPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Eder, M., Burgert, I., Stanzl-Tschegg, S
(2006): In-situ ESEM deformation studies of single wood cells.
[5th Plant Biomechanics Conference 2006, Stockholm, Sweden, 28.08.2006 - 01.09.2006]
Loidl, D., Tschegg, E.K., Stanzl-Tschegg, S.E.
(2006): ECF16, Fracturing of wood under torsional loading. Fracture mechanisms and mechanics.
[European Conference of Fracture ECF16 2006, Alexandroupolis, Greece, 03.07.2006 - 07.07.2006]
Stanzl-Tschegg, S.
(2006): Change in the fracture mode and fracture properties of wood with moisture content.
[International Conference on Integrated Approach to Wood Structure, Behaviour and Applications. Joint meeting of ESWM and COST Action E35 2006, Florence, Italy, 14.05.2006 - 17.05.2006]
Skriptum
Stanzl-Tschegg, S. (2006): PHYSIK - Lebensmittel- und Biotechnologie - Übungsbeispiele.
Stanzl-Tschegg, S. (2006): PHYSIK - Kulturtechnik und Wasserwirtschaft - Übungsbeispiele.
Stanzl-Tschegg, S. (2006): PHYSIK - Eine Einführung in die Physik für Studenten der Kulturtechnik und Wasserwirtschaft .
Stanzl-Tschegg, S. (2006): PHYSIK - Eine Einführung in die Physik für Studenten der Lebensmittel- und Biotechnologie .
2005
Originalbeitrag in Fachzeitschrift
** Beer, P; Sinn, G; Gindl, M; Tschegg, S Work of fracture and of chips formation during linear cutting of particle-board.
J MATER PROCESS TECHNOL. 2005; 159(2): 224-228. WoS FullText FullText_BOKU** Burgert, I; Eder, M; Fruhmann, K; Keckes, J; Fratzl, P; Stanzl-Tschegg, S Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 3: Mechanical characterisation.
HOLZFORSCHUNG. 2005; 59(3): 354-357. WoS FullText FullText_BOKU** Burgert, I; Fruhmann, K; Keckes, J; Fratzl, P; Stanzl-Tschegg, S Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 2: Twisting phenomena.
HOLZFORSCHUNG. 2005; 59(2): 247-251. WoS FullText FullText_BOKU** Sinn, G., Mayer, H., Stanzl-Tschegg, S. Surface Properties of Wood and MDF after Ultrasonic-Assisted Cutting.
J. Mater. Sci., 40, 4325-4332 WoS FullText FullText_BOKU** Sinn, G., Zettl, B., Mayer, H., Stanzl-Tschegg, S. Ultrasonic-Assisted Cutting of Wood.
J. Mater. Process. Technol., 170, 42-49 WoS FullText FullText_BOKUKeckes, J; Burgert, I;Müller, M; Hamilton, M; Burghammer, M; Roth, S V; Stanzl-Tschegg, S E; Fratzl, P (2005): In-situ WAXS studies of structural changes in wood foils and in individual wood cells during microtensile tests.
Fibre Diffraction Review, 13, 48-51PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Eder, M., Burgert, I., Fratzl, P., Tschegg, S.
(2005): Stress Relaxation in Wood Fibers and Tissues - Mechanical interaction of cell wall polymers.
[17th International Wood Machining Seminar 2005, Rosenheim, Germany, 26.09.2005 - 28.09.2005]
Sinn, G., Beer, P., Gindl, M., Patsch, R., Kisselbach, A., Standler, F., Stanzl-Tschegg, S.
(2005): Analysis of Cutting Forces in Circumferential flat milling of MDF and Particleboard.
[17th International Wood Machining Seminar 2005, Rosenheim, Germany, 26.09.2005 - 28.09.2005]
Sinn, G. Tschegg, S.
(2005): In plane mode I fracture of particleboards.
[COST Action E35: "Rosenheim Workshop", Rosenheim, Germany, 29.09.2005 - 30.09.2005]
Stanzl-Tschegg, S.
(2005): Investigations on the structure-function relationships in wood.
[International Symposium on Wood Science and Technologie, Yokohama, Japan, 27.11.2005 - 30.11.2005]
Stanzl-Tschegg, S.E., Frühmann, K.,Tschegg, E.K.
(2005): Fracture and Microstructure of Wood.
[ICF 11 2005, Turin, Italy, 20.03.2005 - 25.03.2005]
Stanzl-Tschegg, S.E., Holper, B., Mayer, H.
(2005): Environmental-assisted fatigue cracking of aluminium alloys at different frequencies.
[ICF 11 2005, Turin, Italy, 20.03.2005 - 25.03.2005]
Vasic, S., Tschegg, S.
(2005): Fracture mechanisms and properties of green wood subjected to opening mode I.
[COST Action E35: "Rosenheim Workshop", Rosenheim, Germany, 29.09.2005 - 30.09.2005]
2004
Originalbeitrag in Fachzeitschrift
** Burgert, I; Fruhmann, K; Keckes, J; Fratzl, P; Stanzl-Tschegg, S Structure-function relationships of four compression wood types: micromechanical properties at the tissue and fibre level.
TREES-STRUCT FUNCT. 2004; 18(4): 480-485. WoS FullText FullText_BOKU** Gindl, M; Reiterer, A; Sinn, G; Stanzl-Tschegg, SE Effects of surface ageing on wettability, surface chemistry, and adhesion of wood.
HOLZ ROH WERKST. 2004; 62(4): 273-280. WoS FullText FullText_BOKU** Holper, B., Mayer, H., Vasudevan, A.K., Stanzl-Tschegg, S.E. Near Threshold Fatigue Crack Growth at Positive Load Ratio in Aluminium Alloys at Low and Ultrasonic Frequency: Influences of Strain Rate, Slip Behaviour and Air Humidity.
Int. J. Fatigue, 26, 27-38 WoS FullText FullText_BOKU** Sinn, G., Gindl, M., Reiterer, A., Stanzl-Tschegg, S. Changes in the surface properties of wood due to sanding.
Holzforschung, 58, 246-251 WoS FullText FullText_BOKUKowaluk, G; Dziurka, D; Beer, P; Sinn, G; Tschegg, S (2004): Influence of particleboards production parameters on work of fracture and work of chips formation during cutting.
Electronic Journal of Polish Agricultural Universities, 7, 1, Internet; ISSN 1505-0297 FullTextPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Gindl, M., Cabaj, A., Schmalwieser, A., Hansmann, Ch., Eder, M., Sinn, G., Stanzl-Tschegg, S.E.
(2004): Surface Activation of Wood Using UV Light.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Gindl, M., G. Sinn, U. Müller, S. Stanzl-Tschegg
(2004): Quality parameters of coated particleboards.
[Sustain Life – Secure Survival ll. Socially and Environmentally Responsible Agribusiness 2004, Prague, Czech Republic, 22.09.2004 - 25.09.2004]
Gindl, M., Jeronimidis, G., Atkins, T., Stanzl-Tschegg, S.
(2004): Continuous Hardness Testing for the Determination of Mechanical and Fracture Mechanical Properties of Laminated Particleboards.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Keckes, J., Burgert, I., Lichtenegger, H., Reiterer, A., Stanzl-Tschegg, S., Fratzl, P.
(2004): Microfibril angle in wood: Characterisation using X-Ray scattering and influence on mechanical properties..
[COST Action E20 Wood Fibre Cell Wall Structure, Vienna, Austria, 07.07.2004]
Keckes, J., Burgert, I., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S.V., Stanzl-Tschegg, S.E., Fratzl, P.
(2004): In-situ Synchrotron Studies of Structural Changes in Wood during Microtensile Tests.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Kowaluk, G., Dziurka, D., Beer, P., Sinn, G., Stanzl-Tschegg, S.E.
(2004): Influence of Ammonia Addition on Particleboard Properties.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Müller, U., Gindl, M., Sretenovic, A., Valla, A., Teischinger, A., Stanzl-Tschegg, S.
(2004): Strain distribution in coated particle board during linear cutting measured by means of electronic speckle pattern interferometry.
[Oral Communication]
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Müller, U., Gindl, M., Stretenovic, A., Teischinger, A., Stanzl-Tschegg, S.
(2004): Strain distribution in coated particle board during linear cutting measured by means of electronic speckle pattern interferometry.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Palubicki, B., Beer, P., Sinn, G., Stanzl-Tschegg, S.
(2004): Finite Element Analysis of Tool Indentation into Melamine Coated Particleboard.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Sinn, G., Mayer, H., Zettl, B., Ede, Ch., Beer, P., Stanzl-Tschegg, S.
(2004): Application of Ultrasonic-Assisted Cutting in Wood Machining.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Stanzl-Tschegg, S. E., Vasudevan, A.K.
(2004): Near threshold fatigue crack growth in aluminium alloys at low and ultrasonic frequency.
[International Conference on Fatigue Damage of Structural Materials V, Hyannis, MA, USA, 19.09.2004 - 24.09.2004]
Stanzl-Tschegg, S., Gindl, M., Sinn, G.
(2004): Proceedings of the 2nd International Symposium on Wood Machining. Properties of Wood and Wood Composites Related to Machining.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Stanzl-Tschegg, S.E.
(2004): Fatigue Crack Growth and Thresholds at Ultrasonic Frequencies (plenary lecture).
[3rd International Conference on Very High Cycle Fatigue 2004, Kusatsu, Japan, 16.09.2004 - 19.09.2004]
Zettl, B., Mayer, H., Stanzl-Tschegg, S.E.
(2004): Very high cycle fatigue of normalized steels.
[3rd International Conference on Very High Cycle Fatigue 2004, Kyoto, Japan, 23.09.2004 - 25.09.2004]
2003
Originalbeitrag in Fachzeitschrift
** Burgert, I; Fruhmann, K; Keckes, J; Fratzl, P; Stanzl-Tschegg, SE Microtensile testing of wood fibers combined with video extensometry for efficient strain detection.
HOLZFORSCHUNG. 2003; 57(6): 661-664. WoS** Caton, M.J., Jones, J.W., Mayer, H., Stanzl-Tschegg, S., Allison, J.E. Demonstration of an Endurance Limit in Cast 319 Aluminum.
Metall. Trans., 34A, pp.33-41 WoS** Fruhmann, K; Burgert, I; Stanzl-Tschegg, SE; Tschegg, EK Mode I fracture behaviour on the growth ring scale and cellular level of spruce (Picea abies [L.] Karst.) and beech (Fagus sylvatica L.) loaded in the TR crack propagation system.
HOLZFORSCHUNG. 2003; 57(6): 653-660. WoS** Frühmann, K., Burgert, I., Tschegg, E.K., Stanzl-Tschegg, S.E. Detection of the fracture path under tensile loads through in situ tests in an ESEM chamber..
Holzforschung, 57, 326-332 WoS** Holper, B; Mayer, H; Vasudevan, AK; Stanzl-Tschegg, SE Near threshold fatigue crack growth in aluminium alloys at low and ultrasonic frequency: Influences of specimen thickness, strain rate, slip behaviour and air humidity.
INT J FATIGUE. 2003; 25(5): 397-411. WoS FullText FullText_BOKU** Keckes, J., Burgert, I., Frühmann, K., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, St.V., Stanzl-Tschegg, S.E., Fratzl, P. Cell-wall recovery after irreversible deformation - When mechanical behaviour of wood resembles that of metal.
Nature Materials, 2, 811-816 WoS FullText FullText_BOKU** Mayer, H., Holper, B., Zettl, B., Stanzl-Tschegg, S.E. Slow Fatigue Crack Growth in 2024-T3 and Ti-6Al-4V at Low and Ultrasonic Frequency.
Z. Metallkde., 94, 5, 539-546 WoS** Mayer, H., Papakyriacou, M., Zettl, B., Stanzl-Tschegg, S.E. Influence of porosity on the fatigue limit of die cast magnesium and aluminium alloys.
Int. J. Fatigue, Vol. 25, 3, 245-256 WoS FullText FullText_BOKU* Keckes, J; Burgert, I; Frühmann, K; Müller, M; Kölln, K; Hamilton, M; Burghammer, M; Roth, SV; Stanzl-Tschegg, S; Fratzl, P (2003): Cell-wall recovery after irreversible deformation of wood..
Nat Mater. 2003; 2(12):810-814 PubMed FullText FullText_BOKUPatent
Mayer, H., Tschegg, S. (2003): Schaltungsanordnung, Patentschrift AT 411 193 B, Beginn der Patentdauer: 15.3.2003, Patentinhaber: Mayer Herwig und Tschegg Stefanie, Erfinder: Mayer Herwig und Pfersmann Gerd.
, 15.3.2003; AT 411 193 BPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Beer, P., Sinn, G., Müller, U., Gindl, M., Stanzl-Tschegg, S.
(2003): Influence of Cutter Blunting on Milling of Particle-Board.
[16th international wood machining seminar 2003, Matsue, Japan, 24.08.2003 - 27.08.2003]
Frühmann, K., Burgert, I., Sinn, G., Stanzl-Tschegg, S.
(2003): Fracture mechanical parameters for the TR - crack propagation system in wood.
[2nd International Conference of the ESWM 2003, Stockholm, Sweden, 26.05.2003 - 28.05.2003]
Mayer, H., Stanzl-Tschegg, S.
(2003): Besonderheiten der schwingenden Beanspruchung bei extrem hoher Lastspielzahl.
[Werkstoffprüfung 2003: Herausforderungen durch den industriellen Fortschritt, Bad Neuenhar, Germany, 04.12.2003]
Originalbeitrag in Sammelwerk
Fonte, M., Stanzl-Tschegg, S., Holper, B., Tschegg, E., Vasudevan, A. (2003): The Environment Effect on Fatigue Crack Growth Rates in 7049 Aluminium Alloy at Different Load Ratios.
In: Carpinteri, A., de Freitas, M., Spagnoli, A. (Eds.), Biaxial/Multiaxial Fatigue and Fracture, ESIS, 31, 361-380; Elsevier Science, AmsterdamISBN 0-08-044129-7ISSN 1566-13692002
Originalbeitrag in Fachzeitschrift
** Burgert, I., Keckes, J., Frühmann, K., Fratzl, P., Tschegg, S.E. A Comparison of Two Techniques for Wood Fibre Isolation - Evaluation by Tensile Tests on Single Fibres with Different Microfibril Angle..
Plant Biology, 4, 9-12 WoS** Frühmann, K., Tschegg, E.K., Dai, C., Stanzl-Tschegg, S.E. Fracture behaviour of laminated veneer lumber under Mode I and III loading..
Wood Sc. Techn., 36, 319-334; Springer-Verlag 2002 WoS FullText FullText_BOKU** Fuchs, U., Lipowsky, H., Mayer, H., Papakyriacou, M., Stich, A., Tschegg, S., Zettl, B. Langsames Ermüdungsrisswachstum in Aluminium- und Magnesiumgusslegierungen in Raumluft und in Vakuum..
Mat.-wiss. u. Werkstofftech., 33, 15-23 WoS** Fuchs, U; Lipowsky, H; Mayer, H; Papakyriacou, M; Stich, A; Tschegg, S; Zettl, B Influence of casting defects on the endurance limit of aluminium and magnesium cast alloys.
MATERIALWISS WERKSTOFFTECH. 2002; 33(3): 117-127. WoS** Gindl, M., Tschegg, S. Significance of the Acidity of Wood to the Surface Free Energy Components of Different Wood Species.
Langmuir, 18, 3209-3212 WoS FullText FullText_BOKU** Holper, B; Tschegg, EK; Stanzl-Tschegg, S; Gäbler, C [Possibilities for improving fatigue properties of interlocking screws of solid tibial nails. A mathematical model with practical conclusions].
Unfallchirurg. 2002; 105(2):140-146 WoS PubMed** Papakryiacou, M; Mayer, H; Plenk, H; Stanzl-Tschegg, S Cyclic plastic deformation of tantalum and niobium at very high numbers of cycles.
MATER SCI ENG A-STRUCT MATER. 2002; 325(1-2): 520-524. WoS** Papakyriacou, M., Mayer, H., Fuchs, U., Tschegg, S., Wei, R.P. Influence of atmospheric moisture on slow fatigue crack growth at ultrasonic frequency in aluminium and magnesium alloys..
Fatigue Fract. Engng. Mater. Struct., 25, 8/9, 795-804 WoS** Reiterer, A., Burgert, I., Sinn, G., Tschegg, S. The radial reinforcement of the wood structure and its implication on mechanical and fracture mechanical properties - Acomparison between two tree species..
Journal of Materials Science, 37, 935-940 WoS** Reiterer, A., Sinn, G., Stanzl-Tschegg, S.E. Fracture characteristics of different wood species under mode I loading perpendicular to the grain..
Materials Science and Engineering, A332, 29-36 WoS** Stanzl-Tschegg, S., Mayer, H., Stich, A. Variable amplitude loading in the very high cycle regime..
Fatigue Fract. Engng. Mater. Struct., 25, 8/9, 887-896 WoS** Stanzl-Tschegg, SE Dislocation and surface structures of copper and very-low-carbon steel at low fatigue amplitudes.
Z METALLK. 2002; 93(8): 799-805. WoSPatent
Mayer, H., Stanzl-Tschegg, S. (2002): Vorrichtung an sich drehenden Werkzeugen, PatentschriftAT 410 768 B, Patentinhaber: Mayer Herwig und Tschegg Stefanie, Erfinder: Mayer Herwig.
, 15.12.2002; AT 410 768 BTschegg, E., Stanzl-Tschegg, S. (2002): Keilspaltbruchprüfeinrichtung für kombinierte Beanspruchung.
Österr. Patentamt, Pat. Nr. 409.038, 7.2.2002PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
** Fruhmann, K; Reiterer, A; Tschegg, EK; Stanzl-Tschegg, SS Fracture characteristics of wood under mode I, mode II, and mode III loading.
PHIL MAG A. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES; 82: 3289-3298. WoS FullText FullText_BOKU
Beer, P., Ede, Ch., Gindl, M., Stanzl-Tschegg, S.E.
(2002): Cutting tests of laminated particle board regarding work of fracture and chips plastic deformation.
[ICWSE Conference 2002 - Wood Science and Engineering in the Millenium, Brasov, Romania, 20.11.2002 - 22.11.2002]
Fonte, M., Romeiro, F., De Freitas, M., Stanzl-Tschegg, S., Tschegg, E., Vasudevan, A.
(2002): The Environment Effect on Fatigue Crack Growth of 7049 Aluminium Alloy at Negative Stress Ratios.
[8th PORTUGUESE CONFERENCE ON FRACTURA, Vila Real, Portugal, 20.02.2002 - 22.02.2002]
Gindl, M., Beer, P., Patsch, R., Ede, Ch., Stanzl-Tschegg, S.E.
(2002): Cutting performance of panels regarding tools / material interaction.
[III. Chip and Chipless Woodworking Process, Zvolen, Slovak Republic, 16.10.2002 - 19.10.2002]
Mayer, H., Stanzl-Tschegg S. (2002): Influence of loading frequency on the very high cycle fatigue properties of fcc alloys.
In: Blom, A.F. (Ed.): Proc. of 8th Int. Fatigue Congress, Vol.V, 2947-2954; Cradley Heath, UK, EMASOriginalbeitrag in Sammelwerk
Fonte, M., Holper, B., Stanzl-Tschegg, S.E., Tschegg, E., Vasudevan, A. (2002): The Environment Effect on Fatigue Crack Growth Rates in 7049 Aluminium Alloy at Different Load Ratios.
In: Carpinteri, A., de Freitas, M., Spagnoli, A. (Eds.), Biaxial/Multiaxial and Fracture. ESIS STP., 343-364; Elsevier, AmsterdamHinterstoisser, B., Burgert, I., Fackler, K., Galhaup, C., Haltrich, D., Kuncinger, T., Messner, K., Schwanninger, M., Srebotnik, E., Steinwender, M., Stefke, B., Tschegg, S. (2002): Wood Modification for higher Quality Composites.
In: Institut für Holzforschung (IHF) und der Verband Holzwirte Österreichs - VHÖ, Teischinger, A., Stingl, R., Proceedings of the international Symposium on Wood Based Materials - Wood Composites and Chemistry; Special Issue of Lignovisionen 4, 5-16; Eigenverlag - Universität für Bodenkultur, Wien; ISBN ISSN 1681 - 2808 FullTextTschegg, S. (2002): Holz - ein optimierter Werkstoff.
LIGNOVISIONEN. Schriftenreihe Band 2. Holz: Rohstoff - Werkstoff - Energiequelle der Zukunft. Herausgeber: Institut für Holzforschung (ihf) und der Verband Holzwirte Österreichs - VHÖ beide an der Universität für Bodenkultur Wien. Februar 2002, ISSN 1681 - 2808Wimmer, R., Hinterstoisser, B., Stanzl-Tschegg, S., Grabner, M., Wallner, G., Halbwachs, G., Schär, E., Wagenführ, R. (2002): Anatomical, Chemical and Mechanical Trends in Norway Spruce (Picea abies (L.) Karst.) Tree-rings as Indicators of Environmental Stresses, in Particular SO2-pollution..
In: Lomsky, B., Materna, J., Pfanz, H. (Eds.); SO2-Pollution and Forests Decline in the Ore Mountains, 239-260; VULHM, Jiloviste-StrnadyISBN 80-86461-24-6Zettl, B., Mayer, H., Stanzl-Tschegg, S.E. (2002): Fatigue Properties and Endurance Limit of Aluminium Foams.
In: Degischer, H.-P., Kriszt, B. (Eds.): , Handbook of Cellular Metals, 203-210; Wiley-VCH, Weinheim, GermanyBuch- oder Aufsatzrezension
Stanzl-Tschegg, S. (2002): Review of the manuscript No 3375: "Morphology of Step-Wise S-N Curves depending on Work-Hardened Layer and Humidity in a High Strength Steel" by M Nakajima, K Tokaji, H Itoga, H-N Ko.
Journal: Fatigue & Fracture of Engineering Materials & Structures2001
Monographie
Tschegg, E., Jamek, M., Tschegg, S. (2001): Bruch- und Selbstheilungsverhalten von Asphalt und Asphaltverbunden - Ausmaß und Nutzen..
Bundesministerium für Verkehr, Innovation und Technologie - Strassenforschung. Heft 516Originalbeitrag in Fachzeitschrift
** Färber, J., Lichtenegger, H.C., Reiterer, A., Stanzl-Tschegg, S., Fratzl, P. Cellulose microfibril angles in a spruce branch and mechanical implications..
J. Mat. Sci., 36, 5087-5092 WoS** Fonte, M.A., Stanzl-Tschegg, S.E., Holper, B., Tschegg, E.K., Vasudevan, A.K. The microstructure and environment influence on fatigue crack growth in 7049 aluminium alloy at different load ratios.
International Journal of Fatigue, 23, 311-317 WoS** Gaebler, C; Speitling, A; Milne, EL; Stanzl-Tschegg, S; Vécsei, V; Latta, LL A new modular testing system for biomechanical evaluation of tibial intramedullary fixation devices..
Injury. 2001; 32(9):708-712 WoS PubMed** Gaebler, C; Stanzl-Tschegg, S; Laube, W; Vécsei, V The fatigue strength of small diameter tibial nails..
Injury. 2001; 32(5):401-405 WoS PubMed** Gindl, M., Sinn, G., Gindl, W., Reiterer, A., Stanzl-Tschegg, S. A Comparison of Different Methods to Calculate the Surface Free Energy of Wood Using Contact Angle Measurements..
Colloids and Surfaces A, 181/1-3, 279-287 WoS** Gindl, M., Sinn, G., Reiterer, A., Stanzl-Tschegg, S. Wood Surface Energy and Time Dependence of Wettability: A Comparison of Different Wood Surfaces Using an Acid-Base Approach..
Holzforschung, 55, 4, 433¿440 WoS FullText** Lichtenegger, H., C., Reiterer, A., Stanzl-Tschegg, S., E., Fratzl, P. Comment about "The measurement of the micro-fibril angle in soft-wood" by K. M. Entwistle and N. J. Terrill.
Journal of Materials Science, Letters 20, 2245-2247 WoS** Mayer, H., Papakyriacou, M., Pippan, R., Stanzl-Tschegg, S. Influence of Loading Frequency on the High Cycle Fatigue Properties of AlZnMgCu1.5 Aluminium Alloy..
Mat. Sci. Eng., A, 314, 51-57 WoS** Papakyriacou, M., Mayer, H., Pypen, C., Plenk Jr, H., Stanzl-Tschegg, S. Influence of loading frequency on high - cycle fatigue properties of b.c.c. and h.c.p. metals..
Mat. Sci. Eng., A, 308, 143-152 WoS** Reiterer, A., Lichtenegger, H., Fratzl, P., Stanzl-Tschegg, S. Deformation and Energy Adsorption of Wood Cell Walls with Different Nanostructure Under Tensile Loading..
Journal of Materials Science, 36, 19, 4681-4686 WoS** Reiterer, A., Stanzl-Tschegg, S.E. Compressive behaviour of softwood under uniaxial loading at different orientations to the grain..
Mechanics of Materials, 33, 12, 705-715 WoS** Sinn, G., Reiterer, A., Stanzl-Tschegg S.E. Surface Investigations of Different Wood Species Using Photoelectron-Spectroscopy (XPS)..
Journal of Materials Science, 36, 19, 4673-4680 WoS** Sinn, G., Reiterer, A., Stanzl-Tschegg, S.E., Tschegg E.K. Determination of Strains of Thin Wood Samples Using Videoextensometry..
Holz- als Roh- und Werkstoff, 59, 3,177-182 WoS FullText FullText_BOKU** Tschegg, E.K., Frühmann, K., Stanzl-Tschegg, S.E. Damage and Fracture Mechanism during Mode I and III Loading of Wood..
Holzforschung, 55 WoS** Tschegg, E.K., Reiterer, A., Pleschberber, T., Stanzl-Tschegg, S.E. Mixed mode fracture energy of sprucewood..
Journal of materials science, 36, 3531¿3537 WoS FullText** Tschegg, S., Mayer, H. Fatigue and fatigue crack growth of aluminium alloys at very high numbers of cycles..
Int. J. Fatigue, 23, 231-237 WoS** Zettl, B., Mayer, H., Stanzl-Tschegg, S. Fatigue Properties of Al-1Mg-0.6Si Foam at Low and Ultrasonic Frequencies..
Int. J. Fatigue, 23, 565-573 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Frühmann, K., Tschegg, E.K., Stanzl-Tschegg, S.E. (2001): A new Experimental Technique for Determining the Fracture Energy of Wood under Mode II Loading Conditions..
International Conf. of Fracture, 2.-6.12.2001, Honolulu, HawaiiMayer, H., Stanzl-Tschegg, S. (2001): Environmental Influences at Very High Frequency..
In: Stanzl-Tschegg, S., Mayer, H. (Eds.): Proc. of Int. Conf. on Fatigue in the Very High Cycle Regime, 267-274. Inst. of Met. and Physics, Univ. of Agricult. Sci., Vienna, Austria, ISBN 3-9501315-1-5Papakyriacou, M., Mayer, H., Stanzl-Tschegg, S. (2001): Influence of Loading Frequency on the Fatigue Properties in the Very High Cycle Regime..
In: Stanzl-Tschegg, S., Mayer, H. (Eds.): Proc. of Int. Conf. on Fatigue in the Very High Cycle Regime, 73-80. Inst. of Met. and Physics, Univ. of Agricult. Sci., Vienna, Austria, ISBN 3-9501315-1-5Reiterer, A., Lichteneger, H., Färber, J., Stanzl-Tschegg, S.E., Fratzl, P. (2001): Variability of Microfibril Angles in Softwood, Hardwood and Reaction Wood..
First International Conference of the European Society for Wood Mechanics, 19th-2st April 2001, EPFL Lausanne, CHSinn, G., Reiterer, A., Stanzl-Tschegg, S. (2001): The influence of Moisture Content on the Nonlinear Fracture Properties of Spruce..
First International Conference of the European Society for Wood Mechanics, 19th-2st April 2001, EPFL Lausanne, CHStanzl-Tschegg, S., Mayer, H. (2001): Variable Amplitude Loading in the Very High Cycle Regime..
In: Stanzl-Tschegg, S., Mayer, H. (Eds.): Proc. of Int. Conf. on Fatigue in the Very High Cycle Regime, 371-378. Inst. of Met. and Physics, Univ. of Agricult. Sci., Vienna, Austria, ISBN 3-9501315-1-5Tschegg, S. (2001): Holz ein optimierter Werkstoff..
In: Univ. f. Bodenkultur Wien, Tschechische Agraruniversität Prag, Univ. Westungarn (Hrsg.): Tagungsband, Boku-Kongress "Leben und Überleben - Konzepte für die Zukunft", Abstracts/Ergänzunge, 79a; 19-21 November 2001, Hofburg, WienZettl, B., Mayer, H., Stanzl-Tschegg, S. (2001): Fatigue Properties of Aluminium Foam at Very High Numbers of Cycles..
In: Stanzl-Tschegg, S., Mayer, H. (Eds.): Proc. of Int. Conf. on Fatigue in the Very High Cycle Regime, 237-244. Inst. of Met. and Physics, Univ. of Agricult. Sci., Vienna, Austria, ISBN 3-9501315-1-5Zettl, B., Mayer, H., Stanzl-Tschegg, S. (2001): Fracture Energy and Fracture Toughness of Alulight foams..
In: Banhart, J., Ashby, M.F., Fleck, N.A. (Eds.): Proc. of the 2nd Int. Conf. on Cellular Metals and Metal foaming Technology - MetFoam 2001, Verlag Metall Innovation Technik MIT, BremenHerausgeberschaft
Stanzl-Tschegg, S., Mayer, H. (Eds.) (2001): Proc. of Int. Conf. on Fatigue in the Very High Cycle Regime..
Inst. of Met. and Physics, Univ. of Agricultural Sciences, Vienna, Austria. ISBN 3-9501315-1-5Buch- oder Aufsatzrezension
Tschegg, S. (2001): Predicting the interfaces between fatigue crack growth regimes in 7150-T651 Aluminium alloy using the fatigue damage map..
Auftraggeber: Materials Science & Engineering - Professor E. WernerTschegg, S. (2001): Characterisation of internal defects of steels used in fossil power plants..
Auftraggeber: Materials Science & Engineering - Prof. Gernot Kostorz2000
Originalbeitrag in Fachzeitschrift
** Papakyriacou, M., Mayer, H., Pypen, C., Plenk Jr., H., Stanzl-Tschegg, S. Effect of Surface Treatments on High Cycle Corrosion Fatigue of Metallic Implant Materials..
Int. J. Fatigue, 22/10, 837-886 WoS** Reiterer, A., Stanzl-Tschegg, S.E., Tschegg, E.K. Mode I Fracture and Acoustic Emission of Softwood and Hardwood..
Wood Sci. Techn., 34, 5, 417-430 WoS FullText FullText_BOKU** Schachner, H., Reiterer, A., Stanzl-Tschegg, S.E. Orthotropic fracture toughness of wood..
J. Materials Science Letters, 19, 20, 1783-1785 WoS** Zettl, B., Mayer, H., Stanzl-Tschegg, S.E., Degischer, H.P. Fatigue Properties of Aluminium Foams at High Numbers of Cycles..
Mat. Sci. Eng. A, 292, 1-7 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Gindl, M., Reiterer, A., Lichtenegger, H., Gindl, W., Stanzl-Tschegg, S.E. (2000): Influence of Anatomical Variability at the Tree Ring Level on Mechanical Properties of Larch..
In Aicher, S. (Ed.): Proceedings. International Conference Wood and Wood Fiber Composites, 105-114, University of Stuttgart. ISBN 3-89301-082-3Gindl, M., Sinn, G., Gierlinger, B., Gindl, W., Reiterer, A., Stanzl-Tschegg, S.E. (2000): The contact angle technique; a valuable tool for the assessment of the coating properties of wood..
In: Stanzl-Tschegg, S.E., Reiterer, A. (Eds.): Proc., 1st Int. Symp. on Wood Machining - Properties of Wood and Wood Composites related to Wood Machining. 195-202, CD Laboratory for Fundamentals of Wood Machining, Vienna, Austria. ISBN 3-9501315-0-7Lichtenegger, H., Reiterer, A., Stanzl-Tschegg, S.E., Paris, O., Müller, M., Fratzl, P. (2000): Cellulose orientation in the wood cell wall..
In: Stanzl-Tschegg, S.E., Reiterer, A. (Eds.): Proc. 1st Int. Symp. on Wood Machining - Properties of Wood and Wood Composites related to Wood Machining. 31 - 38, CD Laboratory for Fundamentals of Wood Machining, Vienna, Austria. ISBN 3-9501315-0-7Lichtenegger, H., Reiterer, A., Tschegg, S.E., Fratzl, P. (2000): Microfibril Angle in the Wood Cell Wall: Mechanical Optimization through Structural Variation?.
In: COST E20 (Ed.): Proceedings. COST Action E20 Wood Fibre Cell Wall Structure. Workshop Fibre Wall and Microfibril Angle, 1-4, University of Athens, GreeceReiterer, A., Sinn, G., Stanzl-Tschegg, S.E. (2000): Mode I Fracture of Softwoods and Hardwoods in the Crack Propagation Systems RL and TL..
In Aicher, S. (Ed.): Proceedings. International Conference Wood and Wood Fiber Composites, 123-134, University of Stuttgart. ISBN 3-89301-082-3Sinn, G., Reiterer, A., Gindl, M., Stanzl-Tschegg, S.E. (2000): Surface investigation of wood using SEM, EDX and XPS..
In: Stanzl-Tschegg, S.E., Reiterer, A. (Eds.): Proc. 1st Int. Symp. on Wood Machining - Properties of Wood and Wood Composites related to Wood Machining. 211-219, CD Laboratory for Fundamentals of Wood Machining, Vienna, Austria. ISBN 3-9501315-0-7Tschegg, S.E. (2000): Wood properties and machining - investigations in the CD-Laboratory for fundamentals of wood machining..
In: Stanzl-Tschegg, S.E., Reiterer, A. (Eds.): Proc., 1st Int. Symp. on Wood Machining - Properties of Wood and Wood Composites related to Wood Machining. CD Laboratory for Fundamentals of Wood Machining, Vienna, Austria. ISBN 3-9501315-0-7Tschegg, S.E., Rieder, A., da Fonte, M., Tschegg, E.E. (2000): The microstructure and Environmental Influence on Fatigue Crack Growth in 7075 Alloy at Different Load Ratios..
Int. Conf. on Fatigue of Structural Materials III, Sept. 16-22, Hyannis, USAZettl, B., Stanzl-Tschegg, S. (2000): Ermüdungschäden in Aluminiumschaum..
Proceeding of Symp. Metallschäume 2000, Deutsche Gesellschaft für Materialunde, Feb 2000, Wien. Materialwissenschaften und Werkstofftechnik, Sonderband, Vol 31, 6, 484-487Originalbeitrag in Sammelwerk
Lichtenegger, H., Reiterer, A., Tschegg, S.E., Müller, M., Riekel, Ch., Paris, O., Fratzl, P. (2000): Microfibril angle determined by X-ray scattering and the correlation with the mechanical properties of wood..
In: Spatz, H.C., Speck, T. (Eds.): Plant Biomechanics 2000. 436-442, Thieme Verlag, Stuttgart, New YorkHerausgeberschaft
Tschegg, S., Reiterer, A. (2000): Proceedings of the International Symposium on Wood Machining - Properties of Wood and Wood Composites related to Wood Machining.
S.E. Stanzl-Tschegg, A. Reiterer (Eds.), Christian Doppler Laboratory for Fundamtenals of Wood Machining, Vienna, Austria. ISBN 3-9501315-0-71999
Originalbeitrag in Fachzeitschrift
** Ehart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. Mode III fracture energy of wood composits in comparison to solid wood..
Wood Sci. Techn, 33, 391-405 WoS** Gäbler, C; Tschegg, EK; Greitbauer, M; Stanzl-Tschegg, S; Wozasek, GE; Laube, W; Vécsei, V [Fatigue stability of locking screws for unreamed tibial intramedullary nailing].
Unfallchirurg. 1999; 102(1):29-34 WoS PubMed FullText FullText_BOKU** Gaebler, C; Stanzl-Tschegg, S; Heinze, G; Holper, B; Milne, T; Berger, G; Vécsei, V Fatigue strength of locking screws and prototypes used in small-diameter tibial nails: a biomechanical study..
J Trauma. 1999; 47(2):379-384 WoS PubMed FullText FullText_BOKU** Gaebler, C; Stanzl-Tschegg, S; Tschegg, EK; Kukla, C; Menth-Chiari, WA; Wozasek, GE; Heinz, T Implant failure of the gamma nail..
Injury. 1999; 30(2):91-99 (- Case Report) WoS PubMed FullText FullText_BOKU** Lichtenegger, H; Reiterer, A; Stanzl-Tschegg, SE; Fratzl, P Variation of cellulose microfibril angles in softwoods and hardwoods-a possible strategy of mechanical optimization..
J Struct Biol. 1999; 128(3):257-269 WoS PubMed FullText FullText_BOKU** Mayer, H. R., Lipowsky, H., Papakyriacou, M., Rösch, R., Stich, A., Stanzl-Tschegg, S. E. Application of ultrasound for fatigue testing of lightweight alloys..
Fatigue Fract. Eng. Mater. Struct., 22, 591-599 WoS** Mayer, H. R., Papakyriacou, M., Stanzl-Tschegg, S. E., Tschegg, E. K., Zettl, B., Lipowsky, H., Rösch, R., Stich, A. Korrosionsermüdung verschiedener Aluminium- und Magnesium-Gußlegierungen..
Materials and Corrosion, 50, 81-89 WoS** Reiterer, A., Lichtenegger, H., Tschegg, S., Fratzl, P. Experimental evidence for a mechanical function of the cellulose microfibril angle in wood cell walls..
Philosophical Magazine A, 79, 9, 2173-2184 WoS** Stanzl-Tchegg, SE Fracture mechanisms and fracture mechanics at ultrasonic frequencies.
FATIGUE FRACT ENG MATER STRUC. 1999; 22(7): 567-579. WoS** Stanzl-Tschegg, S. E., Filion, L., Tschegg, E. K., Reiterer, A. Strength properties of S02 polluted spruce wood..
Holz als Roh- und Werkstoff, 57, 121-128 WoS** Stanzl-Tschegg, S.E., Tschegg, E.K., Plasser, O., Vasudevan, A.K. Influence of Microstructure and Load Ratio on Fatigue Threshold Behaviour in 7075 Aluminium Alloy..
Int. J. Fatigue, 21, 255 - 262 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Gaebler, Stanzl-Tschegg, Holper, Greitbauer, Tschegg, Vecsei (1999): Unaufgebohrte Tibianaegel: Biomechanische Untersuchung von Verriegelungsschrauben und Prototypen..
Jahreskongress der Osteosynthese International, Giessen/FrankfurtGindl, M., Reiterer, A., Stanzl-Tschegg, S. E., Gindl, W. (1999): Radial variability of wood properties: the example of a 408 yr. old Larch tree..
Proc. COST Action E10 2nd Workshop Wood Properties for Industrial Use, 13.-15. June 1999, Lisboa, PortugalMayer, H.R., Lipowsky, H., Papakyriacou, M., Rösch, R., Stich, A., Zettl, B., Stanzl-Tschegg, S.E. (1999): Fatigue properties of high pressure die cast magnesium alloys at high numbers of cycles..
In: Wu, X., Wang, Z. (Eds.): Proc. of 7th Int. Fatigue Conf., Vol. III, 2059-2064, Cradley Heath, UKPapakyriacou, M., Mayer, H. R., Stanzl-Tschegg, S. E. (1999): Corrosion fatigue of biomaterials..
Proc. of Fatigue '99, Bejing, ChinaPapakyriacou, M., Mayer, H. R., Stanzl-Tschegg, S. E. (1999): Fatigue and corrosion fatigue properties of metallic biomaterials..
Wu, X., Wang, Z. (eds.): Proc. of 7th Int. Fatigue Conf., Vol. III, 1789-1794, Cradley Heath, UK, EMASStanzl-Tschegg, S. E., Tschegg, E. K., Plasser, O., Vasudevan, A. K. (1999): Influence of microstructure, load ratio and environment on fatigue tresholds of structural alluminum alloys..
Proc. of Fatigue '99, Bejing, ChinaTschegg, E. K., Frühmann, K., Stanzl-Tschegg, S. E. (1999): Damage and fracture mechanism during mode I and III loading of wood..
Proc. COST 99, Bordeaux, FranceTschegg, E. K., Stanzl-Tschegg, S. E. (1999): Fracture tests on core specimens from bituminous pavements..
Eurobitume Workshop 99, European Parlament, Kirchberg Plateau, LuxembourgZettl, B., Stanzl-Tschegg, S. (1999): Fatigue of Al Foams at ultrasonic frequencies..
In: Banhart, J., Ashby, M.F., Fleck, N.A. (Eds.): Proceedings of Metal Foams and Porous Metal Structures, 373 -378. MetFoam ´99, Bremen, Germany, Verlag Metall Innovation Technik MIT, 1999, BremenOriginalbeitrag in Sammelwerk
Papakyriacou, M., Mayer, H. R., Tschegg, S. E. (1999): Corrosion fatigue of dental biomaterials..
In: La Berge, M., Agrawal, C. M. (eds.): Society for biomaterials. p. 165, Society for Biomaterials, USA1998
Originalbeitrag in Fachzeitschrift
** Ehart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. Fracture of PARALLAM in comparison to solid wood and particleboard..
Wood Sci. Techn., 32, 43-55 WoS** Ehart, R.J.A., Stanzl-Tschegg, S.E., Tschegg, E.K. Crack Face Interaction and Mixed Mode Fracture of Wood and Wood Composites during Mode III Loading..
Eng. Fract. Mech., 61, 253-278 WoS** Reiterer, A., Jakob, H. F., Stanzl-Tschegg, S. E., Fratzl, P. Spiral angle of elementary cellulose fibrils in cell walls of Picea abies determined by small-angle X-ray scattering..
Wood Sci. Techn., 32, 335-345 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Beste, A., Lipowsky, H., Mayer, H. R., Tschegg, S. E., Lotte, K.-L., Pannkoke, K. (1998): Mechanical properties of magnesium low-pressure permanent mould casting AZ91 under various conditions..
In: Mordike, B. L., Kainer, K. U. (eds.): Proc.of Int. Conf. and Exhib. of Magnesium Alloys and their Application. Werkstoff-Informationsgesellschaft, 253-258, FrankfurtEhart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. (1998): Characterization of crack propagation in wood panel products under shear loading..
2nd European Panel Products Symp., University of Wales, Gwynedd, EnglandMayer, H. R., Tschegg, S. E., Rösch, R., Lipowsky, H., Stich, A. (1998): Korrosionsermüdung verschiedener Aluminium- und Magnesiumlegierungen..
Proc. of DVM-Tag 1998 Bauteil '98: Konstruktiver Korrosionsschutz, Berlin, DVM, 219-236Mayer, H., Rösch, R., Lipowsky, H., Zettl, B., Papakyriacou, M., Stanzl-Tschegg, S. E. (1998): Fatigue properties of high pressure die cast magnesium alloys..
Proc. 1st Israeli Conf. on Magnesium Science and Technology, Jerusalem, IsraelPapakyriacou, M., Stanzl-Tschegg, S.E., Schijve, J., Mayer, H. (1998): Ultrasonic testing of materials for aeroplane applications..
In: Proc. of Euromech 382, Fatigue Life in the Gigacycle regime, Paris, France, June 29 - July 1Sinn, G., Reiterer, A., Stanzl-Tschegg, S. E. (1998): Elastic constants of wood determined by optical strain measurements..
Proc. 4th Seminar on Energy and Environment, Gödöllö, HungaryStanzl-Tschegg, S. E., Ehart, R. J. A., Tschegg, E. K. (1998): Fracture properties of the new compound PARALLAM¨PSL..
COST E8 Int. Workshop on Mechanical Performance of Non-standard Wood, Florenz, ItalyZettl, B.E., Stanzl-Tschegg, S.E., Gradinger, R., Degischer, H.P. (1998): High Cycle Fatigue Properties of Aluminium Foams..
In: Schwarz, D.S., Shih, D.S., Evans, A.G., Wadley, H.N.G. (Eds.): Porous and Cellular Material for Structural Application. Proceedings of the Material Research Society . Volume 521, 97-102. Spring meeting 1998, San FranciscoOriginalbeitrag in Sammelwerk
Ingruber, M., Tschegg, E. K., Stanzl-Tschegg, S. E. (1998): Bruchverhalten von bituminösen Schichtverbunden..
In: Roßberg, K. (Hrsg.): Prüfung und Bewertung von Konstruktionsschichten im Straßenbau. 119-135, TU Dresden, DELichtenegger, H., Reiterer, A., Tschegg, S. E., Fratzl, P. (1998): Determination of spiral angles of elementary fibrils in the wood cell wall: Comparison of small-angle X-ray scattering and wide-angle X-ray diffraction..
In: Butterfield, B. (ed.): Microfibril angle in wood. 140-156, University of Canterbury, Christchurch, New Zealand1997
Originalbeitrag in Fachzeitschrift
** Papakyriacou, M., Schijve, J., Stanzl-Tschegg, S. E. Fatigue crack growth of fiber-metal laminate glare and metal laminate 7475 with different blunt notches..
Fatigue Fract. Eng. Mater. Struct., 20, 11, 1573-1584 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Rödhammer, M., Reiterer, A., Stanzl-Tschegg, S. E. (1997): Research on interface-bonding and biocompatibility of tooth-implants..
Proc. 3rd Seminar on Energy and Environment, 10.-12. Nov. 1997, Gödöllö, HungaryStanzl-Tschegg, S. E. (1997): High-cycle fatigue crack growth in the Paris- and Threshold regime at ultrasonic frequencies..
Invited Lecture at Int. Symp. on Fatigue of Materials (Prof. P. Paris Symp.), TMS-ASM Fall Meeting Indianapolis, Indiana, USAStanzl-Tschegg, S. E., Ehart, R. J. A., Tschegg, E. K. (1997): Fracture behaviour of glued wood laminate compounds..
ICF9, 9th Internat. Conf. on Fracture, Sydney, AustraliaTschegg, E. K., Ehart, R. J. A., Stanzl-Tschegg, S. E. (1997): Eine effiziente Methode zur Bestimmung der Brucheigenschaften von bituminös gebundenen Baustoffen..
Konferenzbericht 'Asphaltstrassen 97', Budweis, Tschech. RepTschegg, E. K., Stanzl-Tschegg, S. E. (1997): Fracture mechanical characterization of asphalt aggregate mixtures..
ICF9, 9th Internat. Conf. on Fracture, Sydney, AustraliaOriginalbeitrag in Sammelwerk
Ehart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. (1997): Crack face interaction and mixed mode fracture of wood and wood composites during mode IIIlLoading..
In: Macha, E., Mroz, Z. (eds.): Biaxial/multiaxial fatigue and fracture. Vol. 2, 577-591, Cracow, Poland1996
Originalbeitrag in Fachzeitschrift
** Ehart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. Characterization of crack propagation in particle board..
Wood Sci. Techn., 30, 307-321 WoS** Elser, M; Tschegg, EK; Finger, N; StanzlTschegg, SE Fracture behaviour of polypropylene-fibre-reinforced concrete: Modelling and computer simulation.
COMPOSITES SCI TECHNOL. 1996; 56(8): 947-956. WoS** Elser, M; Tschegg, EK; StanzlTschegg, SE Fracture behaviour of polypropylene-fibre-reinforced concrete under biaxial loading: An experimental investigation.
COMPOSITES SCI TECHNOL. 1996; 56(8): 933-945. WoS** Jakob, HF; Tschegg, SE; Fratzl, P Hydration dependence of the wood-cell wall structure in Picea abies. A small-angle X-ray scattering study.
MACROMOLECULES. 1996; 29(26): 8435-8440. WoS** Papakyriacou, M., Mayer, H. R., Tschegg-Stanzl, S. E., Gröschl, M. Fatigue properties of Al2O3 particle reinforced 6061 aluminium alloy in the high-cycle regime..
Int. J. Fatigue, 18, 7, 475-481 WoS** Stanzl-Tschegg, S. E., Tan, D. M., Tschegg, E. K. Fracture resistance to the crack propagation in wood..
Int. J. of Fracture, 75, 347-356 WoS** Stanzl-Tschegg, S. E., Tan, D. M., Tschegg, E. K. Mode II fracture tests on spruce wood..
Mokuzai Gakkaishi, Journal of the Japan Wood Research Society, 42, 7, 642-650 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Ehart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. (1996): Fracture mechanisms in particle-board-experiments and FE-simulations..
ICWSF 96, 2nd Int. Conf. on the Development of Wood Science/Technology and Forestry, Sopron, Hungary, 10-12 AprilEhart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. (1996): Fracture of PARALLAM in comparison to solid wood and particleboard..
Proc. COST 508 Conference, StuttgartEhart, R. J. A., Stanzl-Tschegg, S. E., Tschegg, E. K. (1996): Fracture properties of particle board - influence of specimen geometry..
Proc. COST 508 Conference, StuttgartMayer, H. R., Stanzl-Tschegg, S. E. (1996): High frequency torsional and axial fatigue loading of Al 2024-T351..
In: Lütjering, G., Nowack, H. (eds.): Proc. of 6th Int. Fatigue Congress, Fatigue ´96, Vol. 1, 691-696, Berlin, FRGMoritz, T., Stanzl-Tschegg, S. E., Reiterer, A. (1996): Influence of air pollution on the strength properties of wood..
Proc. 2nd Seminar on Energy and Environment, Gödöllö, HungaryPapakyriacou, M., Schijve, J., Stanzl-Tschegg, S. E. (1996): Estimation of the fiber bridging capability of two fiber-metal laminates at high cycle fatigue loading..
Proc. 6th Int. Fatigue Congress 1996, May 6-10, Berlin, GermanyPypen, Cl., Mayer, H., Stanzl-Tschegg, S., Plenk Jr., H. (1996): Fatigue properties of annealed and cold worked implant metals..
Proc. 5th World Biomat. Cong., May 29-June, Toronto, CanadaReiterer, A., Stanzl-Tschegg, S. E., Fratzl, P. (1996): The ultrastructure of spruce investigated by small-angle X-ray scattering..
Proc. 2nd Seminar on Energy and Environment, Gödöllö, HungaryStanzl-Tschegg, S. E. (1996): Ultrasonic fatigue..
In: Lütjering, G., Nowack, H. (eds.): Proc. of 6th Int. Fatigue Congress, Fatigue ´96, 6-10 May, Berlin, FRGTschegg, E. K., Elser, M., Stanzl-Tschegg, S. E. (1996): Biaxial fracture behaviour of fiber reinforced concrete..
Int. Congress Concrete in the Service of Mankind. 24-28 June 1996, Dundee, ScotlandTschegg, E. K., Stanzl-Tschegg, S. E., Litzka, J. (1996): Fracutre behaviour and bond strength of bitumen layers..
3rd RILEM Conf. Reflective cracking in Pavements, Maastricht, Oct. 2-4Originalbeitrag in Sammelwerk
Mayer, H. R., Tschegg, E. K., Stanzl-Tschegg, S. E. (1996): High cycle torsion fatigue of ceramic materials under combined loading conditions (cyclic torsion and static compression)..
In: Pineau, A., Cailletaud, G., Lindley, T. C. (eds.): Multiaxial fatigue and design. ESIS 21, 411-421, London: Mech. Eng. Publ1995
Originalbeitrag in Fachzeitschrift
** Jakob, H., Fengel, D., Stanzl-Tschegg, S. E., Fratzl, P. The elementary cellulose fibril in Picea Abies comparison of transmission electron microscopy, small-angle X-ray scattering and wide-angle X-ray scattering results..
Macromolecules, 28, 8782-8787 WoS** Mayer, H. R., Stanzl-Tschegg, S. E., Sawaki, Y., Hühner, M., Hornbogen, E. Influence of transformation induced crack closure on slow fatigue crack growth under variable amplitude loading..
Fatigue Fract. Eng. Mater. Struct., 18, 9, 935-948 WoS** Papakyriacou, M., Mayer, H. R., Tschegg-Stanzl, S. E., Gröschl, M. Near-threshold fatigue crack growth in Al2O3-particle reinforced 6061 aluminium alloy..
Fatigue Fract. Eng. Mater. Struct., 18, 4, 477-487 WoS** Stanzl-Tschegg, S. E., Tan, D. M., Tschegg, E. K. New splitting test method for wood - development and experiences..
Wood Sci. Techn., 29, ?, 31-50 WoS** Stanzl-Tschegg, S.E., Mayer, H.R., Beste, A., Kroll, S. Fatigue and Fatigue Crack Propagation in AlSi7Mg Cast Alloys under In-Service Loading Conditions..
Int. J. Fatigue, 17, 2, 149-156 WoS** Tan, D. M., Stanzl-Tschegg, S.E., Tschegg, E. K. Models of wood fracture in mode I and mode II..
Holz als Roh- und Werkstoff, 53, 159-164 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Ishiguro, S., Tschegg, E. K., Travnicek, R., Stanzl-Tschegg, S.E. (1995): Mode I fracture behaviour of recycled concrete..
In: Wittmann, F. H. (ed.): Fracture mechanics of concrete structures. 145-154, Proc. of FRAMCOS-2, D-79104 Freiburg. Aedification PubPapakyriacou, M., Stanzl-Tschegg, S. E., Schijve, J. (1995): Fatigue behaviour of notched components of fiber-reinforced hybrid composite material..
Proc. Int. Symposium Fatigue Design, Sept. 5-8, 1995, Helsinki, FinlandPypen, Cl., Helsen, J., Mayer, H., Tschegg, S., Ettmayer, P., Plenk Jr., H. (1995): The mechanical properties of niobium an tantalum reevaluated..
Proc. 21st Ann. Meet. of Soc. for Biomat., March 18-22, p. 348, San Francisco, CAStanzl-Tschegg, S., Hinterstoisser, B., Halbwachs, G., Grabherr, M., Hofer, S., Hofinger, A., Mengl, M., Wagenführ, R., Wallner, G., Wimmer, R. (1995): Wood as a bioindicator of air pollution impact on forest ecosystems..
Proc. 20th IUFRO World Congress, 41-42, Tampere, FinlandTschegg, E. K., Tschegg, S.E., Zikmunda, W. (1995): Influence of surface roughness on the adherence between old and new concrete layers in road constructions..
Proc. 20. Cong. Mondial de la Route, Sept. 1995, MontréalOriginalbeitrag in Sammelwerk
Halbwachs, G., Grabner, M., Hinterstoisser, B., Hofer, S., Hofinger, A., Mengl, M., Tschegg, S., Wagenführ, R., Wallner, G., Wimmer, R. (1995): Wood as a bioindicator of air pollution impact on forest ecosystems..
In: Korpilahti, E., Salomen, T., Oja, S. (eds.): Caring for the forest - Research in a changing world. Abstracts of invited papers. IUFRO XX. World Congress, 6-12.9.1995, 41-42, Tampere, FinlandTschegg, E. K., Stanzl-Tschegg, S. E. (1995): Versagen von Glas bei zyklischer Druckbeanspruchung..
In: Bossert, J., Claussen, N., Nitsche, R. (eds.): Verbundwerkstofforschung. 358-367, Renningen-Malsheim: Expert Verlag1994
Originalbeitrag in Fachzeitschrift
** Jakob, H., Fratzl, P., Stanzl-Tschegg, S. E. Size and arrangement of elementary cellulose fibrils in wood A small-angle X-ray scattering study of Picea Abies..
J. Structural Biology, 113, 13-22 WoS** STANZLTSCHEGG, SE; TSCHEGG, EK; TEISCHINGER, A FRACTURE ENERGY OF SPRUCE WOOD AFTER DIFFERENT DRYING PROCEDURES.
WOOD FIBER SCI. 1994; 26(4): 467-478. WoS** TSCHEGG, EK; TSCHEGGSTANZL, SE COMPRESSIVE FATIGUE-CRACK GROWTH-BEHAVIOR OF ALUMINA AND GLASS.
J MATER SCI. 1994; 29(11): 2867-2872. WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Mayer, H. R., Tschegg, E. K., Stanzl-Tschegg, S. E. (1994): High cycle torsion fatigue of ceramic materials under combined loading conditions (cyclic torsion + static compression)..
Proc. 4th Int. Conf. on Biaxial/Multiaxial fatigue, Vol. 2, 357-368, ParisPapakyriacou, M., Stanzl-Tschegg, S. E., Mayer, H. R., Schijve, J. (1994): Fatigue crack growth in glare, role of glass fibers..
In: Schwalbe, K.-H., Berger, C. (Eds.): Proc. of 10th Europ. Conf. Fract., Sept. 20-23, Vol. 2, 1193-1199, BerlinTan, D. M., Tschegg, E. K., Stanzl-Tschegg, S. E. (1994): Fracture mechanical characterization of asphalt aggregate mixtures at different temperatures..
In: Alisbadi, M. H. et al. (eds.): Proc. of Localized Damage III. Computer-Aided Assessment and Control, 217-224, CPM, Southampton BostonTschegg, E. K., Zikmunda, W., Stanzl-Tschegg, S. E. (1994): Improvement of new-old concrete bonds in road constructions - procedures and testing method..
Proc. 7th International Symposium on Concrete Roads, Vienna, 3-5 Oct. 1994, Vol. 2/3, 51-561993
Originalbeitrag in Fachzeitschrift
** Mayer, H. R., Stanzl-Tschegg, S. E., Tan, D. M. FEM-modelling of stress intensity factors for fatigue crack growth at ultrasonic frequencies..
Engng. Fract. Mech., 45, 4, 487-495 WoS** Mayer, H. R., Tschegg, S. E., Tan, D. M. Spannungsintensitätsfaktor einer seitengekerbten Probe bei Ultraschall-Resonanzermüdung..
Z. Metallkde., 84, 7, 509 512 WoS** Stanzl-Tschegg, S. E., Mayer, H. R., Tschegg, E. K., Beste, A. In-service loading of AlSi11 aluminium cast alloy in the very high cycle regime..
Int. J. Fatigue, 15, 4, 311-316 WoS** STANZLTSCHEGG, SE; MAYER, HR; TSCHEGG, EK HIGH-FREQUENCY METHOD FOR TORSION FATIGUE TESTING.
ULTRASONICS. 1993; 31(4): 275-280. WoS** Tschegg, E. K., Tan, D. M., Kirchner, H. O., Stanzl, S. E. Interfacial and subinterfacial fracture in concrete..
Acta Metallurgica et Materialia, 41, 8, 569-576 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Stanzl-Tschegg, S. E., König, J., Tschegg, E. K. (1993): Near threshold fatigue crack growth of Al-Li-alloys..
In: Bailon, J. P., Dickson, J. J. (eds.): Conf. Proc. on Fatigue 93, Montreal, EMAS, 311-316Tschegg, E. K., Stanzl-Tschegg, S. E., Litzka, J. (1993): New testing method to characterize mode I fracturing of asphalt aggregate mixtures..
In: Rigo, J. M., Degeimbre, R., Francken, L. (eds.): Reflective cracking in pavements. Conf. Proc. 2nd RILEM Conference, 263-270, LiègeOriginalbeitrag in Sammelwerk
Stanzl-Tschegg, S. E., Papakyriacou, M., Mayer, H. R., Schijve, J., Tschegg, E. K. (1993): High cycle fatigue crack growth properties of aramid reinforced aluminum laminates..
In: Stinchcomb, W. W., Ashbaugh, N. E. (Eds.): Composite materials fatigue and fracture. ASTM STP 1156, American Society for Testing and Materials, Vol. 4, 637-652, Philadelphia1992
Originalbeitrag in Fachzeitschrift
** Mayer, H. R., Stanzl, S. E., Tschegg, E. K., Schijve, J. Fatigue crack growth of Al 2024-T3 under low amplitude two-step loading..
Fatigue Fract. Eng. Mater. Struct., 15, 3, 265-275 WoS** Tschegg, E. K., Stanzl, S. E., Mayer, H. R., Czegley, M. Crack face interactions and near-threshold fatigue crack growth under mixed mode loading conditions..
Fatigue Fract. Eng. Mater. Struct., 16, 1, 71-83 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Stanzl, S. E., Papakyriacou, M., Tschegg, E. K. (1992): Fibre bridging in aramid reinforced aluminum alloy composites..
In: Arnberg, L., Lohne, O., Nes, E., Ryum, N. (eds.): Aluminum alloys. ICAA3, Vol. I, 548-553, The Norwegian Inst. of Techn., Trondheim, Norway1991
Originalbeitrag in Fachzeitschrift
** Mayer, H. R., Stanzl, S. E., Tschegg, E. K. Fatigue crack propagation in the threshold regime after rapid load reduction..
Eng. Fract. Mech., 40, 6, 1035-1043 WoS** Stanzl, S. E., Mayer, H. R., Tschegg, E. K. The influence of air humidity on near-threshold fatigue crack growth of 2024-T3 aluminum alloy..
Mat. Sci. Eng., A147, 45-54 WoS** Tschegg, E. K., Stanzl, S. E. Adhesive power measurements of bonds between old and new concrete..
J. Mat. Sci., 26, 5189-5194 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Mayer, H. R., Stanzl-Tschegg, S. E. (1991): Delayed fatigue crack growth of two aluminum alloys after rapid load reduction in the threshold regime..
In: Czoboly, E. (ed.): Proc. of the 10th Congress on Material Testing, II, Budapest 1991, 526-531Tschegg, E. K., Stanzl, S. E. (1991): Adhesive power of bonded concrete..
Proc. Int. Conf. Fracture Processes in Brittled Disordered Materials, June 19-21, 1991, Noordwijk, NiederlandeOriginalbeitrag in Sammelwerk
Stanzl-Tschegg, S. E., Mayer, H. R., Tschegg, E. K. (1991): High-cycle fatigue of 2024-T3 aluminum alloy in humid environments..
In: Mayr, P., Vöhringer, O., Wohlfahrt, H. (eds.): Werkstoffkunde, Beiträge zu den Grundlagen und zur interdisziplinären Anwendung. DGM VerlagTschegg, E. K., Mayer, H. R., Czegley, M., Stanzl, S. E. (1991): Influence of a constant mode III load on mode I fatigue crack growth thresholds..
In: Kussmaul, K., McDiarmid, D., Socie, D. (eds.): Fatigue under biaxial and multiaxial loading. ESIS 10. Mech. Eng. Pub., 213-222, London1990
Originalbeitrag in Fachzeitschrift
** Buchinger, L., Stanzl, S., Laird, C. Dislocation structures produced by low-amplitude fatigue of copper single crystals at 77K..
Philosophical Magazine A, Vol. 62, 6, 633-651 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Tschegg, E. K., Stanzl, S. E. (1990): Fatigue crack propagation under rotating bending..
In: Kitagawa, H., Tanaka, T. (eds.): Proc. of the Int. Fatigue Series 'Fatigue 90'. Vol. 2, 1217-12221989
Originalbeitrag in Sammelwerk
Stanzl, S. E., Czegley, M., Mayer, H., Tschegg, E. K. (1989): Fatigue crack growth under combined mode I and mode II loading..
In: Wei, R. P., Gangloff, R. P. (eds.): ASTM STP 1020, 479-4961988
Stanzl, S. E., Mayer, H. R., Czegley, M., Tschegg, E. K. (1988): The influence of a static shear load on slow fatigue crack growth..
In: Czoboly, E. (ed.): Failure analysis - theory and practice. EMAS Eng. Mat. A. D. Serv., Vol. II, 1123-1131Stanzl, S. E., Tschegg, E. K. (1988): Near threshold fatigue crack propagation..
In: Lukas, P., Polak, J. (eds.): Basic mechanisms in fatigue of metals. 323-330Tschegg, E. K., Stanzl, S. E. (1988): The significance of sliding crack closure on mode III fatigue crack growth..
In: Fong, J. T., Fields, R. J. (eds.): Fundamental questions and critical experiments on fatigue. 1, ASTM-STP, American Soc. for Testing and Materials, 954, 214-2321987
Stanzl, S. E., Tschegg, E. K. (1987): Effect of spectrum loading on fatigue crack growth in the threshold-regime..
In: Yan, M. G., Zheng, S. H., Zheng, Z. M. (eds.): Mechanical behavior of materials V. Vol. 1, 665-670, Pergamon PressUngar, T., Stanzl, S. E., Gaal, I., Gromma, I., Kovacs, I. (1987): The correlation between the cyclic saturation stress and the dislocation structure in single slip oriented Cu at low fatigue amplitudes..
In: Andersen, S. I. et al. (eds.): Constitutive relations and their physical basis. 523-528, Riso Nat. Lab., Roskilde, Dänemark1986
Originalbeitrag in Fachzeitschrift
** Buchinger, L., Cheng, A. S., Laird, C., Stanzl, S. The cyclic stress-strain response and dislocation structures of Cu-16 at % Al alloy Part III, Single crystals fatigued at low strain amplitudes..
Mat. Sci. Eng., 80, 155-167 WoS** Laird, C., Stanzl, S. E., de la Veaux, R., Buchinger, L. The cyclic stress-strain response and dislocation structures of Cu-16% Al alloy Part II, Polycrystalline behavior..
Mat. Sci. Eng., 80, 143-154 WoS** Stanzl, S. E., Tschegg, E. K., Mayer, H. R. Lifetime measurements for random loading in the very high cycle fatigue range..
Int. J. Fatigue, 8, 4, 195-200 WoS** Stanzl, S. E., Tschegg, E. K., Mayer, H. R. Slow fatigue crack growth under step and random loading..
Z. Metallkunde, 77, 9, 588-594 WoS** Tschegg, E. K., Stanzl, S., Argon, A. S. A simple tension-torsion creep-fracture device..
J. Physics, E, 19, 1009-1012 WoS** Yan, B. D., Cheng, A. S., Buchinger, L., Stanzl, S., Laird, C. Cyclic stress-strain response of single crystals of Cu-16 at % Al Part I, Cyclic hardening and strain localization..
Mat. Sci. Eng., 80, 129-142 WoS1985
Patent
Tschegg, E. K., Stanzl, S. E., Czegley, M. (1985): Vorrichtung zur Überlagerung einer konstanten oder veränderlichen Kraft und einer Ultraschallschwingung..
Österr. Patent AT 384754 B, Int. Cl. B06B3/00 vom 11.1.88; Anmeldetag 17.121984
Originalbeitrag in Fachzeitschrift
** Buchinger, L., Stanzl, S. E., Laird, C. Dislocation structures in copper single crystals fatigued at low amplitudes..
Phil. Mag., 50, 2, 275-298 WoSPatent
Stanzl, S. (1984): Ultraschallprüfeinrichtung..
Österr. Patent AT 388053 B, Int. Cl. GO1N 29/04, 3/22 vom 25.4.1989, Anmeldetag 7.12Originalbeitrag in Sammelwerk
Stanzl, S. E., Ebenberger, H. M. (1984): Concepts of fatigue crack growth thresholds gained by the ultrasound method..
In: Davidson, D., Suresh, S. (eds.): Fatigue crack growth concepts. The Met. Soc. of AIME, 399-416Stanzl, S. E., Hollanek, W., Tschegg, E. K. (1984): Fatigue and fracture under variable-amplitude loading at ultrasonic frequency..
In: Valluri, S. R., Taplin, D. M. R., Rama Rao, T., Knott, J. F., Dubey, R. (eds.): Advances in fracture research. Vol. 5, 3645-3651983
Originalbeitrag in Fachzeitschrift
** Stanzl, S. E., Argon, A. S., Tschegg, E. K. Diffusive intergranular cavity growth in creep in tension and torsion..
Acta Met., 31, 833-843 WoSOriginalbeitrag in Sammelwerk
Stanzl, S. E., Tschegg, E. K. (1983): Fatigue crack growth and threshold behavior at ultrasonic frequencies..
In: Lewis, J. C., Sines, G. (eds.): ASTM STP, 791, II, 3-181982
Originalbeitrag in Fachzeitschrift
** Tauschitz, C., Tschegg, E. K., Stanzl, S. E. Untersuchungen zur Elektronenstrahl-Schweißbarkeit einer hochwarmfesten Eisenbasis-Legierung (A 286)..
Z. Metallkde, 73, 717-724 WoS** Tschegg, E. K., Tauschitz, C., Stanzl, S. E. The fatigue crack growth behavior of electron-beam welded A286 superalloy..
Metall. Trans. A., 13A, 1483-1489 WoSOriginalbeitrag in Sammelwerk
Stanzl, S. E., Tschegg, E. K. (1982): Effect of environment on near-threshold fatigue crack growth at ultrasonic frequencies..
In: Wells, J. M., Buck, O., Roth, L. D., Tien, J. K. (eds.): Ultrasonic fatigue. The metallurgical society of AIME, 553-561Tschegg, E. K., Stanzl, S. E. (1982): Near-threshold fatigue crack growth determination at ultrasonic frequencies..
In: Wells, J. M., Buck, O., Roth, L. D., Tien, J. K. (eds.): Ultrasonic fatigue. The metallurgical society of AIME, 473-4801981
Originalbeitrag in Fachzeitschrift
** Stanzl, S. A new experimental method for measuring life time and crack growth of materials under multi-stage and random loadings..
Ultrasonics, 19, 6, 269-272 WoS** Stanzl, S., Tschegg, E. Influence of environment on fatigue crack growth in the threshold region..
Acta Met., 29, 21-32 WoS** Tschegg, E., Stanzl, S. Fatigue crack propagation and threshold in b.c.c. and f.c.c. metals at 77 and 293 K..
Acta Met., 29, 33-40 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Czoboly, E., Stanzl, S., Havas, I., Koller, T. (1981): A keplekeny alakoaltozas eloszlasa abemetszes könyezeteben..
GEP XIII evfolyam, 8. szam. Aug., 298-302Tschegg, E. K., Ritchie, R. O., Stanzl, S. E. (1981): Ultrasonic methods for determination of near-threshold fatigue crack growth rates..
In: Backlund, J., Blom, A., Beevers, C. J. (eds.): Fatigue thresholds. EMAS, Proc. of the Int. Symp. Stockholm 1981, Vol. I, 99-112, Warley, U.K. Publ. Ltd1980
Originalbeitrag in Fachzeitschrift
** Hornbogen, E., Minuth, E. M., Stanzl, S. Quantitative analysis of plastic deformation at the crack tip by recrystallization..
Mat. Sci. Eng., 43, 145-150 WoS** Stanzl, S. Über den Einfluß der Frobendicke auf die Ermüdungsrißwachstumsgeschwindigkeit..
Z. Metallkde., 71, 195-202 WoS** STANZL, SE HIGH-FREQUENCY FATIGUE CRACK-GROWTH AND THRESHOLD BEHAVIOR IN MONO-CRYSTALLINE COPPER.
SCR METALL. 1980; 14(7): 749-753. WoS** Tschegg, E., Faltin, F., Stanzl, S. X-ray microbeam and recrystallization studies of the plastic deformation around fatigue cracks..
J. Mat. Sci., 15, 131-138 WoSPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Czoboly, E., Stanzl, S., Havas, I., Koller, T. (1980): Distribution of plastic deformation around a notch tip..
Conference Proceedings of the International Conference on Analytical and Experimental Fracture Mechanics, Rome1977
Stanzl, S., Mitsche, R. (1977): High frequency fatigue of metals, crack initiation and propagation..
Fracture, 2B, Proc. ICF4, 749-754, Waterloo/KanadaStanzl, S., Mitsche, R. (1977): Rißgeschwindigkeit und Bruchaussehen bei hochfrequenter Wechselbeanspruchung..
Tagungsband 8. Sitzung des Arbeitskreises Rastermikroskopie im DVM Tag 1977, BerlinOriginalbeitrag in Sammelwerk
Mitsche, R., Stanzl, S. (1977): Auswertung von Ultraschallbrüchen von metallischen Werkstoffen..
In: Petzow, G. (Hrsg.): Gefüge und Bruch. Materialkundlich-Technische Reihe 3, Berlin: Gebrüder Borntraeger1974
PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Stanzl, S., Mitsche, R. (1974): Schnellbestimmung der Wechselfestigkeitswerte von technischen Eisenwerkstoffen durch Verwendung von Ultraschall..
Proc. 5h conference on dimensioning and strength calculations and the sixth congress on material testing, 2, 67-72, Budapest1970
Stanzl, S., Mitsche, R. (1970): Wöhler curves of soft iron obtained at 20 kHz..
Proc. Int. Symp. on High Power Ultrasonics, 1st, 59-65, Graz