BOKU - Universität für Bodenkultur Wien - Forschungsinformationssystem
Konnerth Johannes
>> Wissenstransfer
** = Publikationen gelistet in SCI/SSCI (veröffentlicht im Web of Science)
* = Publikationen in sonstigen peer-reviewten Journalen (ggf. noch nicht im WoS veröffentlicht)
Filter: Originalarbeit, Übersichtsarbeit, Konferenzband Originalarbeit
= Open Access - Publikationen
2023
Originalbeitrag in Fachzeitschrift
** Averina, E; Konnerth, J; Van Herwijnen, HWG Protein-based glyoxal-polyethyleneimine-crosslinked adhesives for wood bonding.
J ADHESION. 2023; 99(3): 363-378. WoS FullText FullText_BOKU** Kumpenza, C; Pramreiter, M; Nenning, TJ; Bliem, P; Reiterer, R; Konnerth, J; Muller, U Temperature-related tensile modulus of polymer-based adhesive films.
J ADHESION. 2023; 99(2): 259-276. WoS FullText FullText_BOKU2022
** Averina, E; Konnerth, J; van Herwijnen, HWG Protein Adhesives: Investigation of Factors Affecting Wet Strength of Alkaline Treated Proteins Crosslinked with Glyoxal.
POLYMERS-BASEL. 2022; 14(20), 4351
WoS
PubMed
FullText
FullText_BOKU
** Bliem, P; van Herwijnen, HWG; Meissl, R; Stadlbauer, W; Konnerth, J Engineering of open assembly time of water-based polyvinyl acetate (PVAc) wood adhesives by post-addition of additives.
INT J ADHES ADHES. 2022; 117, 103011 WoS FullText FullText_BOKU** Gusenbauer, C; Peter, K; Cabane, E; Konnerth, J Local force titration of wood surfaces by chemical force microscopy.
CELLULOSE. 2022; 29(2): 763-776. WoS PubMed
FullText
FullText_BOKU
** Jakob, M; Mahendran, AR; Gindl-Altmutter, W; Bliem, P; Konnerth, J; Muller, U; Veigel, S The strength and stiffness of oriented wood and cellulose-fibre materials: A review.
PROG MATER SCI. 2022; 125, 100916 WoS FullText FullText_BOKU** Ramachandrareddy, B; Herwijnen, HWGV; Beck, G; Bredesen, R; Konnerth, J Mechanical properties of wood adhesive bond lines tested in service classes according to Eurocode 5.
INT J ADHES ADHES. 2022; 118, 103233 WoS FullText FullText_BOKU** Rosenfeld, C; Sailer-Kronlachner, W; Konnerth, J; Sol-Rindler, P; Pellis, A; Rosenau, T; Potthast, A; van Herwijnen, HWG Hydroxymethylfurfural: A key to increased reactivity and performance of fructose-based adhesives for particle boards.
IND CROP PROD. 2022; 187, 115536 WoS FullText FullText_BOKU** Rosenfeld, C; Solt-Rindler, P; Sailer-Kronlachner, W; Kuncinger, T; Konnerth, J; Geyer, A; van Herwijnen, HWG Effect of Mat Moisture Content, Adhesive Amount and Press Time on the Performance of Particleboards Bonded with Fructose-Based Adhesives.
MATERIALS. 2022; 15(23), 8701
WoS
PubMed
FullText
FullText_BOKU
** Tran, A; Konnerth, J; van Herwijnen, HWG; Gindl-Altmutter, W Low temperature and moisture dependent curing behavior of selected wood adhesives.
INT J ADHES ADHES. 2022; 117, 103178 WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Ramachandrareddy, B; van Herwijnen, HWG; Beck, G; Bredesen, R; Konnerth J
(2022): Characterization of flexible melamine-urea-formaldehyde adhesives for CLT
applications.
[International Conference on Wood Adhesives, ICWA 2022, Portland, OR, USA, 11.05.2022 - 13.05.2022]
Rosenfeld, C; Sailer-Kronlachner, W; Konnerth, J; Geyer, A; van Herwijnen, H.W.G.
(2022): Effect of Hydroxymethylfurfural on the Cure Speed in Fructose-based Adhesives for Interior Particleboards.
[International Conference on Wood Adhesives 2022, Portland, OR, USA, 11.05.2022 - 13.05.2022]
Rosner, S.; Luss, S.; Konnerth, J.; Kunert, N.
(2022): The predictive quality of radial compression strength for vulnerability to cavitation.
[5th Xylem International Meeting, Würzburg, 19.09.2022-21.09.2022]
Sailer-Kronlachner, W; Rosenfeld, C; Bacher, M; Böhmdorfer, S; Konnerth, J; Geyer, A; van Herwijnen, H.W.G,
(2022): Development of an in-situ approach towards sustainable, carbohydrate-based adhesives.
[International Conference on Wood Adhesives, Portland, OR, USA, 11.05.2022 - 13.05.2022]
2021
Originalbeitrag in Fachzeitschrift
** Averina, E; Konnerth, J; D'Amico, S; van Herwijnen, HWG Protein adhesives: Alkaline hydrolysis of different crop proteins as modification for improved wood bonding performance.
IND CROP PROD. 2021; 161, 113187
WoS
FullText
FullText_BOKU
** Csarman, F; Gusenbauer, C; Wohlschlager, L; van Erven, G; Kabel, MA; Konnerth, J; Potthast, A; Ludwig, R; Non-productive binding of cellobiohydrolase i investigated by surface plasmon resonance spectroscopy..
Cellulose (Lond). 2021; 28(15):9525-9545
WoS
PubMed
FullText
FullText_BOKU
** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Systematic assessment of wheat extenders in condensation resins for plywood production: Part I-physico-chemical adhesive properties.
J ADHESION. 2021; 97(15): 1404-1422. WoS FullText FullText_BOKU** Hogger, EM; Van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Systematic assessment of wheat extenders in formaldehyde-condensation plywood resins: part II - mechanical properties of plywood panels.
J ADHESION. 2021; 97(14): 1310-1321. WoS FullText FullText_BOKU** Pramreiter, M; Stadlmann, A; Huber, C; Konnerth, J; Halbauer, P; Baumann, G; Muller, U The Influence of Thickness on the Tensile Strength of Finnish Birch Veneers under Varying Load Angles.
FORESTS. 2021; 12(1), 87
WoS
FullText
FullText_BOKU
** Sailer-Kronlachner, W; Thoma, C; Böhmdorfer, S; Bacher, M; Konnerth, J; Rosenau, T; Potthast, A; Solt, P; van Herwijnen, HWG; Sulfuric Acid-Catalyzed Dehydratization of Carbohydrates for the Production of Adhesive Precursors..
ACS Omega. 2021; 6(25):16641-16648
WoS
PubMed
FullText
FullText_BOKU
** Thoma, C; Solt-Rindler, P; Sailer-Kronlachner, W; Rosenau, T; Potthast, A; Konnerth, J; Pellis, A; van Herwijnen, HWG Carbohydrate-hydroxymethylfurfural-amine adhesives: Chemorheological analysis and rheokinetic study.
POLYMER. 2021; 231, 124128
WoS
FullText
FullText_BOKU
* Pramreiter, M; Bodner, S C; Keckes, J; Stadlmann, A; Konnerth, J; Feist, F; Baumann, G; Huber, C; Müller, U (2021): Zerstörungsfreie Charakterisierung von Furnieren für strukturelle Verbundwerkstoffe - Evaluierung von Methoden und Einflussfaktoren.
Holztechnologie, 62 (1), 5-18; ISSN 0018-3881* Thoma, C; Solt, P; Sailer-Kronlachner, W; Rosenau, T; Potthast, A; Konnerth, J; Pellis, A; van Herwijnen, HWG; (2021): Dataset for chemorheological and rheokinetic analysis of carbohydrate-HMF-amine adhesives..
Data Brief. 2021; 39:107465
PubMed
FullText
FullText_BOKU
PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J
(2021): Factors influencing open-assembly time of polyvinyl acetate (PVAc) adhesives.
[6th International Conference on Structural Adhesive Bonding AB 2021, Porto, Portugal, 08.07.2021 - 09.07.2021]
Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J
(2021): Additives as a modification tool for water-based polyvinyl acetate (PVAc) adhesives.
[6th International conference on structural adhesive bonding, Porto, Portugal, 08.07.2021 - 09.07.2021]
Hogger, E M; Konnerth, J; Moser, J; Kantner, W; van Herwijnen, H W G;
(2021): Reduction of formaldehyde-based adhesives in plywood production by adding renewable additives.
[First international “Salzburg Conference for Smart Materials”, Kuchl, Austria, 16.09.2021 - 17.09.2021]
Jimenez Bartolome, M; Bischof, S; Pellis, A; Konnerth, J; Wimmer, R; Weber, H; Schwaiger, N; Guebitz, G.M.; Nyanhongo, G. S.
(2021): Improving polymerized lignin properties using green plasticizers..
[International Conference on Renewable Resources and Biorefineries., Aveiro, Portugal, 06.09.2021 - 08.09.2021]
Konnerth, J; Huber, C; Bliem, P; Obernosterer, D; Solt-Rindler, P; Jeitler, G; Grabner, M; Müller, U; van Herwijnen, H; Pramreiter, M;
(2021): Opportunities and challenges coming with hardwood use for structural applications.
[9th Hardwood Conference 2021, Sopron, Hungary, 24.06.2021 - 25.06.2021]
Liebner, F; Plappert, S; Konnerth, J; Nedelec, JM
(2021): Transdermal NSAID release patches made from anisotropic 2,3-dicarboxycellulose hydrogel membranes.
[National Spring Meeting of the American Chemical Society ACS 2021 - Macromolecular Chemistry: The Second Century, Online, 05.04.2021 - 30.04.2021]
Thoma, Catherine; Sailer-Kronlachner, Wilfried; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, Hendrikus W. G.
(2021): Reactive adhesives derived from carbohydrate-based precursors.
[Poster]
[EURADH 2021, Vienna, Austria, 06.10.2021 - 07.10.2021]
Thoma, Catherine; Sailer-Kronlachner, Wilfried; Solt-Rindler, Pia, Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, H.W.G.
(2021): Lab-scale testing of carbohydrate-based adhesives for wood-based products
.
[Poster]
[EFIB 2021, Vienna, Austria, 06.10.2021 - 07.10.2021]
Thoma, Catherine; Solt-Rindler, Pia; Sailer-Kronlachner, Wilfried; Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Pellis, Alessandro; van Herwijnen, Hendrikus W. G.
(2021): Chemorheological analysis and rheokinetic study of carbohydrate-hydroxymethylfurfural-amine adhesive.
[EURADH 2021, Online, 11.10.2021]
2020
Originalbeitrag in Fachzeitschrift
** Bartolome, MJ; Bischof, S; Pellis, A; Konnerth, J; Wimmer, R; Weber, H; Schwaiger, N; Guebitz, GM; Nyanhongo, GS Enzymatic synthesis and tailoring lignin properties: A systematic study on the effects of plasticizers.
POLYMER. 2020; 202, 122725 WoS FullText FullText_BOKU** Bliem, P; Fromel-Frybort, S; van Herwijnen, HWG; Pinkl, S; Krenke, T; Mauritz, R; Konnerth, J Engineering of material properties by adhesive selection at the example of a novel structural wood material.
J ADHESION. 2020; 96(1-4): 144-164. WoS FullText FullText_BOKU** Bliem, P; Konnerth, J; Fromel-Frybort, S; Gartner, C; Mauritz, R; van Herwijnen, HWG Influence of drying and curing parameters on phenol-formaldehyde impregnated wood veneers.
J ADHESION. 2020; 96(1-4): 253-271. WoS FullText FullText_BOKU** Bockel, S; Harling, S; Gronquist, P; Niemz, P; Pichelin, F; Weiland, G; Konnerth, J Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength.
EUR J WOOD WOOD PROD. 2020; 78(3): 449-459.
WoS
FullText
FullText_BOKU
** Bockel, S; Harling, S; Konnerth, J; Niemz, P; Weiland, G; Hogger, E; Pichelin, F Modifying elastic modulus of two-component polyurethane adhesive for structural hardwood bonding.
J WOOD SCI. 2020; 66(1), 69
WoS
FullText
FullText_BOKU
** Gusenbauer, C; Jakob, DS; Xu, XG; Vezenov, DV; Cabane, E; Konnerth, J Nanoscale Chemical Features of the Natural Fibrous Material Wood.
BIOMACROMOLECULES. 2020; 21(10): 4244-4252.
WoS
PubMed
FullText
FullText_BOKU
** Gusenbauer, C; Nypelo, T; Jakob, DS; Xu, XJG; Vezenov, DV; Asaadi, S; Sixta, H; Konnerth, J Differences in surface chemistry of regenerated lignocellulose fibers determined by chemically sensitive scanning probe microscopy.
INT J BIOL MACROMOL. 2020; 165: 2520-2527.
WoS
FullText
FullText_BOKU
** Herzele, S; van Herwijnen, HWG; Griesser, T; Gindl-Altmutter, W; Rossler, C; Konnerth, J Differences in adhesion between 1C-PUR and MUF wood adhesives to (ligno)cellulosic surfaces revealed by nanoindentation.
INT J ADHES ADHES. 2020; 98, 102507
WoS
FullText
FullText_BOKU
** Huss, JC; Antreich, SJ; Bachmayr, J; Xiao, N; Eder, M; Konnerth, J; Gierlinger, N; Topological Interlocking and Geometric Stiffening as Complementary Strategies for Strong Plant Shells..
Adv Mater. 2020; 32(48):e2004519
WoS
PubMed
FullText
FullText_BOKU
** Kiefer, T; Fussl, J; Kariem, H; Konnerth, J; Gaggl, W; Hellmich, C A multi-scale material model for the estimation of the transversely isotropic thermal conductivity tensor of fired clay bricks.
J EUR CERAM SOC. 2020; 40(15): 6200-6217. WoS FullText FullText_BOKU** Solt, P; Libowitzky, S; van Herwijnen, HWG; Konnerth, J Improved method for analyzing cohesive strength development of pMDI.
WOOD SCI TECHNOL. 2020; 54(1): 7-17.
WoS
FullText
FullText_BOKU
** Sulaeva, I; Hettegger, H; Bergen, A; Rohrer, C; Kostic, M; Konnerth, J; Rosenau, T; Potthast, A; Fabrication of bacterial cellulose-based wound dressings with improved performance by impregnation with alginate..
Mater Sci Eng C Mater Biol Appl. 2020; 110:110619 WoS PubMed FullText FullText_BOKU** Thoma, C; Konnerth, J; Sailer-Kronlachner, W; Rosenau, T; Potthast, A; Solt, P; van Herwijnen, HWG Hydroxymethylfurfural and its Derivatives: Potential Key Reactants in Adhesives.
CHEMSUSCHEM. 2020; 13(20): 5408-5422.
WoS
PubMed
FullText
FullText_BOKU
** Thoma, C; Konnerth, J; Sailer-Kronlachner, W; Solt, P; Rosenau, T; van Herwijnen, HWG Current Situation of the Challenging Scale-Up Development of Hydroxymethylfurfural Production.
CHEMSUSCHEM. 2020; 13(14): 3544-3564.
WoS
PubMed
FullText
FullText_BOKU
** Tran, A; Mayr, M; Konnerth, J; Gindl-Altmutter, W Adhesive strength and micromechanics of wood bonded at low temperature.
INT J ADHES ADHES. 2020; 103, 102697
WoS
FullText
FullText_BOKU
** Winkler, C; Konnerth, J; Gibcke, J; Schafer, J; Schwarz, U Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers I: mechanical and electrical properties.
J ADHESION. 2020; 96(1-4): 165-184. WoS FullText FullText_BOKU** Winkler, C; Schafer, J; Jager, C; Konnerth, J; Schwarz, U Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers II: electrical sensitivity in compression.
J ADHESION. 2020; 96(1-4): 185-206. WoS FullText FullText_BOKU* Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Mauritz, R; Müller, U; Teischinger, A; Konnerth, J (2020): Holzwerkstoff basierend auf Partikeln hergestellt mittels einer neuartigen, nicht schneidenden Zerteilungstechnologie.
Holztechnologie, 61 (3), 30-38; ISSN 0018-3881* Hogger, E M; van Herwijnen, H W G; Moser, J; Kantner, W; Konnerth, J (2020): Einfluss der Kaltklebrigkeit auf die Vernetzung von Harnstoff-Formaldehyd-Harzen.
Holztechnologie, 61 (3), 43-48; ISSN 0018-3881* Mohan, T; Dobaj Štiglic, A; Beaumont, M; Konnerth, J; Gürer, F; Makuc, D; Maver, U; Gradišnik, L; Plavec, J; Kargl, R; Stana Kleinschek, K (2020): Generic Method for Designing Self-Standing and Dual Porous 3D Bioscaffolds from Cellulosic Nanomaterials for Tissue Engineering Applications.
ACS ABM, 3(2), 1197-1209; ISSN 2576-6422 FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Plappert, S; Konnerth, J; Nedelec, JM; Liebner, F
(2020): Anisotropic nanocellulose gel membranes for drug delivery: tailoring structure and interface by sequential periodate - chlorite oxidation
.
[International Conference on Aerogels for Biomedical and Environmental Applications
, Santiago de Compostella, Spain, 18.02.2020 - 20.02.2020]
Tran, A; Mayr, M; Konnerth, J; Gindl-Altmutter, W
(2020): Low Temperature Adhesive Bonding for Structural Wood Materials.
[SWST International Convention 2020, Online, 12.07.2020 - 15.07.2020]
2019
Originalbeitrag in Fachzeitschrift
** Bader, M; Nemeth, R; Konnerth, J Micromechanical properties of longitudinally compressed wood.
EUR J WOOD WOOD PROD. 2019; 77(3): 341-351.
WoS
FullText
FullText_BOKU
** Bockel, S; Mayer, I; Konnerth, J; Harling, S; Niemz, P; Swaboda, C; Beyer, M; Bieri, N; Weiland, G; Pichelin, F The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems.
INT J ADHES ADHES. 2019; 91: 43-53. WoS FullText FullText_BOKU** Gusenbauer, C; Cabane, E; Gierlinger, N; Colson, J; Konnerth, J; Visualization of the Stimuli-responsive Surface Behavior of Functionalized Wood Material by Chemical Force Microscopy..
Sci Rep. 2019; 9(1):18569
WoS
PubMed
FullText
FullText_BOKU
** Hogger, E; Bauer, K; Hollbacher, E; Gierlinger, N; Konnerth, J; van Herwijnen, HWG Time-dependent ammonia emissions from fumed oak wood determined by micro-chamber/thermal extractor (mu CTE) and FTIR-ATR spectroscopy.
HOLZFORSCHUNG. 2019; 73(2): 165-170. WoS FullText FullText_BOKU** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Influence of cold tack properties on bond performance of cured urea-formaldehyde resin.
EUR J WOOD WOOD PROD. 2019; 77(3): 487-490.
WoS
FullText
FullText_BOKU
** Plappert, SF; Liebner, FW; Konnerth, J; Nedelec, JM Anisotropic nanocellulose gel-membranes for drug delivery: Tailoring structure and interface by sequential periodate-chlorite oxidation.
CARBOHYD POLYM. 2019; 226, UNSP 115306 WoS PubMed FullText FullText_BOKU** Rindler, A; Hansmann, C; Konnerth, J The effect of moisture on the mechanical response of wood, adhesive and their interphase by means of nanoindentation.
WOOD SCI TECHNOL. 2019; 53(4): 729-746.
WoS
FullText
FullText_BOKU
** Rindler, A; Vay, O; Hansmann, C; Konnerth, J Adhesive-related warping of thin wooden bi-layers.
WOOD SCI TECHNOL. 2019; 53(5): 1015-1033.
WoS
FullText
FullText_BOKU
** Shah, DU; Konnerth, J; Ramage, MH; Gusenbauer, C Mapping thermal conductivity across bamboo cell walls with scanning thermal microscopy.
SCI REP-UK. 2019; 9, 16667
WoS
PubMed
FullText
FullText_BOKU
** SOlt, P; Konnerth, J; Gindl-Altmutter, W; Kantner, W; Moser, J; Mitter, R; van Herwijnen, HWG Technological performance of formaldehyde-free adhesive alternatives for particleboard industry.
INT J ADHES ADHES. 2019; 94: 99-131.
WoS
FullText
FullText_BOKU
** Solt, P; van Herwijnen, HWG; Konnerth, J Thermoplastic and moisture-dependent behavior of lignin phenol formaldehyde resins.
J APPL POLYM SCI. 2019; 136(40), 48011
WoS
FullText
FullText_BOKU
PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Averina, E; van Herwijnen, HWG; Konnerth, J;
(2019): Wood adhesives based on domestic plant proteins.
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]
Bliem, P; Frömel-Frybort, S; Gartner, C; Konnerth, J; Mauritz, R; van Herwijnen, HWG;
(2019): Optimisation of drying and curing parameters of PF impregnated wood.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]
Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Krenke, T; Mauritz, R; Konnerth, J;
(2019): Engineering of material properties by adhesive selection at the example of a novel structural wood material.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]
Bliem, P; Gartner, C; Konnerth, J; Solt, P; Mauritz, R; van Herwijnen, HWG;
(2019): Knowledge-based Curing of Phenolic Wood Adhesives. .
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]
Budjav, E; Ghorbani, M; Konnerth, J; Mitterer, C; Unterweger, C; Rigacci, A; Ilbizian, P; Rennhofer, H; Lichtenegger, H; Bernstorff, S; Liebner, F
(2019): Thermal superinsulating monolithic lignin-phenol-formaldehyde aerogels and carbon aerogels of high internal surface
.
[Poster]
[1st International Lignin Symposium, Sapporo, Japan, 13.09.2019 - 15.09.2019]
Claudia Gusenbauer, Tiina Nypelö, Etienne Cabane, Johannes Konnerth
(2019): Force Microscopy to reveal chemical properties of lignocellulosic materials up to the nanometer scale .
[The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC), Tokyo, Japan, 09.09.2019 - 11.09.2019]
Elfriede Hogger, Hendrikus W. G. van Herwijnen, Wolfgang Kantner, Johann Moser, Johannes Konnerth
(2019): The importance of cold tack of urea formaldehyde in plywood production.
[15th Annual Meeting of the Northern European Network for Wood Science and Engineering, WSE , Lund, Sweden, 09.10.2019 - 10.10.2019]
Konnerth, J; Colson, J; Pettersson, T; Nypelö, T; Sixta, H; Shirin, A; Kneidinger, G; Gusenbauer, C;
(2019): Surface and adhesion properties of lignocellulosic model fibers..
[The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC), Tokyo, Japan, 09.09.2019 - 11.09.2019]
Rindler, A; Vay, O; Hansmann, C; Konnerth, J;
(2019): Adhesive related warping of thin wooden bi-layers.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]
Sailer-Kronlachner, W; Thoma, C; Solt, P; Konnerth, J; van Herwijnen, HWG;
(2019): Development of novel carbohydrate-based binders for wood composites.
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]
Thoma, C.; Sailer-Kronlachner, W.; Solt, P.; Konnerth, J.; van Herwijnen, H.W.G.
(2019): Hydroxymethylfurfural: Production and application in binder-systems.
[Poster]
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]
Thoma, C; Sailer-Kronlachner, W; Solt, P; Konnerth, J; van Herwijnen, HWG;
(2019): Hydroxymethylfurfural: production and application in binder-systems.
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]
Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U;
(2019): Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers II: Electrical properties. .
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]
Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U;
(2019): Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers I: Mechanical properties.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]
2018
Originalbeitrag in Fachzeitschrift
** Bliem, P; van Herwijnen, HWG; Riegler, M; Konnerth, J Investigation of important influencing factors on the tensile shear strength of two component polyurethane with distinct foaming behaviour.
INT J ADHES ADHES. 2018; 84: 343-349. WoS FullText FullText_BOKU** Bockel, S; Mayer, I; Konnerth, J; Niemz, P; Swaboda, C; Beyer, M; Harling, S; Weiland, G; Bieri, N; Pichelin, F Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding.
J ADHESION. 2018; 94(10): 829-845. WoS FullText FullText_BOKU** Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelo, T; Mautner, A; Konnerth, J Adhesion properties of regenerated lignocellulosic fibres towards poly (lactic acid) microspheres assessed by colloidal probe technique.
J COLLOID INTERF SCI. 2018; 532: 819-829.
WoS
PubMed
FullText
FullText_BOKU
** Ghorbani, M; Konnerth, J; van Herwijnen, HWG; Zinovyev, G; Budjav, E; Silva, AR; Liebner, F Commercial lignosulfonates from different sulfite processes as partial phenol replacement in PF resole resins.
J APPL POLYM SCI. 2018; 135(8): WoS FullText FullText_BOKU** Ghorbani, M; Liebner, F; van Herwijnen, HWG; Solt, P; Konnerth, J Ligneous resole adhesives for exterior-grade plywood.
EUR J WOOD WOOD PROD. 2018; 76(1): 251-258.
WoS
FullText
FullText_BOKU
** Ghorbani, M; Mahendran, AR; van Herwijnen, HWG; Liebner, F; Konnerth, J Paper-based laminates produced with kraft lignin-rich phenol-formaldehyde resoles meet requirements for outdoor usage.
EUR J WOOD WOOD PROD. 2018; 76(2): 481-487. WoS FullText FullText_BOKU** Herzele, S; van Herwijnen, HWG; Edler, M; Gindl-Altmutter, W; Konnerth, J Cell-layer dependent adhesion differences in wood bonds.
COMPOS PART A-APPL S. 2018; 114: 21-29. WoS FullText FullText_BOKU** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Cold tack of urea formaldehyde resins as an important factor in plywood production.
EUR J WOOD WOOD PROD. 2018; 76(5): 1391-1398.
WoS
FullText
FullText_BOKU
** Lutkemeier, B; Konnerth, J; Militz, H Distinctive Impact of Processing Techniques on Bonding Surfaces of Acetylated and Heat-Treated Beech Wood and Its Relation to Bonding Strength.
FOREST PROD J. 2018; 68(4): 372-382. WoS FullText FullText_BOKU** Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T Self-Standing Nanocellulose Janus-Type Films with Aldehyde and Carboxyl Functionalities.
BIOMACROMOLECULES. 2018; 19(3): 973-979. WoS PubMed FullText FullText_BOKU** Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J Conversion of wood-biopolymers into macrofibers with tunable surface energy via dry-jet wet-spinning.
CELLULOSE. 2018; 25(9): 5297-5307.
WoS
PubMed
FullText
FullText_BOKU
** Plappert, SF; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, HC; Liebner, FW Conformal Ultrathin Coating by scCO(2)-Mediated PMMA Deposition: A Facile Approach To Add Moisture Resistance to Lightweight Ordered Nanocellulose Aerogels.
CHEM MATER. 2018; 30(7): 2322-2330. WoS FullText FullText_BOKU** Rindler, A; Poll, C; Hansmann, C; Muller, U; Konnerth, J Moisture related elastic and viscoelastic behaviour of wood adhesives by means of in-situ nanoindentation.
INT J ADHES ADHES. 2018; 85: 123-129. WoS FullText FullText_BOKU** Solt, P; Jaaskelainen, AS; Lingenfelter, P; Konnerth, J; van Herwijnen, HWG Impact of Molecular Weight of Kraft Lignin on Adhesive Performance of Lignin-Based Phenol-Formaldehyde Resins.
FOREST PROD J. 2018; 68(4): 365-371. WoS FullText FullText_BOKU** Solt, P; Rossiger, B; Konnerth, J; van Herwijnen, HWG Lignin Phenol Formaldehyde Resoles Using Base-Catalysed Depolymerized Kraft Lignin.
POLYMERS-BASEL. 2018; 10(10):
WoS
FullText
FullText_BOKU
PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
** Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T
Polysaccharide film as a ductile substrate for gas phase treatment.
[255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water, New Orleans, LA, USA, 18.03.2018 - 22.03.2018]
** Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J
Tunable surface energy wood-biopolymer macrofibers.
[255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water, New Orleans, LA, USA, 18.03.2018 - 22.03.2018]
** Plappert, S; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, FW
Imparting moisture resistance to transparent nematic i-CNF aerogels by scCO2-antisolvent coating of the interior with ultrathin PMMA layers.
[255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water, New Orleans, LA, USA, 18.03.2018 - 22.03.2018]
Bockel, S; Harling, S; Konnerth, J; Niemz, P; Pichelin, F;
(2018): Structural hardwood bonding and the impact of wood accessory
compounds.
[8th Hardwood Conference 2018, Sopron, Hungary, 25.10.2018 - 26.10.2018]
Budjav, E; Requejo-Silva, A; Ghorbani, M; Konnerth, J; Liebner, F
(2018): Thermo-induced gelation of ligneous resole resins: An approach towards mesoporous monolithic aerogels and carbon aerogels.
[Poster]
[1st Vienna Polymer-Group Symposium ViP 2018, Vienna, Austria, 27.02.2018]
Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelö, T; Konnerth, J
(2018): Colloidal probe technique applied to the assessment of adhesion forces between lignocellulosic fibres and polymers.
[16th Conference of the International Association of Colloid and Interface Scientists (IACIS), Rotterdam, Netherlands, 21.05.2018 - 25.05.2018]
Gusenbauer, C; Colson, J; Nypelö, T; Cabane, E; Konnerth, J;
(2018): Chemical Force Microscopy for characterising functionalised renewable materials..
[Wood Nanotechnology Conference 2018, Ascona, Switzerland, 02.09.2018 - 05.09.2018]
Hogger, E; Bauer, K; Höllbacher, E; Gierlinger, N; Konnerth, J; van Herwijnen H W G;
(2018): Monitoring of time dependent ammonia emissions in smoked oak using FTIR spectroscopy..
[8th Hardwood Conference 2018, Sopron, Hungary, 25.10.2018 - 26.10.2018]
Plappert, S; Quraishi, S; Nedelec, J-M; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, F
(2018): Conformal ultrathin coating by scCO2-mediated PMMA deposition: A facile approach to add moisture resistance to lightweigth ordered nanocellulose aerogels.
[Poster]
[1st Vienna Polymer-Group Symposium ViP 2018, Vienna, Austria, 27.02.2018]
2017
Originalbeitrag in Fachzeitschrift
** Colson, J; Andorfer, L; Nypelo, TE; Lutkemeier, B; Stockel, F; Konnerth, J Comparison of silicon and OH-modified AFM tips for adhesion force analysis on functionalised surfaces and natural polymers.
COLLOID SURFACE A. 2017; 529: 363-372. WoS FullText FullText_BOKU** Ghorbani, M; Konnerth, J; Budjav, E; Silva, AR; Zinovyev, G; van Herwijnen, HWG; Edler, M; Griesser, T; Liebner, F Ammoxidized Fenton-Activated Pine Kraft Lignin Accelerates Synthesis and Curing of Resole Resins.
POLYMERS-BASEL. 2017; 9(2):
WoS
FullText
FullText_BOKU
** Winter, A; Andorfer, L; Herzele, S; Zimmermann, T; Saake, B; Edler, M; Griesser, T; Konnerth, J; Gindl-Altmutter, W Reduced polarity and improved dispersion of microfibrillated cellulose in poly(lactic-acid) provided by residual lignin and hemicellulose.
J MATER SCI. 2017; 52(1): 60-72. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
** Budjav, E; Quraishi, S; Ghorbani, M; Konnerth, J; Unterweger, C; Liebner, FW
Synthesis, properties and carbonization of different types of ligneous aerogels.
[253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes, San Francisco, CA, USA, 02.04.2017 - 06.04.2017]
** Nypelo, T; Amer, H; Laine, C; Tammelin, T; Konnerth, J; Henniges, U; Potthast, A; Rosenau, T
Wood-based hemicelluloses as renewable source for functional materials.
[253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes, San Francisco, CA, USA, 02.04.2017 - 06.04.2017]
Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Konnerth, J; Liebner, F
(2017): Thermo-induced gelation of diluted ligneous resole resin pre-condensates in ethylene glycol: A facile approach towards highly open mesoporous monolithic aerogels and carbon aerogels.
[International Conference Renewable Plant Resources 2017 - Chemistry, Technology, Medicine, St. Petersburg, Russian Federation, 18.09.2017 - 22.09.2017]
Herzele, S; van Herwijnen, HWG; Gindl-Altmutter, W; Konnerth, J;
(2017): Local adhesion testing on lignocellulosic fibers with Nanoindentation..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]
Hogger, E; Konnerth, J; van Herwijnen, HWG;
(2017): Influencing Factors On The Cold Tack Of Urea Formaldehyde Used For Birch Plywood.
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]
Hogger, E; van Herwijnen, H. W. G; Moser, J; Kantner, W; Konnerth, J;
(2017): Analysis of the cold tack of urea formaldehyde resin as an important factor in birch plywood production. .
[International Panel Products Symposium (IPPS), Llandudno, UK, 04.10.2017 - 05.10.2017]
Konnerth, J; Colson, J; Kneidinger, G; Asaadi, S; Sixta, H; Gindl-Altmutter, W; Nypelö, TE;
(2017): Comparison of direct adhesion of thermoplastic polymers to lignocellulosic model fibers..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]
Rindler, A; Hansmann, C; Müller, U; Konnerth, J
(2017): Dimensional stability of wood based panels - Contibutions of the adhesive
.
[IUFRO Division 5 Conference, SWST 60th International Convention 2017, Vancouver, BC, Canada, 12.06.2017 - 16.06.2017]
Rindler, A; Konnerth, J; Hansmann, C; Müller, U
(2017): Mechanical contribution of the adhesive layer to the dimensional stability of multi-layered wood based panels. .
[CompWood 2017, Vienna, Austria, 02.06.2017 - 07.06.2017]
Rindler, A; Konnerth, J; Müller, U
(2017): Dimensional stability – Contributions of the adhesive layer.
[IUFRO Division 5 Conference, SWST 60th International Convention 2017, Vancouver, BC, Canada, 12.06.2017 - 16.06.2017]
Solt, P; Konnerth, J; van Herwijnen, HWG;
(2017): The impact of molecular weight of Kraft-lignin on adhesive performance of lignin based phenol formaldehyde resins..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]
Solt, P; Libowitzky, S; van Herwijnen, HWG; Konnerth, J;
(2017): Effect of pressing temperature and moisture content on the curing properties of pMDI.
[Poster]
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]
van Herwijnen, HWG; Solt, P; Gindl-Altmutter, W; Konnerth, J;
(2017): Comparable technological evaluation of formaldehyde-free adhesives for the particle board production..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]
2016
Originalbeitrag in Fachzeitschrift
** Ghorbani, M; Liebner, F; van Herwijnen, HWG; Pfungen, L; Krahofer, M; Budjav, E; Konnerth, J Lignin Phenol Formaldehyde Resoles: The Impact of Lignin Type on Adhesive Properties.
BIORESOURCES. 2016; 11(3): 6727-6741. WoS FullText FullText_BOKU** Konnerth, J; Kluge, M; Schweizer, G; Miljkovic, M; Gindl-Altmutter, W Survey of selected adhesive bonding properties of nine European softwood and hardwood species.
EUR J WOOD WOOD PROD. 2016; 74(6): 809-819. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
** Konnerth, J; Ghorbani, M; Van Herwijnen, H; Budjav, E; Liebner, FW Performance of lignin-phenol-formaldehyde adhesives using various lignin sources.
ABSTR PAP AM CHEM S. 2016; 251: WoS** Nypelo, T; Laine, C; Henniges, U; Konnerth, J; Tammelin, T Structure-property relation established by chemical mapping of cellulose nanofibril films containing renewable additives.
ABSTR PAP AM CHEM S. 2016; 251: WoS
Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Liebner, F
(2016): Step-reaction vs. chain-reaction polymerization of lignin: two facile approaches towards lignin aerogels and carbon aerogels.
[3rd International Aerogel Seminar, Sophia Antipolis, France, 22.09.2016 - 23.09.2016]
Budjav, E; Requejo, A; Ghorbani, M; Konnerth, J; Liebner, F
(2016): Thermo-induced gelation of ligneous resole resin pre-condensates in ethylene glycol: An approach towards mesoporous monolithic aerogels of high internal surface.
[Poster]
[14th European Workshop on Lignocellulosics and Pulp, Autrans, France, 28.06.2016 - 01.06.2016]
Ghorbani, M; Liebner, F; van Herwijnen, E; Konnerth, J
(2016): Lignin phenol formaldehyde resole resin: Synthesis and characteristics.
[4th Symposium on Biotechnology applied to Lignocelluloses, Madrid, Spain, 19.06.2016 - 22.06.2016]
Grüll, G; Wegscheider, A; Konnerth, J; Teischinger, A; Neumüller, A
(2016): Planing quality of glulam lamellae and its impact on bonding quality and fracture surface characteristics.
[World Conference on Timber Engineering WCTE 2016, Vienna, Austria, 22.08.2016 - 25.08.2016]
Konnerth, J; Ghorbani, M; Van Herwijnen, E; Budjav, E; Liebner, F;
(2016): Performance of Lignin-Phenol-Formaldehyde Adhesives using various Lignin sources.
[American Chemical Society, 251st National Meeting, San Diego, CA, USA, 13.03.2016 - 17.03.2016]
Lütkemeier, B.; Konnerth, J.; Militz, H.
(2016): Bonding performance of modified wood - distinctive influence of plasma pre-treatments on bonding strength.
[World Conference on Timber Engineering WCTE 2016, Vienna, Austria, 22.08.2016 - 25.08.2016]
Mueller, U; Vay, O; Martinez-Conde, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A
(2016): Converting wood into timber and particles - new approaches .
[World Conference on Timber Engineering WCTE 2016, Vienna, Austria, 22.08.2016 - 25.08.2016]
Nypelö, T; Andorfer, L; Konnerth, J
(2016): Adhesion force measurements applied to wood-based materials.
[Poster]
[14th European Workshop on Lignocellulosics and Pulp, Autrans, France, 28.06.2016 - 01.06.2016]
Nypelö, T; Andorfer, L; Konnerth, J
(2016): AFM adhesion force measurements applied to wood-based materials I.
[Poster]
[IX Iberoamerican Congress on Pulp and Paper Research "Building bridges in research and innovation for the sustainable bioeconomy" September 4-8, 2016, Espoo, Finland, 04.09.2016 - 08.09.2016]
Nypelö, T; Laine, C; Henniges, U; Konnerth, J; Tammelin, T
(2016): Structure-property relation of films of cellulose nanofibrils containing renewable additives established by chemical mapping.
[251st National Spring Meeting of the American Chemical Society ACS 2016, San Diego, CA, USA, 13.03.2016 - 17.03.2016]
2015
Originalbeitrag in Fachzeitschrift
** Müller, U; Gindl-Altmutter, W; Konnerth, J; Maier, GA; Keckes, J; Synergy of multi-scale toughening and protective mechanisms at hierarchical branch-stem interfaces..
Sci Rep. 2015; 5:14522
WoS
PubMed
FullText
FullText_BOKU
* Müller, U; Vay, O; Martinez-Conde Lopez, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A (2015): Innovative mechanische Trenntechnologien von Holz.
Holztechnologie, 56, 29-34; ISSN 0018-3881PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Ghorbani, M; Liebner, F; Van Herwijnen, E; Pfungen, L; Krahofer, M; Konnerth, J;
(2015): Synthesis and Characteristics of Lignin-Phenol-Formaldehyde Resole Adhesives. , Sept. 09-11, Vienna, Austria.
[Poster]
[18th International Symposium on Wood, Fiber and Pulping Chemistry ISWFPC 2015, Vienna, Austria, 09.09.2015 - 11.09.2015]
Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J. Teischinger, A.
(2015): Neue Wege im mechanischen Holzaufschluss - alternative Technologien, Energieeinsparung und Ressourceneffizienz
.
[Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien, Regensburg, Germany, 12.11.2015]
2014
Originalbeitrag in Fachzeitschrift
** Ammann, S; Obersriebnig, M; Konnerth, J; Gindl-Altmutter, W; Niemz, P Comparative adhesion analysis at glue joints in European beech and Norway spruce wood by means of nanoindentation.
INT J ADHES ADHES. 2014; 50: 45-49. WoS FullText FullText_BOKU** Beaugrand, J; Nottez, M; Konnerth, J; Bourmaud, A Multi-scale analysis of the structure and mechanical performance of woody hemp core and the dependence on the sampling location.
IND CROP PROD. 2014; 60: 193-204. WoS FullText FullText_BOKU** Frybort, S; Obersriebnig, M; Muller, U; Gindl-Altmutter, W; Konnerth, J Variability in surface polarity of wood by means of AFM adhesion force mapping.
COLLOID SURFACE A. 2014; 457: 82-87. WoS FullText FullText_BOKU** Keplinger, T; Konnerth, J; Aguie-Beghin, V; Ruggeberg, M; Gierlinger, N; Burgert, I A zoom into the nanoscale texture of secondary cell walls.
PLANT METHODS. 2014; 10:
WoS
PubMed
FullText
FullText_BOKU
** Konnerth, J; Weigl, M; Gindl-Altmutter, W; Avramidis, G; Wolkenhauer, A; Viol, W; Gilge, M; Obersriebnig, M Effect of plasma treatment on cell-wall adhesion of urea-formaldehyde resin revealed by nanoindentation.
HOLZFORSCHUNG. 2014; 68(6): 707-712. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A.,
(2014): Innovative Trenn- und Aufteiltechnologien.
[16. Holztechnologisches Kolloquium, Dresden, Dresden, Germany, 03.04.2014 - 04.04.2014]
U. Müller, J. Konnerth, W. Gindl-Altmutter, D. Kaserer, J. Keckes
(2014): Stamm-Astanbindung – eine biologisch optimierte Struktur mit hoher mechanischer Leistungsfähigkeit.
[Grazer Holzbau-Fachtagung - GraHFT 2014, Graz, Austria, 26.09.2014]
Vay, O., Konnerth, J., Frybort, S., Krenke, T., Teischinger, A., Müller, U.
(2014): Cross industry Innovation process to identify "new" Technologies for mechanical Wood disintegration.
[Poster]
[57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
2013
Originalbeitrag in Fachzeitschrift
** Obersriebnig, M; Konnerth, J; Gindl-Altmutter, W Evaluating fundamental position-dependent differences in wood cell wall adhesion using nanoindentation.
INT J ADHES ADHES. 2013; 40: 129-134. WoS FullText FullText_BOKU** Stoeckel, F; Konnerth, J; Gindl-Altmutter, W Mechanical properties of adhesives for bonding wood-A review.
INT J ADHES ADHES. 2013; 45: 32-41. WoS FullText FullText_BOKU** Vay, O; Obersriebnig, M; Muller, U; Konnerth, J; Gindl-Altmutter, W Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM).
HOLZFORSCHUNG. 2013; 67(2): 155-159. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Konnerth, J; Obersriebnig, M; Frybort, S; Gindl-Altmutter, W;
(2013): Nanoindentation for direct evaluation of adhesion at the cell wall-adhesive interface & AFM-based polarity characterization of wood surfaces.
[Int. Conference on Wood Adhesives, Toronto, Ontario, Canada, 09.10.2013 - 11.10.2013]
2012
Originalbeitrag in Fachzeitschrift
** Gindl-Altmutter, W; Muller, U; Konnerth, J The significance of lap-shear testing of wood adhesive bonds by means of Volkersen's shear lag model.
EUR J WOOD WOOD PROD. 2012; 70(6): 903-905. WoS FullText FullText_BOKU** Konnerth, J; Muller, U; Gindl, W; Buksnowitz, C Reliability of wood adhesive bonds in a 50 year old glider construction.
EUR J WOOD WOOD PROD. 2012; 70(1-3): 381-384. WoS FullText FullText_BOKU** Obersriebnig, M; Veigel, S; Gindl-Altmutter, W; Konnerth, J Determination of adhesive energy at the wood cell-wall/UF interface by nanoindentation (NI).
HOLZFORSCHUNG. 2012; 66(6): 781-787. WoS FullText FullText_BOKU** Rathke, J; Muller, U; Konnerth, J; Sinn, G Strain Measurements within Fibreboard. Part III: Analyzing the Process Zone at the Crack Tip of Medium Density Fiberboards (MDF) Double Cantilever I-Beam Specimens.
MATERIALS. 2012; 5(11): 2190-2204. WoS FullText FullText_BOKU** Rathke, J; Sinn, G; Konnerth, J; Muller, U Strain Measurements within Fiber Boards. Part I: Inhomogeneous Strain Distribution within Medium Density Fiberboards (MDF) Loaded Perpendicularly to the Plane of the Board.
MATERIALS. 2012; 5(6): 1115-1124. WoS FullText FullText_BOKU** Sinn, G; Muller, U; Konnerth, J; Rathke, J Strain Measurements within Fibre Boards. Part II: Strain Concentrations at the Crack Tip of MDF Specimens Tested by the Wedge Splitting Method.
MATERIALS. 2012; 5(8): 1495-1507. WoS FullText FullText_BOKU** Stockel, F; Konnerth, J; Moser, J; Kantner, W; Gindl-Altmutter, W Micromechanical properties of the interphase in pMDI and UF bond lines.
WOOD SCI TECHNOL. 2012; 46(4): 611-620. WoS FullText FullText_BOKUHabilitationsschrift
Johannes Konnerth (2012): Mechanical characteristics of Wood Adhesive Bonds.
, 194; Universität für Bodenkultur Wien; Habilitation im Fach Wood Material Science2011
Originalbeitrag in Fachzeitschrift
** Jager, A; Hofstetter, K; Buksnowitz, C; Gindl-Altmutter, W; Konnerth, J Identification of stiffness tensor components of wood cell walls by means of nanoindentation.
COMPOS PART A-APPL S. 2011; 42(12): 2101-2109. WoS FullText FullText_BOKU** Valla, A; Konnerth, J; Keunecke, D; Niemz, P; Muller, U; Gindl, W Comparison of two optical methods for contactless, full field and highly sensitive in-plane deformation measurements using the example of plywood.
WOOD SCI TECHNOL. 2011; 45(4): 755-765. WoS FullText FullText_BOKU* Hansmann, C; Konnerth, J; Rosner, S (2011): Digital image analysis of radial shrinkage of fresh spruce (Picea abies L.) wood..
Wood Mater Sci Eng. 2011; 6(1-2):2-6
PubMed
FullText
FullText_BOKU
2010
** Buksnowitz, C; Hackspiel, C; Hofstetter, K; Muller, U; Gindl, W; Teischinger, A; Konnerth, J Knots in trees: strain distribution in a naturally optimised structure.
WOOD SCI TECHNOL. 2010; 44(3): 389-398. WoS FullText FullText_BOKU** Follrich, J; Stockel, F; Konnerth, J Macro- and micromechanical characterization of wood-adhesive bonds exposed to alternating climate conditions.
HOLZFORSCHUNG. 2010; 64(6): 705-711. WoS FullText FullText_BOKU** Gierlinger, N; Luss, S; König, C; Konnerth, J; Eder, M; Fratzl, P Cellulose microfibril orientation of Picea abies and its variability at the micron-level determined by Raman imaging..
J Exp Bot. 2010; 61(2):587-595
WoS
PubMed
FullText
FullText_BOKU
** Gindl, W; Emsenhuber, G; Plackner, J; Konnerth, J; Keckes, J; Converse piezoelectric effect in cellulose I revealed by wide-angle X-ray diffraction..
Biomacromolecules. 2010; 11(5):1281-1285 WoS PubMed FullText FullText_BOKU** Konnerth, J; Eiser, M; Jager, A; Bader, TK; Hofstetter, K; Follrich, J; Ters, T; Hansmann, C; Wimmer, R Macro- and micro-mechanical properties of red oak wood (Quercus rubra L.) treated with hemicellulases.
HOLZFORSCHUNG. 2010; 64(4): 447-453. WoS FullText FullText_BOKU** Konnerth, J; Stockel, F; Muller, U; Gindl, W Elastic Properties of Adhesive Polymers. III. Adhesive Polymer Films Under Dry and Wet Conditions Characterized by Means of Nanoindentation.
J APPL POLYM SCI. 2010; 118(3): 1331-1334. WoS FullText FullText_BOKU** Rosner, S; Konnerth, J; Plank, B; Salaberger, D; Hansmann, C Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood.
TREES-STRUCT FUNCT. 2010; 24(5): 931-940.
WoS
PubMed
FullText
FullText_BOKU
** Stockel, F; Konnerth, J; Kantner, W; Moser, J; Gindl, W Tensile shear strength of UF- and MUF-bonded veneer related to data of adhesives and cell walls measured by nanoindentation.
HOLZFORSCHUNG. 2010; 64(3): 337-342. WoS FullText FullText_BOKU** Stockel, F; Konnerth, J; Kantner, W; Moser, J; Gindl, W Mechanical characterisation of adhesives in particle boards by means of nanoindentation.
EUR J WOOD WOOD PROD. 2010; 68(4): 421-426. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Christoph Buksnowitz, Ulrich Müller, Wolfgang Gindl, Johannes Konnerth
(2010): Strain distributions around knots in Picea abies (L.) boards subjected to tensile load..
[Poster]
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]
Hansmann C., Konnerth J., Rosner S.
(2010): Digital image analysis of radial shrinkage of fresh Norway spruce wood.
[11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying, Skelleftea, Sweden, 18.01.2010 - 22.01.2010]
Johannes Konnerth, Ulrich Müller, Wolfgang Gindl, Christoph Buksnowitz
(2010): Strain distribution in a spruce branch-stem junction.
[Poster]
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]
Konnerth Johannes, Eiser Martina, Jäger Andreas, Wimmer Rupert
(2010): Macro- and micromechanical properties of red oak wood after selective removal of hemicelluloses..
[Poster]
[Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future., Geneva, Switzerland, 11.10.2010 - 15.10.2010]
Konnerth Johannes
Buksnowitz Christoph
Gindl-Altmutter Wolfgang
Hofstetter Karin
Jäger Andreas
(2010): Full set of elastic constants of spruce wood cell walls determined by Nanoindentation..
[Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future., Geneva, Switzerland, 11.10.2010 - 15.10.2010]
Rosner S., Konnerth J., Hansmann C.
(2010): Acoustic emissions and radial shrinkage behavior of fresh versus pre-dried Norway spruce sapwood.
[11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying, Skelleftea, Sweden, 18.01.2010 - 22.01.2010]
Teischinger, A., Müller, U., Konnerth, J.
(2010): Possibilities and limits of wood-fibre based composites.
[8th Global WPC and Natural Fibre Composites Congress and Exihibition, Stuttgart, Germany, 22.06.2010 - 23.06.2010]
Veigel, S. , Müller, U., Konnerth, J., Gindl, W.
(2010): Cellulose fibers and nanofibrils for adhesive reinforcement.
[International Conference on Nanotechnology for the Forest Products Industry, Espoo, Finland, 27.09.2010]
2009
Originalbeitrag in Fachzeitschrift
** Konnerth, J; Gierlinger, N; Keckes, J; Gindl, W Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle.
J MATER SCI. 2009; 44(16): 4399-4406. WoS FullText FullText_BOKU** Konnerth, J; Hahn, G; Gindl, W Feasibility of particle board production using bone glue.
EUR J WOOD WOOD PROD. 2009; 67(2): 243-245. WoS FullText FullText_BOKU** Rosner, S; Karlsson, B; Konnerth, J; Hansmann, C; Shrinkage processes in standard-size Norway spruce wood specimens with different vulnerability to cavitation..
Tree Physiol. 2009; 29(11):1419-1431
WoS
PubMed
FullText
FullText_BOKU
PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Konnerth J
Gindl W
(2009): Nanoindentation for characterisation of wood-adhesive bonds.
[Poster]
[International Conference on Wood Adhesives ICWA 2009, Lake Tahoe, NV, USA, 28.09.2009 - 30.09.2009]
2008
Originalbeitrag in Fachzeitschrift
** Konnerth, J; Gindl, W Observation of the influence of temperature on the mechanical properties of wood adhesives by nanoindentation.
HOLZFORSCHUNG. 2008; 62(6): 714-717. WoS FullText FullText_BOKU** Konnerth, J; Harper, D; Lee, SH; Rials, TG; Gindl, W Adhesive penetration of wood cell walls investigated by scanning thermal microscopy (SThM).
HOLZFORSCHUNG. 2008; 62(1): 91-98. WoS FullText FullText_BOKURosner, S; Karlsson, B; Konnerth, J; Hansmann, C (2008): Acoustic emissions related to the dehydration stress behavior of green Norway spruce wood.
J ACOUSTIC EMISSION, 26, 14-22; ISSN 0730-0050PUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Rosner S., Karlsson B., Konnerth J., Hansmann C.
(2008): Information potential of acoustic emissions on the dehydration behavior of wood.
[28th European Conference on Acoustic Emission Testing 2008, Krakow, Poland, 17.09.2008 - 19.09.2008]
2007
Originalbeitrag in Fachzeitschrift
** Konnerth, J., Gindl, W., Müller, U. Elastic properties of adhesive polymers. Part I: polymer films by means of electronic speckle pattern interferometry.
Journal of Applied Polymer Science, 103, 3936-3939 WoS FullText FullText_BOKU** Konnerth, J; Valla, A; Gindl, W Nanoindentation mapping of a wood-adhesive bond.
APPL PHYS A-MAT SCI PROCESS. 2007; 88(2): 371-375. WoS FullText FullText_BOKUPUBLIZIERTER Beitrag für wissenschaftliche Veranstaltung
Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W
(2007): Wood adhesive bondlines by Nanoindentation.
[13th International Conference on Experimental Mechanics 2007, Alexandroupolis, Greece, 01.07.2007 - 06.07.2007]
Konnerth J, Rials TG, Harper D, Lee S-H, Gindl W
(2007): Scanning Thermal Microscopy in wood adhesive bondlines.
[9th International Conference on Wood & Biofiber Plastic Composites, Madison, WI, USA, 21.05.2007 - 23.05.2007]
Dissertation
Johannes Konnerth (2007): Mechanische Analyse von Holz-Klebstoff Verbindungen.
, 89; Universität für Bodenkultur Wien2006
Originalbeitrag in Fachzeitschrift
** Gindl, W., Konnerth, J., Schöberl, T. Nanoindentation of regenerated cellulose fibres.
Cellulose, 13, 1-7 WoS FullText FullText_BOKU** Konnerth, J., Gindl, W. The interphase in wood-adhesive bond lines by nanoindentation.
Holzforschung, 60, 429-433 WoS FullText FullText_BOKU** Konnerth, J., Gindl, W., Harm, M., Müller, U. Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf- and lap joint testing method.
Holz als Roh- und Werkstoff, 64, 269-271 WoS FullText FullText_BOKU** Konnerth, J., Jäger, A., Eberhardsteiner, J., Müller, U., Gindl, W. Elastic properties of adhesive polymers. Part II: Polymer films and bond lines by means of nanoindentation.
Journal of Applied Polymer Science, 102, 2, 1234-1239 WoS FullText FullText_BOKU** Konnerth, J., Valla, A., Gindl, W., Müller, U. Measurement of strain distribution in timber finger joints.
WOOD SCI TECHNOL, 40, 631-636; ISSN 0043-7719 WoS FullText FullText_BOKU