University of Natural Resources and Life Sciences, Vienna (BOKU) - Research portal
Müller Ulrich
>> Transfer of Knowledge
** = Publications listed in SCI/SSCI - Journals (published in Web of Science)
* = peer-reviewed publication (not listed in SCI/SSCI)
Only: Full paper/article, Review, Proceedings Paper
= Open Access - Publications
2023
Journal Articles
** Al-musawi, H; Manni, E; Stadlmann, A; Ungerer, B; Vand, MH; Lahayne, O; Nobile, R; Baumann, G; Feist, F; Muller, U Characterisation of thermally treated beech and birch by means of quasi-static tests and ultrasonic waves.
SCI REP-UK. 2023; 13(1):
WoS
PubMed
FullText
FullText_BOKU
** Kumpenza, C; Pramreiter, M; Nenning, TJ; Bliem, P; Reiterer, R; Konnerth, J; Muller, U Temperature-related tensile modulus of polymer-based adhesive films.
J ADHESION. 2023; 99(2): 259-276. WoS FullText FullText_BOKU2022
** Jakob, M; Czabany, I; Veigel, S; Muller, U; Gindl-Altmutter, W Comparing the suitability of domestic spruce, beech, and poplar wood for high-strength densified wood.
EUR J WOOD WOOD PROD. 2022; 80(4): 859-876. WoS FullText FullText_BOKU** Jakob, M; Mahendran, AR; Gindl-Altmutter, W; Bliem, P; Konnerth, J; Muller, U; Veigel, S The strength and stiffness of oriented wood and cellulose-fibre materials: A review.
PROG MATER SCI. 2022; 125, 100916 WoS FullText FullText_BOKU** Karr, U; Fitzka, M; Schonbauer, BM; Krenke, T; Muller, U; Mayer, H Fatigue testing of wood up to one billion load cycles.
HOLZFORSCHUNG. 2022; 76(11-12): 977-984. WoS FullText FullText_BOKU** Schonbauer, BM; Killinger, M; Karr, U; Fitzka, M; Muller, U; Teischinger, A; Mayer, H Fatigue properties of wood at different load ratios tested at 50 Hz and 20 kHz.
MATERIALWISS WERKST. 2022; 53(3): 344-354. WoS FullText FullText_BOKU** Ungerer, B; Muller, U; Pramreiter, M; Acero, EH; Veigel, S Influence of yarn structure and coating on the mechanical performance of continuous viscose fiber/epoxy composites.
POLYM COMPOSITE. 2022; 43(2): 1012-1021. WoS FullText FullText_BOKUChapter in Collected Volumes
Ulrich Müller (2022): Aktuelle Entwicklungen der Werkstofftechnik Holz.
In: Philipp Assinger, Betriebliche Bildung in der Holzwirtschaft - Digitalisierung und Kompetenzvalidierung, 136; wbv Media GmbH & Co. KG, Bielefeld; ISBN 978-3-7639-7052-0 FullText2021
Journal Articles
** Baumann, G; Brandner, R; Muller, U; Stadlmann, A; Feist, F A Comparative Study on the Temperature Effect of Solid Birch Wood and Solid Beech Wood under Impact Loading.
MATERIALS. 2021; 14(24), 7616
WoS
PubMed
FullText
FullText_BOKU
** Frybort, S; Bliem, P; Moseler, B; Krenke, T; Mauritz, R; Muller, U Influence of disintegration technologies on particle structure and its mechanical properties.
WOOD MATER SCI ENG. 2021; 16(3): 204-210. WoS FullText FullText_BOKU** Pramreiter, M; Bodner, SC; Keckes, J; Stadlmann, A; Feist, F; Baumann, G; Maawad, E; Muller, U Predicting strength of Finnish birch veneers based on three different failure criteria.
HOLZFORSCHUNG. 2021; 75(9): 847-856. WoS FullText FullText_BOKU** Pramreiter, M; Stadlmann, A; Huber, C; Konnerth, J; Halbauer, P; Baumann, G; Muller, U The Influence of Thickness on the Tensile Strength of Finnish Birch Veneers under Varying Load Angles.
FORESTS. 2021; 12(1), 87
WoS
FullText
FullText_BOKU
** Ungerer, B; Muller, U; Potthast, A; Acero, EH; Veigel, S Chemical and physical interactions of regenerated cellulose yarns and isocyanate-based matrix systems.
SCI REP-UK. 2021; 11(1), 11647
WoS
PubMed
FullText
FullText_BOKU
** Ungerer, B; Muller, U; Potthast, A; Acero, EH; Veigel, S Chemical and physical interactions of regenerated cellulose yarns and isocyanate-based matrix systems.
SCI REP-UK. 2021; 11(1), 11647
WoS
FullText
FullText_BOKU
* Maximilian Pramreiter, Sabine C Bodner, Jozef Keckes, Alexander Stadlmann, Johannes Konnerth, Florian Feist, Georg Baumann, Christian Huber, Ulrich Müller (2021): Zerstörungsfreie Charakterisierung von Furnieren für strukturelle Verbundwerkstoffe - Evaluierung von Methoden und Einflussfaktoren.
Holztechnologie, 62 (1), 5-18; ISSN 0018-3881Conference & Workshop Proceedings, Paper, Abstract
Konnerth, J; Huber, C; Bliem, P; Obernosterer, D; Solt-Rindler, P; Jeitler, G; Grabner, M; Müller, U; van Herwijnen, H; Pramreiter, M;
(2021): Opportunities and challenges coming with hardwood use for structural applications.
[9th Hardwood Conference 2021, Sopron, Hungary, 24.06.2021 - 25.06.2021]
Chapter in Collected Volumes
Ulrich Müller, Alfred Teischinger (2021): Connections in wood and material efficiency: Wood Formation Follows Mechanical Load.
In: Edition Angewandte – Book series of the University of Applied Arts Vienna. Edited by Gerald Bast. Lukas Allner, Christoph Kaltenbrunner, Daniela Kröhnert, Philipp Reinsberg, Institute of Architecture at the University of Applied Arts Vienna, and Institute of Art Sciences and Art Education at the University of Applied Arts Vienna , CONCEPTUAL JOINING - WOOD STRUCTURES FROM DETAIL TO UTOPIA, 30-38; Birkhäuser , Basel; ISBN 978-3-0356-2437-3 FullText2020
Journal Articles
** Baumann, G; Brandner, R; Muller, U; Kumpenza, C; Stadlmann, A; Feist, F Temperature-Related Properties of Solid Birch Wood under Quasi-Static and Dynamic Bending.
MATERIALS. 2020; 13(23), 5518
WoS
PubMed
FullText
FullText_BOKU
** Jakob, M; Stemmer, G; Czabany, I; Muller, U; Gindl-Altmutter, W Preparation of High Strength Plywood from Partially Delignified Densified Wood.
POLYMERS-BASEL. 2020; 12(8), 1796
WoS
PubMed
FullText
FullText_BOKU
** Kumpenza, C; Ringhofer, A; Krenke, T; Sotayo, A; Pramreiter, M; Muller, U Timber Screw Connection: Study of the Strain along the Interface Using Optical Measurement Techniques and Simulations.
BIORESOURCES. 2020; 15(2): 3859-3873.
WoS
FullText
FullText_BOKU
** Muller, U; Jost, T; Kurzbock, C; Stadlmann, A; Wagner, W; Kirschbichler, S; Baumann, G; Feist, F Crash simulation of wood and composite wood for future automotive engineering.
WOOD MATER SCI ENG. 2020; 15(5): 312-324. WoS FullText FullText_BOKU** Muller, U; Jost, T; Kurzbock, C; Stadlmann, A; Wagner, W; Kirschbichler, S; Baumann, G; Feist, F; Pramreiter, M Crash simulation of wood and composite wood for future automotive engineering (10.1080/17480272.2019.1665581, 2019).
WOOD MATER SCI ENG. 2020; 15(5): I-I.
WoS
FullText
FullText_BOKU
** Pramreiter, M; Bodner, SC; Keckes, J; Stadlmann, A; Kumpenza, C; Muller, U Influence of Fiber Deviation on Strength of Thin Birch (Betula pendula Roth.) Veneers.
MATERIALS. 2020; 13(7):
WoS
PubMed
FullText
FullText_BOKU
** Pramreiter, M; Rohner, M; Kumpenza, C; Ungerer, B; Stadlmann, A; Keckes, J; Muller, U Energy-absorbing wood composite for improved damage tolerance inspired by mollusc shells.
MATER RES EXPRESS. 2020; 7(9), 095101
WoS
FullText
FullText_BOKU
** Pramreiter, M; Stadlmann, A; Linkeseder, F; Keckes, J; Muller, U Non-destructive Testing of Thin Birch (Betula pendula Roth.) Veneers.
BIORESOURCES. 2020; 15(1): 1265-1281.
WoS
FullText
FullText_BOKU
** Stadlmann, A; Pramreiter, M; Stingl, R; Kurzbock, C; Jost, T; Muller, U Durability of Wood Exposed to Alternating Climate Test and Natural Weathering.
FORESTS. 2020; 11(9), 953
WoS
FullText
FullText_BOKU
** Stadlmann, A; Veigel, S; Dornik, F; Pramreiter, M; Steiner, G; Muller, U Bond Strength of Different Wood-Plastic Hybrid Components Prepared through Back Injection Moulding.
BIORESOURCES. 2020; 15(1): 1050-1061.
WoS
FullText
FullText_BOKU
* Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Mauritz, R; Müller, U; Teischinger, A; Konnerth, J (2020): Holzwerkstoff basierend auf Partikeln hergestellt mittels einer neuartigen, nicht schneidenden Zerteilungstechnologie.
Holztechnologie, 61 (3), 30-38; ISSN 0018-38812019
* Müller, U; Feist, F; Jost, T (2019): Holzverbundwerkstoffe im Automobilbau der Zukunft? .
Holztechnologie, 1, 5-15; ISSN 0018-38812018
** Krenke, T; Frybort, S; Muller, U Cutting force analysis of a linear cutting process of spruce.
WOOD MATER SCI ENG. 2018; 13(5): 279-285. WoS FullText FullText_BOKU** Kumpenza, C; Matz, P; Halbauer, P; Grabner, M; Steiner, G; Feist, F; Muller, U Measuring Poisson's ratio: mechanical characterization of spruce wood by means of non-contact optical gauging techniques.
WOOD SCI TECHNOL. 2018; 52(6): 1451-1471. WoS FullText FullText_BOKU** Muller, U; Gindl-Altmutter, W; Keckes, J How softwood tree branches are attached to stems: hierarchical extension of Shigo's stem-branch model.
TREES-STRUCT FUNCT. 2018; 32(4): 1113-1121. WoS FullText FullText_BOKU** Rindler, A; Poll, C; Hansmann, C; Muller, U; Konnerth, J Moisture related elastic and viscoelastic behaviour of wood adhesives by means of in-situ nanoindentation.
INT J ADHES ADHES. 2018; 85: 123-129. WoS FullText FullText_BOKU** Winter, A; Mundigler, N; Holzweber, J; Veigel, S; Muller, U; Kovalcik, A; Gindl-Altmutter, W Residual wood polymers facilitate compounding of microfibrillated cellulose with poly(lactic acid) for 3D printer filaments.
PHILOS T R SOC A. 2018; 376(2112): WoS PubMed
FullText
FullText_BOKU
* Jost, T; Müller, U; Feist, F (2018): Wood Composites for Future Automotive Engineering? – Basic Requirement: Crash Simulation of Wood-Based Components.
Konstruktion, 10, 74-82; ISSN 0720-5953 FullTextConference & Workshop Proceedings, Paper, Abstract
Kumpenza, C.; Hochwarter, P.; Stadlmann, A.; Stingl, R.; Halbauer, P.; Grabner, M.; Baumann, G.; Feist, F.; Müller, U.
(2018): Joining of Wood-Based Multi-Material Components with Screws and Bolts: Experimental Study of Double-Lap Joints.
[61st International Convention of the Society of Wood Science and Technology and Japan Wood Research Society, Nagoya, Japan, 05.11.2018 - 09.11.2018]
Kurzböck, C.; Jost, T.; Müller, U.; Feist, F.; Hartmann, S.
(2018): WoodC.A.R. – Wood Composites for Functional Vehicle Structures.
[15. Deutsches LS-Dyna Forum 2018, Bamberg, Germany, 15.10.2018 - 17.10.2018]
Müller, U.; Feist, F.; Jost, T.
(2018): Holzverbundwerkstoffe im Automobilbau der Zukunft? – Crashtests und Simulation von Holzwerkstoffen vorausgesetzt!.
[18. Holztechnologisches Kolloquium, Dresden, Germany, 12.04.2018 - 13.04.2018]
2017
Journal Articles
** Krenke, T; Frybort, S; Muller, U Determining cutting force parameters by applying a system function.
MACH SCI TECHNOL. 2017; 21(3): 436-451. WoS FullText FullText_BOKU** Mahrdt, E; van Herwijnen, HWG; Kantner, W; Moser, J; Giesswein, J; Mitter, R; Muller, U; Gindl-Altmutter, W Adhesive distribution related to mechanical performance of high density wood fibre board.
INT J ADHES ADHES. 2017; 78: 23-27. WoS FullText FullText_BOKU** Martinez-Conde, A; Huber, D; Pinkl, S; Mahrdt, E; Teischinger, A; Muller, U Dynamic Compression: A Novel Technique to Reduce Energy Consumption during Wood Fiber Production.
BIORESOURCES. 2017; 12(4): 7376-7394. WoS FullText FullText_BOKU** Martinez-Conde, A; Krenke, T; Frybort, S; Muller, U Review: Comparative analysis of CO2 laser and conventional sawing for cutting of lumber and wood-based materials.
WOOD SCI TECHNOL. 2017; 51(4): 943-966. WoS FullText FullText_BOKU** Rindler, A; Vay, O; Hansmann, C; Muller, U Dimensional stability of multi-layered wood-based panels: a review.
WOOD SCI TECHNOL. 2017; 51(5): 969-996. WoS FullText FullText_BOKUConference & Workshop Proceedings, Paper, Abstract
Müller, U.; Singer, G.; Kirschbichler, S.; Leitgeb, W.; Jost, T.
(2017): The road from creating a material model to a structural component of wood for automotive applications.
[CompWood 2017, Vienna, Austria, 07.06.2017 - 09.06.2017]
Rindler, A; Hansmann, C; Müller, U; Konnerth, J
(2017): Dimensional stability of wood based panels - Contibutions of the adhesive
.
[IUFRO Division 5 Conference, SWST 60th International Convention 2017, Vancouver, BC, Canada, 12.06.2017 - 16.06.2017]
Rindler, A; Konnerth, J; Hansmann, C; Müller, U
(2017): Mechanical contribution of the adhesive layer to the dimensional stability of multi-layered wood based panels. .
[CompWood 2017, Vienna, Austria, 02.06.2017 - 07.06.2017]
Rindler, A; Konnerth, J; Müller, U
(2017): Dimensional stability – Contributions of the adhesive layer.
[IUFRO Division 5 Conference, SWST 60th International Convention 2017, Vancouver, BC, Canada, 12.06.2017 - 16.06.2017]
2016
Journal Articles
** Himsel, A; van Herwijnen, HWG; Moser, J; Kantner, W; Mitter, R; Giesswein, J; Muuller, U Describing the sticking phenomenon of aminoplastic resins: dependency on temperature and relative humidity.
EUR J WOOD WOOD PROD. 2016; 74(1): 31-36. WoS FullText FullText_BOKUConference & Workshop Proceedings, Paper, Abstract
Leitgeb, W.; Kirschbichler, S.; Jost, T.; Mayrhofer, P.; Wagner, W.; Müller, U.
(2016): Holz im strukturellen Fahrzeugbau.
[2. Interdisziplinäres Fahrzeugkolloquium 2016 Dresden, Dresden, Germany, 15.06.2016 - 16.06.2016]
Mueller, U; Vay, O; Martinez-Conde, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A
(2016): Converting wood into timber and particles - new approaches .
[World Conference on Timber Engineering WCTE 2016, Vienna, Austria, 22.08.2016 - 25.08.2016]
Müller, U.; Schickhofer, G.; Brandner, R.
(2016): Der Einsatz des Götterbaums im Baubereich.
[Forstwissenschaftliche Tagung 2016, Freiburg, Germany, 26.09.2016 - 29.09.2016]
Chapter in Collected Volumes
Müller, U. (2016): Nadelholzäste - ein einzigartiges Modell für optimierte Verbindungsstrukturen.
In: Teischinger, A., Lignovisionen 31, 59-65; Universität f. Bodenkultur Wien, Wien; ISBN 1681-28082015
Journal Articles
** Himsel, A; Moser, J; Kantner, W; Mitter, R; Giesswein, J; van Herwijnen, HWG; Muller, U Describing the sticking phenomenon of aminoplastic resins: introduction of a new test method.
WOOD SCI TECHNOL. 2015; 49(4): 681-694. WoS FullText FullText_BOKU** Himsel, A; Muller, U; Kantner, W; Moser, J; Mitter, R; van Herwijnen, HWG Novel Analytical Method to Determine Factors Causing Unwanted Sticking of Glued Wood Particles onto Machinery Parts.
FOREST PROD J. 2015; 65(1-2): 54-59. WoS** Mahrdt, E; Stockel, F; van Herwijnen, HWG; Muller, U; Kantner, W; Moser, J; Gindl-Altmutter, W Light microscopic detection of UF adhesive in industrial particle board.
WOOD SCI TECHNOL. 2015; 49(3): 517-526. WoS FullText FullText_BOKU** Müller, U; Gindl-Altmutter, W; Konnerth, J; Maier, GA; Keckes, J; Synergy of multi-scale toughening and protective mechanisms at hierarchical branch-stem interfaces..
Sci Rep. 2015; 5:14522
WoS
PubMed
FullText
FullText_BOKU
** Muller, U; Ringhofer, A; Brandner, R; Schickhofer, G Homogeneous shear stress field of wood in an Arcan shear test configuration measured by means of electronic speckle pattern interferometry: description of the test setup.
WOOD SCI TECHNOL. 2015; 49(6): 1123-1136. WoS FullText FullText_BOKU** Vay, O; De Borst, K; Hansmann, C; Teischinger, A; Muller, U Thermal conductivity of wood at angles to the principal anatomical directions.
WOOD SCI TECHNOL. 2015; 49(3): 577-589. WoS FullText FullText_BOKU* Krenke, T; Frybort, S; Martinez-Conde Lopez, A; Müller, U (2015): Internationaler Stand zur Schnittkraftuntersuchung bei Holz - Teil 3.
Holztechnologie, 56(2), 43-50; ISSN 0018-3881 FullText* Krenke, T Frybort, S; Martinez-Conde Lopez A; Müller, U (2015): Internationaler Stand zur Schnittkraftuntersuchung bei Holz - Teil 2.
Holztechnologie, 56, 35-44; ISSN 0018-3881* Müller, U; Vay, O; Martinez-Conde Lopez, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A (2015): Innovative mechanische Trenntechnologien von Holz.
Holztechnologie, 56, 29-34; ISSN 0018-3881Conference & Workshop Proceedings, Paper, Abstract
Frybort, S., Krenke, T., Herwijnen, E., Müller, U., Mauritz, R.
(2015): A Novel Wood Composite.
[Innovations in Wood Materials and Processes, Brno, Czech Republic, 19.05.2015 - 22.05.2015]
Himsel, A., van Herwijnen, H.W.G., Kantner, W., Moser, J., Mitter, R., Gießwein, J., Müller U.
(2015): Describing the Tack of Aminoplastic Adhesives.
[16th Austrian Chemistry Days Chemical Societies, Innsbruck, Austria, 21.09.2015 - 24.09.2015]
Krenke, T., Frybort, S., Martinez-Conde Lopez, A., Müller, U.
(2015): Cutting force analysis of spruce and beech by means of a noval filtering method.
[22nd International Wood Machining Seminar, Quebec City, PQ, Canada, 14.06.2015 - 17.06.2015]
Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J. Teischinger, A.
(2015): Neue Wege im mechanischen Holzaufschluss - alternative Technologien, Energieeinsparung und Ressourceneffizienz
.
[Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien, Regensburg, Germany, 12.11.2015]
Riegler, M; Müller, M; Hansmann, C; Müller, U
(2015): Potential of granulated maize cobs as substitute for particleboard production
.
[International Panel Product Symposium IPPS 2015, Llandudno, UK, 07.10.2015 - 08.10.2015]
2014
Journal Articles
** Forsthuber, B; Muller, U; Teischinger, A; Grull, G A note on evaluating the photocatalytical activity of anatase TiO2 during photooxidation of acrylic clear wood coatings by FTIR and mechanical characterization.
POLYM DEGRAD STABIL. 2014; 105: 206-210. WoS FullText FullText_BOKU** Frybort, S; Obersriebnig, M; Muller, U; Gindl-Altmutter, W; Konnerth, J Variability in surface polarity of wood by means of AFM adhesion force mapping.
COLLOID SURFACE A. 2014; 457: 82-87. WoS FullText FullText_BOKU** Haider, A; Reitberger, M; Lesslhumer, J; Plank, B; Muller, U Wood polymer composites versus thermally treated wood versus wood: cyclic testing.
EUR J WOOD WOOD PROD. 2014; 72(6): 815-823. WoS FullText FullText_BOKU** Veigel, S; Grull, G; Pinkl, S; Obersriebnig, M; Muller, U; Gindl-Altmutter, W Improving the mechanical resistance of waterborne wood coatings by adding cellulose nanofibres.
REACT FUNCT POLYM. 2014; 85: 214-220. WoS FullText FullText_BOKU* Krenke, T; Frybort, S; Müller, U (2014): Internationaler Stand zur Schnittkraftuntersuchung bei Holz - Teil 1.
Holztechnologie, 56(4), 38-45; ISSN 0018-3881* Krenke, T; Frybort, S; Müller, U (2014): Internationaler Stand zur Schnittkraftuntersuchung bei Holz - Review Teil 1.
Holztechnologie, 56(4), 38-45; ISSN 0018-3881* Neuhäuser, A E; D'Amico, S; van Herwijnen, H W G; Müller, U (2014): Natürlich geschäumtes Leichtprodukt auf Holzbasis.
Holztechnologie, 56(4), 12-17; ISSN 0018-3881* Pleschberger, H; Teischinger, A; Müller, U; Hansmann, C (2014): Change in fracturing and colouring of solid spruce and ash wood after thermal modification.
Wood Material Science and Engineering, 9, 92-101; ISSN 1748-0272Conference & Workshop Proceedings, Paper, Abstract
Dworak, S., Riegler, M., Hansmann, C., Müller, U.
(2014): Potential of computer tomography in sawmills – value optimization for processing high grade logs.
[IAWS Plenary Meeting 2014 - Eco-efficient resource Wood with special focus on hardwoods, Sopron, Hungary, 15.09.2014 - 18.09.2014]
Frybort, S., Krenke, T., Müller, U.
(2014): Deformation analysis of cutting processes.
[57th SWST International Convention, 7th Wood Structure and Properties Conference and 6th European Hardwood Conference, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
Himsel, A., Müler, U., van Herwijnen, H.W.G., Kantner, W., Moser, J., Mitter, R.
(2014): Rheometer Method to Determine Factors Influencing Sticking Behavior of Aminoplastic Reins.
[57th International Convention of Society of Wood Science and Technology 2014, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
Krenke, T., Frybort, S., Müller, U.
(2014): 3D-cutting force analysis of hardwoods compared to softwoods. .
[IAWS PLENARY MEETING 2014 - SOPRON (HUNGARY) – VIENNA (AUSTRIA)” – ECO-EFFICIENT RESOURCE WOOD WITH SPECIAL FOCUS ON HARDWOODS, Sopron, Hungary, 15.09.2014 - 18.09.2014]
Krenke, T., Frybort, S., Vay, O., Müller, U.
(2014): A new method of dynamic 3D-cutting force analysis of wood.
[57th SWST International Convention, 7th Wood Structure and Properties Conference and 6th European Hardwood Conference, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
Mahrdt E., v.Herwijnen, E., Gindl-Altmutter, W. Kantner, W., Moser, J. Müller, U.
(2014): A New Analytical Method to Study UF Resin Distribution within Particle Boards.
[57th International Convention of Society of Wood Science and Technology 2014, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A.,
(2014): Innovative Trenn- und Aufteiltechnologien.
[16. Holztechnologisches Kolloquium, Dresden, Dresden, Germany, 03.04.2014 - 04.04.2014]
Neuhäuser, E., v.Herwijnen, E., D’Amico, S. Müller, U.
(2014): Lifecycle of a Novel Bio-based Wood Composite made of Sawmill Waste.
[57th International Convention of Society of Wood Science and Technology 2014, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
Riegler, M., Weigl, M., Müller, U.
(2014): The Role of Fibre Characteristics for Online Process Adaptation in the Manufacturing of MDF.
[57th SWST International Convention, 7th Wood Structure and Properties Conference and 6th European Hardwood Conference, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
U. Müller, J. Konnerth, W. Gindl-Altmutter, D. Kaserer, J. Keckes
(2014): Stamm-Astanbindung – eine biologisch optimierte Struktur mit hoher mechanischer Leistungsfähigkeit.
[Grazer Holzbau-Fachtagung - GraHFT 2014, Graz, Austria, 26.09.2014]
van Herwijnen, H.W.G., D'Amico, S, Müller, U., Neuhäuser, A. E.
(2014): Foamed wood, a novel light weight bio-based material .
[Biobased Materials - 10th Congress for Biobased Materials, Natural Fibres and WPC, Fellbach, Germany, 24.06.2014 - 25.06.2014]
Vay, O., Hansmann, C., Teischinger, A., Müller, U.
(2014): Thermal conductivity of hollow chamber sandwich boards.
[Processing Technologies for the Forest and Biobased Products Industries, Kuchl, Austria, 24.09.2014 - 26.09.2014]
Vay, O., Konnerth, J., Frybort, S., Krenke, T., Teischinger, A., Müller, U.
(2014): Cross industry Innovation process to identify "new" Technologies for mechanical Wood disintegration.
[Poster]
[57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]
2013
Journal Articles
** DxxxAmico, S; Muller, U; Berghofer, E Effect of hydrolysis and denaturation of wheat gluten on adhesive bond strength of wood joints.
J APPL POLYM SCI. 2013; 129(5): 2429-2434. WoS FullText FullText_BOKU** Forsthuber, B; Muller, U; Teischinger, A; Grull, G Chemical and mechanical changes during photooxidation of an acrylic clear wood coat and its prevention using UV absorber and micronized TiO2.
POLYM DEGRAD STABIL. 2013; 98(7): 1329-1338. WoS FullText FullText_BOKU** Hauptmann, M; Muller, U; Obersriebnig, M; Gindl-Altmutter, W; Beck, A; Hansmann, C The Optical Appearance of Wood Related to Nanoscale Surface Roughness.
BIORESOURCES. 2013; 8(3): 4038-4045. WoS** Pleschberger, H; Hansmann, C; Muller, U; Teischinger, A Fracture energy approach for the identification of changes in the wood caused by the drying processes.
WOOD SCI TECHNOL. 2013; 47(6): 1323-1334. WoS FullText FullText_BOKU** Pleschberger, H; Teischinger, A; Muller, U; Hansmann, C Mechanical Characterization of Lumber of Small-Diameter Hardwood Species after Different Drying Schedules.
DRY TECHNOL. 2013; 31(9): 1056-1062. WoS FullText FullText_BOKU** Rathke, J; Riegler, M; Weigl, M; Muller, U; Sinn, G Analyzing Process Related, In-Plane Mechanical Variation of High Density Fiber Boards (HDF) Across the Feed Direction.
BIORESOURCES. 2013; 8(3): 3982-3993. WoS** Riegler, M; Spangl, B; Weigl, M; Wimmer, R; Muller, U Simulation of a real-time process adaptation in the manufacture of high-density fibreboards using multivariate regression analysis and feedforward control.
WOOD SCI TECHNOL. 2013; 47(6): 1243-1259. WoS FullText FullText_BOKU** Vay, O; Obersriebnig, M; Muller, U; Konnerth, J; Gindl-Altmutter, W Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM).
HOLZFORSCHUNG. 2013; 67(2): 155-159. WoS FullText FullText_BOKU** Weigl, M; Schmidberger, C; Muller, U Water retention of wood particles - characterization of polarity and particle size.
EUR J WOOD WOOD PROD. 2013; 71(2): 147-151. WoS FullText FullText_BOKUConference & Workshop Proceedings, Paper, Abstract
Hauptmann, M., Müller, M., Hanea, H., Müller, U., Hansmann, C.
(2013): Influence of wood structure on the sorting of high quality walnut (Juglans nigra) timber.
[4th International Scientific Conference on Hardwood Processing (ISCHP 13), Florence, Italy, 07.10.2013 - 09.10.2013]
Himsel, A., Müller, U., Kantner, W.,Moser, J., Mitter, R., van Herwijnen, H.W.G.
(2013): Novel analytical method to determine factors causing unwanted sticking of glued wood particles onto machinery parts.
[International Conference on Wood Adhesives 2013, Toronto, Ontario, Canada, 09.10.2013 - 11.10.2013]
Müller, U., Meints, T., Hansmann, C. Hauptmann, M., Teischinger, A.
(2013): Colour intensification of solid wood surfaces after wetting - a physical model for better understanding of colour effects.
[4th International Scientific Conference on Hardwood Processing (ISCHP 13), Florence, Italy, 07.10.2013 - 09.10.2013]
van Herwijnen, H. W. G., Mahrdt, E., Gindl-Altmutter, W., Kantner, W., Moser, J., Müller, U., Stöckl, F.
(2013): Novel methods to investigate the UF resin distribution within industrial MDF and particleboards.
[International Conference on Wood Adhesives 2013, Toronto, Ontario, Canada, 09.10.2013 - 11.10.2013]
2012
Journal Articles
** Buksnowitz, C; Evans, R; Muller, U; Teischinger, A Indented rings (hazel growth) of Norway spruce reduce anisotropy of mechanical properties.
WOOD SCI TECHNOL. 2012; 46(6): 1239-1246. WoS FullText FullText_BOKU** DxxxAmico, S; Hrabalova, M; Muller, U; Berghofer, E Influence of ageing on mechanical properties of wood to wood bonding with wheat flour glue.
EUR J WOOD WOOD PROD. 2012; 70(5): 679-688. WoS FullText FullText_BOKU** Frybort, S; Mauritz, R; Teischinger, A; Muller, U INVESTIGATION OF THE MECHANICAL INTERACTIONS AT THE INTERFACE OF WOOD-CEMENT COMPOSITES BY MEANS OF ELECTRONIC SPECKLE PATTERN INTERFEROMETRY.
BIORESOURCES. 2012; 7(2): 2483-2495. WoS** Gindl-Altmutter, W; Muller, U; Konnerth, J The significance of lap-shear testing of wood adhesive bonds by means of Volkersen's shear lag model.
EUR J WOOD WOOD PROD. 2012; 70(6): 903-905. WoS FullText FullText_BOKU** Konnerth, J; Muller, U; Gindl, W; Buksnowitz, C Reliability of wood adhesive bonds in a 50 year old glider construction.
EUR J WOOD WOOD PROD. 2012; 70(1-3): 381-384. WoS FullText FullText_BOKU** Rathke, J; Muller, U; Konnerth, J; Sinn, G Strain Measurements within Fibreboard. Part III: Analyzing the Process Zone at the Crack Tip of Medium Density Fiberboards (MDF) Double Cantilever I-Beam Specimens.
MATERIALS. 2012; 5(11): 2190-2204. WoS FullText FullText_BOKU** Rathke, J; Sinn, G; Harm, M; Teischinger, A; Weigl, M; Muller, U EFFECTS OF ALTERNATIVE RAW MATERIALS AND VARYING RESIN CONTENT ON MECHANICAL AND FRACTURE MECHANICAL PROPERTIES OF PARTICLE BOARD.
BIORESOURCES. 2012; 7(3): 2970-2985. WoS** Rathke, J; Sinn, G; Konnerth, J; Muller, U Strain Measurements within Fiber Boards. Part I: Inhomogeneous Strain Distribution within Medium Density Fiberboards (MDF) Loaded Perpendicularly to the Plane of the Board.
MATERIALS. 2012; 5(6): 1115-1124. WoS FullText FullText_BOKU** Rathke, J; Sinn, G; Weigl, M; Muller, U Analysing orthotropy in the core layer of wood based panels by means of fracture mechanics.
EUR J WOOD WOOD PROD. 2012; 70(6): 851-856. WoS FullText FullText_BOKU** Riegler, M; Gindl-Altmutter, W; Hauptmann, M; Muller, U Detection of UF resin on wood particles and in particleboards: potential of selected methods for practice-oriented offline detection.
EUR J WOOD WOOD PROD. 2012; 70(6): 829-837. WoS FullText FullText_BOKU** Sinn, G; Muller, U; Konnerth, J; Rathke, J Strain Measurements within Fibre Boards. Part II: Strain Concentrations at the Crack Tip of MDF Specimens Tested by the Wedge Splitting Method.
MATERIALS. 2012; 5(8): 1495-1507. WoS FullText FullText_BOKU** Veigel, S; Follrich, J; Gindl-Altmutter, W; Muller, U Comparison of fracture energy testing by means of double cantilever beam-(DCB)-specimens and lap joint testing method for the characterization of adhesively bonded wood.
EUR J WOOD WOOD PROD. 2012; 70(1-3): 3-10. WoS FullText FullText_BOKU** Weigl, M; Muller, U; Wimmer, R; Hansmann, C Ammonia vs. thermally modified timber-comparison of physical and mechanical properties.
EUR J WOOD WOOD PROD. 2012; 70(1-3): 233-239. WoS FullText FullText_BOKU* Rathke, J; Huber, H; Teischinger, A; Müller, U; Hansmann, C (2012): Verwendbarkeit von Laubschwachholz in der Sägeindustrie. Teil 1: Ausbeuteberechnung und Technologiebewertung.
Holztechnologie, 53, 46-50; ISSN 0018-3881* Rathke, J; Huber, H; Teischinger, A; Müller, U; Hansmann, C (2012): Verwendbarkeit von Laubschwachholz in der Sägeindustrie. Teil 2: Produktionskostenkalkulation und Berechnung des maximal möglichen Rundholzpreises.
Holztechnologie, 53, 50-54; ISSN 0018-3881* Rathke, J; Sinn, G; Harm, M Teischinger, A; Weigl, M; Müller U (2012): Fracture energy vs. internal bond strength- mechanical characterization of wood based panels.
Wood Material Science and Engineering, 7(4), 174-185; ISSN 1748-0272Conference & Workshop Proceedings, Paper, Abstract
Riegler, M., Spangl, B., Weigl M., Kuncinger, T., Wimmer, R., Young, T.M., Müller, U.
(2012): REAL-TIME SIMULATION OF A FEEDFORWARD CONTROL PROCESS ADAPTATION AT THE MANUFACTURING OF FIBERBOARDS.
[2nd Biennial International Conference on Processing Technologies for the Biobased Products Industries PTF BPI 2012, St. Simons Island, GA, USA, 06.11.2012 - 07.11.2012]
Teischinger, A., Müller, U.
(2012): Wood and natural fibre-based light weigth panels: Opportunities and limitation.
[8th European Wood-based Panel Symposium 2012, Hanover, Germany, 11.10.2012 - 12.10.2012]
2011
Journal Articles
** Follrich, J; Teischinger, A; Muller, U Artificial ageing of softwood joints and its effect on internal bond strength with special consideration of flat-to-end grain joints.
EUR J WOOD WOOD PROD. 2011; 69(4): 597-604. WoS FullText FullText_BOKU** Valla, A; Konnerth, J; Keunecke, D; Niemz, P; Muller, U; Gindl, W Comparison of two optical methods for contactless, full field and highly sensitive in-plane deformation measurements using the example of plywood.
WOOD SCI TECHNOL. 2011; 45(4): 755-765. WoS FullText FullText_BOKU** Veigel, S; Muller, U; Keckes, J; Obersriebnig, M; Gindl-Altmutter, W Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds.
CELLULOSE. 2011; 18(5): 1227-1237. WoS FullText FullText_BOKU* Müller, U; Teischinger, A (2011): Entwicklung von Leichtbauwerkstoffen - Technology Push oder Technology bzw. Market Pull.
Holztechnologie, 52, 22-26; ISSN 0018-38812010
** Buksnowitz, C; Hackspiel, C; Hofstetter, K; Muller, U; Gindl, W; Teischinger, A; Konnerth, J Knots in trees: strain distribution in a naturally optimised structure.
WOOD SCI TECHNOL. 2010; 44(3): 389-398. WoS FullText FullText_BOKU** Buksnowitz, C; Teischinger, A; Grabner, M; Muller, U; Mahn, L TRACHEID LENGTH IN NORWAY SPRUCE (PICEA ABIES (L.) KARST.) ANALYSIS OF THREE DATABASES REGARDING TREE AGE, CAMBIAL AGE, TREE HEIGHT, INTER-ANNUAL VARIATION, RADIAL DISTANCE TO PITH AND LOG QUALITIES.
WOOD RES. 2010; 55(4): 1-13. WoS** D'Amico, S; Hrabalova, M; Muller, U; Berghofer, E Bonding of spruce wood with wheat flour glue-Effect of press temperature on the adhesive bond strength.
IND CROPS PRODUCTS. 2010; 31(2): 255-260. WoS FullText FullText_BOKU** Follrich, J; Hora, M; Muller, U; Teischinger, A; Gindl, W ADHESIVE BOND STRENGTH OF END GRAIN JOINTS IN BALSA WOOD WITH DIFFERENT DENSITY.
WOOD RES. 2010; 55(1): 21-31. WoS** Follrich, J; Muller, U; Gindl, W; Mundigler, N Effects of Long-term Storage on the Mechanical Characteristics of Wood Plastic Composites Produced from Thermally Modified Wood Fibers.
J THERMOPLAST COMPOS MATER. 2010; 23(6): 845-853. WoS FullText FullText_BOKU** Follrich, J; Muller, U; Teischinger, A RELATIONSHIP BETWEEN RADIAL AND LONGITUDINAL SWELLING IN DEPENDENCE OF GRAIN ORIENTATION.
WOOD RES. 2010; 55(2): 1-6. WoS** Follrich, J; Vay, O; Veigel, S; Muller, U Bond strength of end-grain joints and its dependence on surface roughness and adhesive spread.
J WOOD SCI. 2010; 56(5): 429-434. WoS FullText FullText_BOKU** Frybort, S; Mauritz, R; Teischinger, A; Muller, U Determination of the bond strength of treated wood strands embedded in aaEuro-aEuro-cement matrix by means of aaEuro-aEuro-pull-out test.
EUR J WOOD WOOD PROD. 2010; 68(4): 407-414. WoS FullText FullText_BOKU** Konnerth, J; Stockel, F; Muller, U; Gindl, W Elastic Properties of Adhesive Polymers. III. Adhesive Polymer Films Under Dry and Wet Conditions Characterized by Means of Nanoindentation.
J APPL POLYM SCI. 2010; 118(3): 1331-1334. WoS FullText FullText_BOKU* Teischinger, A; Müller, U (2010): Vom Technologiebegriff zur Technologie des Holzes - ein Essay.
Holztechnologie, 51 (4), 5-7; ISSN 0018-3881Conference & Workshop Proceedings, Paper, Abstract
Christoph Buksnowitz, Ulrich Müller, Wolfgang Gindl, Johannes Konnerth
(2010): Strain distributions around knots in Picea abies (L.) boards subjected to tensile load..
[Poster]
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]
Hansmann C, Pleschberger H, Stingl R, Wolfsmayr U, Müller U
(2010): Selected properties of juvenile plantation teak wood.
[4th Conference on Hardwood Research and Utilisation in Europe 2010 - Hardwood Science and Technology, Sopron, Hungary, 17.05.2010 - 18.05.2010]
Johannes Konnerth, Ulrich Müller, Wolfgang Gindl, Christoph Buksnowitz
(2010): Strain distribution in a spruce branch-stem junction.
[Poster]
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]
Müller, U., Teischinger, A.,
(2010): Leichtbauwerkstoffe - Technology Push vs. Market Pull.
[14. Holztechnologisches Kolloquium 2010 - Werkstoffe aus Holz und Holzbearbeitung im Fokus von Forschung und Entwicklung, Dresden, Germany, 08.04.2010 - 09.04.2010]
Pleschberger H, Müller U, Teischinger A, Stingl R, Hansmann C
(2010): Mechanical properties of small diameter hardwood.
[Poster]
[4th Conference on Hardwood Research and Utilisation in Europe 2010 - Hardwood Science and Technology, Sopron, Hungary, 17.05.2010 - 18.05.2010]
Pleschberger H.L, Teischinger A, Mülle U, Hansmann C
(2010): Quality control by colour measurements after different drying schedules of solid plantation teakwood (Tectona grandis L.f.).
[‘The Future of Quality Control for Wood & Wood Products’, the Final Conference of COST Action E53, Edinburgh, Scotland, UK, 04.05.2010 - 07.05.2010]
Teischinger, A., Müller, U., Konnerth, J.
(2010): Possibilities and limits of wood-fibre based composites.
[8th Global WPC and Natural Fibre Composites Congress and Exihibition 2010, Stuttgart, Germany, 22.06.2010 - 23.06.2010]
Veigel, S. , Müller, U., Konnerth, J., Gindl, W.
(2010): Cellulose fibers and nanofibrils for adhesive reinforcement.
[International Conference on Nanotechnology for the Forest Products Industry, Espoo, Finland, 27.09.2010]
2009
Journal Articles
** Follrich, J., Frybort, S., Teischinger, A., Müller U. Fillets formed by adhesive bonding of axially oriented webs to flat grain wood pieces and their effects on bond strength.
J SANDW STRUCT MATER, 11(2), 245-256; ISSN 1099-6362 WoS FullText FullText_BOKU** Godara, A; Raabe, D; Bergmann, I; Putz, R; Muller, U Influence of additives on the global mechanical behavior and the microscopic strain localization in wood reinforced polypropylene composites during tensile deformation investigated using digital image correlation.
COMPOSITES SCI TECHNOL. 2009; 69(2): 139-146. WoS FullText FullText_BOKU** Haider, A; Nguyen, HL; Muller, U; Muller, U; Endesfelder, A Melamine-resin based Wood Plastic Composites (WPC) - heat resistance.
EUR J WOOD WOOD PROD. 2009; 67(1): 71-76. WoS FullText FullText_BOKU* Follrich, J; Müller, U; Teischinger, A (2009): Einfluss der spezifischen Leimauftragsmenge und des Faserwinkels auf die Querzugfestigkeit einer Holzverklebung.
Holztechnologie, 5/2009, 12-18; ISSN 0018-3881* Follrich, J; Vay, O; Veigel, S; Müller, U (2009): Comparison of the effect of chemical and mechanical treatment of end-grain surfaces on adhesive bond strength.
Wood Material Science and Engineering, 4(3), 98-104; ISSN 1748-0272 FullText* Haider, A; Nguyen, H L; Müller, U; Müller, U; Endesfelder, A (2009): Melaminharzbasierende duromere Wood PlasticComposites (WPC) – Wärmeformbeständigkeit.
HOLZ ROH WERKST, 67 (1), 71-76; ISSN 0018-3768Conference & Workshop Proceedings, Paper, Abstract
Hansmann, C., Stingl, R., Pleschberger, H., Müller, U
(2009): Bonding of plantation Teak wood with various adhesives.
[International Conference on Wood Adhesives ICWA 2009, Lake Tahoe, NV, USA, 28.09.2009 - 30.09.2009]
Müller, U.; Veigel, S.; Follrich, J.; Gabriel, J.; Gindl, W.
(2009): Performance of One Component Polyurethane in Comparison to Other Wood Adhesives.
[International Conference on Wood Adhesives ICWA 2009, Lake Tahoe, NV, USA, 28.09.2009 - 30.09.2009]
Pleschberger, H., Hansmann, C., Müller, U., Follrich, J., Fryport, S., Oltean, L., Teischinger, A.
(2009): Fracture energy along the grain of teakwood under mode I loading after selected drying schedules.
[2nd International Scientific Conference on Hardwood Processing ISCHP/09 2009, Paris, France, 28.09.2009 - 29.09.2009]
Weigl, M., Müller, U.
(2009): On the physical and mechanical properties of ammonia treated wood .
[Poster]
[ECWM4 (European Conference on Wood Modification), Stockholm, Sweden, 27.04.2009 - 29.04.2009]
Chapter in Collected Volumes
Weigl, Martin; Kandelbauer, Andreas; Hansmann, Christian; Pöckl, Johannes; Müller, Ulrich; Grabner, Michael (2009): Application of Natural Dyes in the Coloration of Wood.
In: Bechtold, Thomas; Mussak, Rita (Eds.), Handbook of Natural Colorants, 277-313; John Wiley & Sons, Chichester, UK; ISBN 978-0-470-5119922008
Journal Articles
** Buksnowitz, C; Muller, U; Evans, R; Teischinger, A; Grabner, M The potential of SilviScan's X-ray diffractometry method for the rapid assessment of spiral grain in softwood, evaluated by goniometric measurements.
WOOD SCI TECHNOL. 2008; 42(2): 95-102. WoS FullText FullText_BOKU** Follrich, J., Teischinger, A., Gindl, W., Müller, U. Adhesive bond strength of end grain joints in softwood with varying density .
HOLZFORSCHUNG, 62, 237-242; ISSN 0018-3830 WoS FullText FullText_BOKU** Rosner, S; Klein, A; Müller, U; Karlsson, B; Tradeoffs between hydraulic and mechanical stress responses of mature Norway spruce trunk wood..
Tree Physiol. 2008; 28(8):1179-1188
WoS
PubMed
FullText
* Frybort, S; Mauritz, R; Teischinger, A; Müller, U (2008): Cement bondes composites -a mechanical review.
BioResources, 3(2), 602-626; ISSN 1930-2126Conference & Workshop Proceedings, Paper, Abstract
D'Amico S., U. Müller, E. Berghofer
(2008): Wood-starch composite - investigation on the adhesion between starch and wood.
[Poster]
[7th Global WPC and Natural Fibre Composites Congress and Exhibition 2008, Kassel, Germany, 18.06.2008 - 19.06.2008]
Hackspiel, C., Hofstetter, K., Müller U.
(2008): Prediction of Effective Stiffness Properties of Wooden Lightweight Panels by means of Numerical Simulations.
[8th World Congress on Computational Mechanics WCCM 8 and the 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, Venice, Italy, 30.06.2008 - 04.07.2008]
Haider A., Nguyen H-L., Müller U., Müller Ul., Endesfelder A.
(2008): Novel Wood / Melamine Resin Composites - Influence of additives on processing behaviour and material properties.
[7th Global WPC and Natural Fibre Composites Congress and Exhibition 2008, Kassel, Germany, 18.06.2008 - 19.06.2008]
2007
Journal Articles
** Buksnowitz, C; Teischinger, A; Müller, U; Pahler, A; Evans, R; Resonance wood [Picea abies (L.) Karst.]--evaluation and prediction of violin makers" quality-grading..
J Acoust Soc Am. 2007; 121(4):2384-2395 WoS PubMed** Follrich, J., Müller, U., Teischinger, A. Internal bond strength of flat to end grain softwood joints.
WOOD RES-SLOVAKIA, 53, 49-58; ISSN 0012-6136 WoS** Follrich, J., Teischinger, A., Gindl, W., Müller, U. Effect of grain angle on shear strength of glued end grain to flat grain joints of defect-free softwood timber. DOI 10.1007/s00226-007-0136-7 .
WOOD SCI TECHNOL, 41(6), 501-509; ISSN 0043-7719 WoS FullText FullText_BOKU** Joscak, T., Mamonova, M., Babiak, M., Teischinger, A., Müller, U. Effects of high temperature drying in nitrogen atmosphere on mechanical and colour properties of Norway spruce.
HOLZ ROH WERKST, 65, 285-291; ISSN 0018-3768 WoS FullText FullText_BOKU** Konnerth, J., Gindl, W., Müller, U. Elastic properties of adhesive polymers. Part I: polymer films by means of electronic speckle pattern interferometry.
Journal of Applied Polymer Science, 103, 3936-3939 WoS FullText FullText_BOKU** Rosner, S; Klein, A; Müller, U; Karlsson, B; Hydraulic and mechanical properties of young Norway spruce clones related to growth and wood structure..
Tree Physiol. 2007; 27(8):1165-1178
WoS
PubMed
* Follrich, J; Hansmann, C; Teischinger, A; Müller, U (2007): Tensile strength of softwood butt end joints. Part 2: Improvement of bond strength by a hydroxymethylated resorcinol primer.
Wood Material Science and Engineering, 2, 90-95; ISSN 1748-0272* Follrich, J; Teischinger, A; Gindl, W; Müller, U (2007): Tensile strength of softwood butt end joints. Part 1: Effect of grain angle on adhesive bond strength .
Wood Material Science and Engineering, 2, 83-89; ISSN 1748-0272Conference & Workshop Proceedings, Paper, Abstract
Hackspiel, C., Hofstetter, K., Müller U.
(2007): Micromechanical Characterization of Wooden Lightweight Panels.
[16th Inter-Institute Seminar for Young Researchers, Vienna, Austria, 17.05.2007 - 20.05.2007]
Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W
(2007): Wood adhesive bondlines by Nanoindentation.
[13th International Conference on Experimental Mechanics 2007, Alexandroupolis, Greece, 01.07.2007 - 06.07.2007]
Weigl, M., Pöckl, J., Müller, U., Pretzl, H. & Grabner M.
(2007): UV-resistance of ammonia treated wood..
[3rd European Conference on Wood Modification 2007, Cardiff, Wales, UK, 15.10.2007 - 16.10.2007]
Chapter in Collected Volumes
Teischinger, A., Müller, U. (2007): Ressourcenverkanppung in der Holzwirtschaft als Herausforderung für Technologie und Innovatin (Wood Resources in Short Supply - a Challenge for Technology and Innovation.
In: Teischinger, A. Hrsg., LIGNOVISIONEN 15, 49; Universität für Bodenkultur, Wien; ISBN ISSN 1681-2808Habilitation Thesis
Müller, U. (2007): RELATIONSHIP BETWEEN STRUCTURAL & MECHANICAL PROPERTIES OF WOOD-BASED MATERIALS.
Habilitationsschrift zur Erlangung der Lehrbefugnis an der Universität für Bodenkultur Wien, 159; Universität für Bodenkultur Wien; Holztechnologie2006
Journal Articles
** Follrich, J., Müller, U., Gindl, W. Effects of thermal modification on adhesion between spruce wood and a thermoplastic polymer.
HOLZ ROH WERKST, 64, 373-376; ISSN 0018-3768 WoS FullText FullText_BOKU** Gindl, W., Müller, U. Shear strain distribution in PRF and PUR bonded 3-plywood sheets by means of electronic laser speckle interferometry.
Wood Science and Technology, 40, 351-357 WoS FullText FullText_BOKU** Joscak, T; Teischinger, A; Muller, U; Mauritz, R Production and material performance of long-strand wood composites - Review.
WOOD RES. 2006; 51(3): 37-49. WoS** Konnerth, J., Gindl, W., Harm, M., Müller, U. Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf- and lap joint testing method.
Holz als Roh- und Werkstoff, 64, 269-271 WoS FullText FullText_BOKU** Konnerth, J., Jäger, A., Eberhardsteiner, J., Müller, U., Gindl, W. Elastic properties of adhesive polymers. Part II: Polymer films and bond lines by means of nanoindentation.
Journal of Applied Polymer Science, 102, 2, 1234-1239 WoS FullText FullText_BOKU** Konnerth, J., Valla, A., Gindl, W., Müller, U. Measurement of strain distribution in timber finger joints.
WOOD SCI TECHNOL, 40, 631-636; ISSN 0043-7719 WoS FullText FullText_BOKU** Müller, U., Jeronimidis, G., Gindl, W. Biomechanics of a branch – stem junction in softwood.
Trees-Structure and Function. 20: 643-648 WoS FullText FullText_BOKU** Sretenovic, A., Müller, U., Gindl, W. Mechanism of stress transfer in a single wood fibre-LDPE composite - Electronic laser speckle interferometry and numerical validation.
Composites Part A, 37, 1406-1412 WoS FullText FullText_BOKU* Adusumalli, R B; Müller, U; Weber, H; Roeder, T; Sixta, H; Gindl, W (2006): Tensile testing of single regenerated cellulose fibres.
MACROMOL SYMP, 244, 83-88; ISSN 1022-1360Bergmann, I; Müller, U; Zodl, H (2006): Einfluss von Stärke und Feuchte auf die HolzextrusionHolztechnologie.
Holztechnologie, 47, 4, 33-38Follrich, J; Stache, M; Teischinger, A; Müller, U (2006): Thermoplastische Oberflächenbeschichtung mittels Heizkeilschweißverfahren - Einflussfaktoren auf die Ausbildung der Abhebefestigkeit.
Holztechnologie, 47, 3, 32-36* Teischinger, A; Müller, U (2006): Holzeigenschaften von Nadelstarkholz und sein technologisches Potenzial.
Schweiz. Z. Forstwes., 157, 561-564; ISSN 0036-7818Conference & Workshop Proceedings, Paper, Abstract
Follrich, J., Berger, J., Frybort, S., Teischinger, A., Müller, U.
(2006): DendroLight (R) - an innovative wood based light weight panel.
[Wood resources and panel properties - COST Action E44 - E49 2006, Valencia, Spain, 12.06.2006 - 13.06.2006]
Teischinger, A., Buksnowitz, C., Müller, U.
(2006): Wood Properties of old Growth Spruce and their technological Potential.
[5th IUFRO Symposium 2006 - Wood Structure and Properties '06, Sielnica, Slovak Republic, 03.09.2006 - 06.09.2006]
2005
Journal Articles
** Gindl, W; Sretenovic, A; Vincenti, A; Müller, U Direct measurement of strain distribution along a wood bond line – Part II: Effects of adhesive penetration on strain distribution.
Holzforschung, 59, 307-310 WoS FullText FullText_BOKU** M. Grabner, U. Müller, N. Gierlinger, R. Wimmer Effects of heartwood extractives on mechanical properties of larch.
IAWA Journal, 26, 2, 211-220 WoS FullText FullText_BOKU** Müller, U; Sretenovic, A; Vincenti, A; Gindl, W Direct measurement of strain distribution along a wood bond line – Part I: Shear strain concentration in a lap joint specimen by means of electronic speckle pattern interferometry.
Holzforschung, 59, 300-306 WoS FullText FullText_BOKU** Sretenovic, A; Muller, U; Gindl, W Comparison of the in-plane shear strength of OSB and plywood using five point bending and EN 789 steel plate test methods.
HOLZ ROH WERKST. 2005; 63(2): 160-164. WoS FullText FullText_BOKUMüller, U; Gindl, W; Teischinger, A (2005): Berührungslose Dehnungsmessung in Holz- und Holzwerkstoffen mittels Elektronischer Laser Speckle Interferometrie.
Holztechnologie, 46, 3, 48-49Teischinger, A; Müller, U; Korte, H (2005): Holz-Kunststoff-Verbundwerkstoffe (WPC) - Leistungsvergleich für eine neue Werkstoffgeneration mit vielfältigem Profil.
Holztechnologie, 46, 2, 30-342004
** Hannrup, B., Cahalan, C., Chantre, G., Grabner, M., Karlsson, B., Le Bayon, I., Müller, U., Pereira, H., Rodrigues, J.C., Rosner, S., Rozenberg, P., Wilhelmsson, L., Wimmer, R. Genetic parameters of growth and wood quality traits in Picea abies.
Scand. J. For. Res., 19, 14-29 WoS FullText FullText_BOKU** Müller, U., Müller, H., Teischinger, A. Durability of wood adhesives in 50 year old aircraft and glider constructions.
Wood Research - Drevarsky Vyskum, 49, 3, 25-33 WoS** Müller, U., Sretenovic, A., Gindl, W., Grabner, M., Wimmer, R., Teischinger, A. Effects of macro- and micro-structural variability on the shear behaviour of softwood.
IAWA Journal, 25, 231-243 WoS FullText FullText_BOKU** Muller, U; Sretenovic, A; Gindl, WA; Teischinger, A Longitudinal shear properties of european larch wood related to cell-wall structure.
WOOD FIBER SCI. 2004; 36(2): 143-151. WoS** Stretenovic, A, Müller, U, Gindl, W, Teischinger, A New shear assay for the simultaneous determination of shear strength and shear modulus in solid wood: finite element modeling and experiemental results.
Wood and Fiber Science, 36, 3, 302-310 WoS FullTextConference & Workshop Proceedings, Paper, Abstract
Gindl, M., G. Sinn, U. Müller, S. Stanzl-Tschegg
(2004): Quality parameters of coated particleboards.
[Sustain Life – Secure Survival ll. Socially and Environmentally Responsible Agribusiness 2004, Prague, Czech Republic, 22.09.2004 - 25.09.2004]
Gindl, W., A. Sretenovic, A. Vincenti, U. Müller
(2004): Micromechanics of adhesive bonds in wood.
[2nd Conference Sustain Life and Secure Survival 2004 - Socially and Environmentally Responsible Agribusiness, Prague, Czech Republic, 22.09.2004 - 25.09.2004]
Müller, U., Gindl, M., Sretenovic, A., Valla, A., Teischinger, A., Stanzl-Tschegg, S.
(2004): Strain distribution in coated particle board during linear cutting measured by means of electronic speckle pattern interferometry.
[Oral Communication]
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Müller, U., Gindl, M., Stretenovic, A., Teischinger, A., Stanzl-Tschegg, S.
(2004): Strain distribution in coated particle board during linear cutting measured by means of electronic speckle pattern interferometry.
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Müller, U., Gindl, W., Sretenovic, A., Teischinger, A.
(2004): Modeling the longitudinal shear properties of softwood with regard to macro- and micro-structural variability.
[2nd International Conference of the European Society for Wood Mechanics 2003, Stockholm, Sweden, 25.05.2003 - 28.05.2003]
Sretenovic, A., Müller, U., Gindl, W.
(2004): Stress transfer from matrix to the fibre in the wood particle-reinforced composite - analytical, numerical, and experimental results.
[3rd International Conference of the European Society for Wood Mechanics 2004, Vila Real, Portugal, 06.09.2004 - 08.09.2004]
Sretenovic, A., Müller, U., Gindl, W., Teischinger, A.
(2004): Comparison of the block-shear test and a new modified shear test set-up for the determination of shear modulus and shear strength in a single test.
[2nd International Conference of the European Society for Wood Mechanics 2003, Stockholm, Sweden, 25.05.2003 - 28.05.2003]
Sretenovic, A., U. Müller, W. Gindl
(2004): Numerical, experimental and analytical results of stress transfer from matrix to the fibre in a wood fibre-reinforced composite.
[2nd Conference Sustain Life and Secure Survival 2004 - Socially and Environmentally Responsible Agribusiness, Prague, Czech Republic, 22.09.2004 - 25.09.2004]
Teischinger, A., Korte, H., Müller, U.
(2004): Material performance and classification of wood plastic composites within wood based materials.
[Oral Communication]
[2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining, Vienna, Austria, 05.07.2004 - 07.07.2004]
Teischinger, A., Müller, U., Patzelt, M., Augustin, M., Schickhofer, G.
(2004): Wood quality assessment of old-growth spruce trees and their technological potential.
[2nd Conference Sustain Life and Secure Survival 2004 - Socially and Environmentally Responsible Agribusiness, Prague, Czech Republic, 22.09.2004 - 25.09.2004]
2003
Journal Articles
** Gindl, W., Müller, U., Teischinger, A. Transverse compression strength and fracture of spruce wood modified by melamine-formaldehyde impregnation of cell walls.
Wood and Fiber Science, 35, 239¿246 WoS** Müller, U., Gindl, W., Teischinger, A. Effects of cell anatomy on the plastic and elastic behaviour of different wood species loaded perpendicular to grain.
IAWA Journal, 24, 2, 117-128 WoS** Muller, U; Joscak, T; Teischinger, A Strength of dried and re-moistened spruce wood compared to native wood.
HOLZ ROH WERKST. 2003; 61(6): 439-443. WoS FullText FullText_BOKUConference & Workshop Proceedings, Paper, Abstract
Beer, P., Sinn, G., Müller, U., Gindl, M., Stanzl-Tschegg, S.
(2003): Influence of Cutter Blunting on Milling of Particle-Board.
[16th international wood machining seminar 2003, Matsue, Japan, 24.08.2003 - 27.08.2003]
Gindl, W., Müller, U.
(2003): The wood fiber - Naturally optimized design for different loading situations.
[ICCE-10, International conference on composites/nano engineering, New Orleans, LA, USA, 20.07.2003 - 26.07.2003]
Doctoral Thesis
Müller, U. (2003): Effects of wood macro- and micro-structure on selected mechanical properties.
Dissertation an der Universität für Bodenkultur Wien, 158; Wien2002
Journal Articles
** Hannrup, B., Grabner, M., Karlsson, B., Müller, U., Rosner, S., Wilhelmsson, L., Wimmer, R. Genetic parameters for spiral-grainangle in two 19-year-old clonal Norway spruce trials..
Ann.For.Sci., 59, 551-556 WoS FullText FullText_BOKU** Müller, U., Bammer, R., Teischinger, A. Detection of Incipient Fungal Attack in Wood Using Magnetic Resonance Parameter Mapping.
Holzforschung, 56, 529-534 WoSConference & Workshop Proceedings, Paper, Abstract
Joscák, T., Babiak, M., Müller, U., Teischinger, A.
(2002): Increased mechanical properties of spruce wood dried in nitrogen atmosphere compared to conventional kiln drying.
[4th IUFRO Symposium 2002, Bystrà, Slovak Republic, 01.09.2002 - 03.09.2002]
Müller, U., Gindl, W., Teischinger, A. (2002): Effects of cell anatomy on the plastic and elastic behaviour of different wood species loaded perpendicular to grain..
COST E20. Proceedings of Workshop "Cell wall and stress". 30th May - 1st June, Reims, France
Müller, U., Joscák, T., Teischinger, A.
(2002): Strength loss of dried and re-moistened spruce wood compared to native wet wood.
[4th IUFRO Symposium 2002, Bystrà, Slovak Republic, 01.09.2002 - 03.09.2002]
2001
Journal Articles
** Müller, U., Bammer, R., Halmschlager, E., Stollberger, R., Wimmer, R. Detection of fungal wood decay using Magnetic Resonance Imaging.
Holz als Roh- und Werkstoff, 59, 190-194 WoSConference & Workshop Proceedings, Paper, Abstract
Müller, U., Teischinger, A. (2001): Internal-Scanning - Fehlererkennung mit Hilfe der Magnet Resonanz Tomographie.
In: Moser, A. (Hrsg.): Proc., 177-180, Tagung des Österreichischen Forstvereins1999
Master / Diploma Thesis
Müller, U. (1999): Magnet-Resonanz-Tomographie als zerstörsfreie Analysemethode von Holz.
Diplomarbeit an der Universität für Bodenkultur Wien, Institut für Botanik, 150; Wien