University of Natural Resources and Life Sciences, Vienna (BOKU) - Research portal

Logo BOKU Resarch Portal

Konnerth Johannes

Scientific publications from BOKU scientists, especially those which are published in SCI / SSCI journals, or in other refereed journals, proceedings, monographs as well as articles in collected volumes are listed under PUBLICATIONS.

Publications with special focus on transfer of knowledge ("social impact") to practitioners as well as the interested public can be found under the menu item:

>> Transfer of Knowledge


** = Publications listed in SCI/SSCI - Journals (published in Web of Science)
* = peer-reviewed publication (not listed in SCI/SSCI)
Only: Full paper/article, Review, Proceedings Paper

= Open Access - Publications

 

2022

Journal Articles

** Bliem, P; van Herwijnen, HWG; Meissl, R; Stadlbauer, W; Konnerth, J Engineering of open assembly time of water-based polyvinyl acetate (PVAc) wood adhesives by post-addition of additives.

INT J ADHES ADHES. 2022; 117, 103011 WoS FullText FullText_BOKU

** Gusenbauer, C; Peter, K; Cabane, E; Konnerth, J Local force titration of wood surfaces by chemical force microscopy.

CELLULOSE. 2022; 29(2): 763-776. WoS PubMed PUBMED Central FullText FullText_BOKU

** Jakob, M; Mahendran, AR; Gindl-Altmutter, W; Bliem, P; Konnerth, J; Muller, U; Veigel, S The strength and stiffness of oriented wood and cellulose-fibre materials: A review.

PROG MATER SCI. 2022; 125, 100916 WoS FullText FullText_BOKU

** Tran, A; Konnerth, J; van Herwijnen, HWG; Gindl-Altmutter, W Low temperature and moisture dependent curing behavior of selected wood adhesives.

INT J ADHES ADHES. 2022; 117, 103178 WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Ramachandrareddy, B; van Herwijnen, HWG; Beck, G; Bredesen, R; Konnerth J (2022): Characterization of flexible melamine-urea-formaldehyde adhesives for CLT applications.
[International Conference on Wood Adhesives, ICWA 2022, Portland, OR, USA, 11.05.2022 - 13.05.2022]

In: Forest Products Society, International Conference on Wood Adhesives, Conference Proceedings

Rosenfeld, C; Sailer-Kronlachner, W; Konnerth, J; Geyer, A; van Herwijnen, H.W.G. (2022): Effect of Hydroxymethylfurfural on the Cure Speed in Fructose-based Adhesives for Interior Particleboards.
[International Conference on Wood Adhesives 2022, Portland, OR, USA, 11.05.2022 - 13.05.2022]

In: Forest Products Society, Wood Adhesives 2022

Sailer-Kronlachner, W; Rosenfeld, C; Bacher, M; Böhmdorfer, S; Konnerth, J; Geyer, A; van Herwijnen, H.W.G, (2022): Development of an in-situ approach towards sustainable, carbohydrate-based adhesives.
[International Conference on Wood Adhesives, Portland, OR, USA, 11.05.2022 - 13.05.2022]

In: Forest Products Society, Wood Adhesives 2022

2021

Journal Articles

** Averina, E; Konnerth, J; D'Amico, S; van Herwijnen, HWG Protein adhesives: Alkaline hydrolysis of different crop proteins as modification for improved wood bonding performance.

IND CROP PROD. 2021; 161, 113187 WoS FullText FullText_BOKU

** Csarman, F; Gusenbauer, C; Wohlschlager, L; van Erven, G; Kabel, MA; Konnerth, J; Potthast, A; Ludwig, R; Non-productive binding of cellobiohydrolase i investigated by surface plasmon resonance spectroscopy..

Cellulose (Lond). 2021; 28(15):9525-9545 WoS PubMed PUBMED Central FullText FullText_BOKU

** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Systematic assessment of wheat extenders in condensation resins for plywood production: Part I-physico-chemical adhesive properties.

J ADHESION. 2021; 97(15): 1404-1422. WoS FullText FullText_BOKU

** Hogger, EM; Van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Systematic assessment of wheat extenders in formaldehyde-condensation plywood resins: part II - mechanical properties of plywood panels.

J ADHESION. 2021; 97(14): 1310-1321. WoS FullText FullText_BOKU

** Pramreiter, M; Stadlmann, A; Huber, C; Konnerth, J; Halbauer, P; Baumann, G; Muller, U The Influence of Thickness on the Tensile Strength of Finnish Birch Veneers under Varying Load Angles.

FORESTS. 2021; 12(1), 87 WoS FullText FullText_BOKU

** Sailer-Kronlachner, W; Thoma, C; Böhmdorfer, S; Bacher, M; Konnerth, J; Rosenau, T; Potthast, A; Solt, P; van Herwijnen, HWG; Sulfuric Acid-Catalyzed Dehydratization of Carbohydrates for the Production of Adhesive Precursors..

ACS Omega. 2021; 6(25):16641-16648 WoS PubMed PUBMED Central FullText FullText_BOKU

** Thoma, C; Solt-Rindler, P; Sailer-Kronlachner, W; Rosenau, T; Potthast, A; Konnerth, J; Pellis, A; van Herwijnen, HWG Carbohydrate-hydroxymethylfurfural-amine adhesives: Chemorheological analysis and rheokinetic study.

POLYMER. 2021; 231, 124128 WoS FullText FullText_BOKU

* Maximilian Pramreiter, Sabine C. Bodner, Jozef Keckes, Alexander Stadlmann, Johannes Konnerth, Florian Feist, Georg Baumann, Christian Huber, Ulrich Müller (2021): Zerstörungsfreie Charakterisierung von Furnieren für strukturelle Verbundwerkstoffe - Evaluierung von Methoden und Einflussfaktoren.

Holztechnologie, 62 (1), 5-18; ISSN 0018-3881

* Thoma, C; Solt, P; Sailer-Kronlachner, W; Rosenau, T; Potthast, A; Konnerth, J; Pellis, A; van Herwijnen, HWG; (2021): Dataset for chemorheological and rheokinetic analysis of carbohydrate-HMF-amine adhesives..

Data Brief. 2021; 39:107465 PubMed PUBMED Central FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J (2021): Factors influencing open-assembly time of polyvinyl acetate (PVAc) adhesives.
[6th International Conference on Structural Adhesive Bonding AB 2021, Porto, Portugal, 08.07.2021 - 09.07.2021]

In: Faculty of Engineering – University of Porto, Book of abstracts, AB2021; ISBN: 978-989-9017-64-1

Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J (2021): Additives as a modification tool for water-based polyvinyl acetate (PVAc) adhesives.
[6th International conference on structural adhesive bonding, Porto, Portugal, 08.07.2021 - 09.07.2021]

In: Faculty of Engineering – University of Porto, Book of abstracts, AB2021; ISBN: 978-989-9017-64-1

Hogger, E M; Konnerth, J; Moser, J; Kantner, W; van Herwijnen, H W G; (2021): Reduction of formaldehyde-based adhesives in plywood production by adding renewable additives.
[First international “Salzburg Conference for Smart Materials”, Kuchl, Austria, 16.09.2021 - 17.09.2021]

In: Alexander Petutschnigg, Nicola Hüsing, Manfred Tscheligi (Eds.), Salzburg Conference for Smart Materials

Jimenez Bartolome, M; Bischof, S; Pellis, A; Konnerth, J; Wimmer, R; Weber, H; Schwaiger, N; Guebitz, G.M.; Nyanhongo, G. S. (2021): Improving polymerized lignin properties using green plasticizers..
[International Conference on Renewable Resources and Biorefineries., Aveiro, Portugal, 06.09.2021 - 08.09.2021]

In: Ghent University, University of Aveiro., 17th International Conference on Renewable Resources and Biorefineries. Biobased solutions for climate change.

Konnerth, J; Huber, C; Bliem, P; Obernosterer, D; Solt-Rindler, P; Jeitler, G; Grabner, M; Müller, U; van Herwijnen, H; Pramreiter, M; (2021): Opportunities and challenges coming with hardwood use for structural applications.
[9th Hardwood Conference 2021, Sopron, Hungary, 24.06.2021 - 25.06.2021]

In: Nemeth, Robert; Rademacher, Peter; Hansmann, Christian; Bak, Miklos; Bader, Matyas; (Eds), 9th Hardwood Proceedings Part I and II, University of Sopron Press FullText

Liebner, F; Plappert, S; Konnerth, J; Nedelec, JM (2021): Transdermal NSAID release patches made from anisotropic 2,3-dicarboxycellulose hydrogel membranes.
[National Spring Meeting of the American Chemical Society ACS 2021 - Macromolecular Chemistry: The Second Century, Online, 05.04.2021 - 30.04.2021]

In: American Chemical Society, ACS Spring 2021 National Meeting “Macromolecular Chemistry: The Second Century” - Book of Abstracts

Thoma, Catherine; Sailer-Kronlachner, Wilfried; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, Hendrikus W. G. (2021): Reactive adhesives derived from carbohydrate-based precursors. [Poster]
[EURADH 2021, Vienna, Austria, 06.10.2021 - 07.10.2021]

In: EFIB (Ed.), EFIB 2021

Thoma, Catherine; Sailer-Kronlachner, Wilfried; Solt-Rindler, Pia, Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, H.W.G. (2021): Lab-scale testing of carbohydrate-based adhesives for wood-based products . [Poster]
[EFIB 2021, Vienna, Austria, 06.10.2021 - 07.10.2021]

In: EFIB (Ed.), EFIB 2021

Thoma, Catherine; Solt-Rindler, Pia; Sailer-Kronlachner, Wilfried; Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Pellis, Alessandro; van Herwijnen, Hendrikus W. G. (2021): Chemorheological analysis and rheokinetic study of carbohydrate-hydroxymethylfurfural-amine adhesive.
[EURADH 2021, Online, 11.10.2021]

In: Sociedad de adhesión (Hrsg.), EURADH 2014 - Proceedings of the Short Abstracts: 10th European Adhesion Conference, 10 - 14 October 2021

2020

Journal Articles

** Bartolome, MJ; Bischof, S; Pellis, A; Konnerth, J; Wimmer, R; Weber, H; Schwaiger, N; Guebitz, GM; Nyanhongo, GS Enzymatic synthesis and tailoring lignin properties: A systematic study on the effects of plasticizers.

POLYMER. 2020; 202, 122725 WoS FullText FullText_BOKU

** Bliem, P; Fromel-Frybort, S; van Herwijnen, HWG; Pinkl, S; Krenke, T; Mauritz, R; Konnerth, J Engineering of material properties by adhesive selection at the example of a novel structural wood material.

J ADHESION. 2020; 96(1-4): 144-164. WoS FullText FullText_BOKU

** Bliem, P; Konnerth, J; Fromel-Frybort, S; Gartner, C; Mauritz, R; van Herwijnen, HWG Influence of drying and curing parameters on phenol-formaldehyde impregnated wood veneers.

J ADHESION. 2020; 96(1-4): 253-271. WoS FullText FullText_BOKU

** Bockel, S; Harling, S; Gronquist, P; Niemz, P; Pichelin, F; Weiland, G; Konnerth, J Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength.

EUR J WOOD WOOD PROD. 2020; 78(3): 449-459. WoS FullText FullText_BOKU

** Bockel, S; Harling, S; Konnerth, J; Niemz, P; Weiland, G; Hogger, E; Pichelin, F Modifying elastic modulus of two-component polyurethane adhesive for structural hardwood bonding.

J WOOD SCI. 2020; 66(1), 69 WoS FullText FullText_BOKU

** Gusenbauer, C; Jakob, DS; Xu, XG; Vezenov, DV; Cabane, E; Konnerth, J Nanoscale Chemical Features of the Natural Fibrous Material Wood.

BIOMACROMOLECULES. 2020; 21(10): 4244-4252. WoS PubMed FullText FullText_BOKU

** Gusenbauer, C; Nypelo, T; Jakob, DS; Xu, XJG; Vezenov, DV; Asaadi, S; Sixta, H; Konnerth, J Differences in surface chemistry of regenerated lignocellulose fibers determined by chemically sensitive scanning probe microscopy.

INT J BIOL MACROMOL. 2020; 165: 2520-2527. WoS FullText FullText_BOKU

** Herzele, S; van Herwijnen, HWG; Griesser, T; Gindl-Altmutter, W; Rossler, C; Konnerth, J Differences in adhesion between 1C-PUR and MUF wood adhesives to (ligno)cellulosic surfaces revealed by nanoindentation.

INT J ADHES ADHES. 2020; 98, 102507 WoS FullText FullText_BOKU

** Huss, JC; Antreich, SJ; Bachmayr, J; Xiao, N; Eder, M; Konnerth, J; Gierlinger, N; Topological Interlocking and Geometric Stiffening as Complementary Strategies for Strong Plant Shells..

Adv Mater. 2020; 32(48):e2004519 WoS PubMed FullText FullText_BOKU

** Kiefer, T; Fussl, J; Kariem, H; Konnerth, J; Gaggl, W; Hellmich, C A multi-scale material model for the estimation of the transversely isotropic thermal conductivity tensor of fired clay bricks.

J EUR CERAM SOC. 2020; 40(15): 6200-6217. WoS FullText FullText_BOKU

** Solt, P; Libowitzky, S; van Herwijnen, HWG; Konnerth, J Improved method for analyzing cohesive strength development of pMDI.

WOOD SCI TECHNOL. 2020; 54(1): 7-17. WoS FullText FullText_BOKU

** Sulaeva, I; Hettegger, H; Bergen, A; Rohrer, C; Kostic, M; Konnerth, J; Rosenau, T; Potthast, A; Fabrication of bacterial cellulose-based wound dressings with improved performance by impregnation with alginate..

Mater Sci Eng C Mater Biol Appl. 2020; 110:110619 WoS PubMed FullText FullText_BOKU

** Thoma, C; Konnerth, J; Sailer-Kronlachner, W; Rosenau, T; Potthast, A; Solt, P; van Herwijnen, HWG Hydroxymethylfurfural and its Derivatives: Potential Key Reactants in Adhesives.

CHEMSUSCHEM. 2020; 13(20): 5408-5422. WoS PubMed FullText FullText_BOKU

** Thoma, C; Konnerth, J; Sailer-Kronlachner, W; Solt, P; Rosenau, T; van Herwijnen, HWG Current Situation of the Challenging Scale-Up Development of Hydroxymethylfurfural Production.

CHEMSUSCHEM. 2020; 13(14): 3544-3564. WoS PubMed FullText FullText_BOKU

** Tran, A; Mayr, M; Konnerth, J; Gindl-Altmutter, W Adhesive strength and micromechanics of wood bonded at low temperature.

INT J ADHES ADHES. 2020; 103, 102697 WoS FullText FullText_BOKU

** Winkler, C; Konnerth, J; Gibcke, J; Schafer, J; Schwarz, U Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers I: mechanical and electrical properties.

J ADHESION. 2020; 96(1-4): 165-184. WoS FullText FullText_BOKU

** Winkler, C; Schafer, J; Jager, C; Konnerth, J; Schwarz, U Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers II: electrical sensitivity in compression.

J ADHESION. 2020; 96(1-4): 185-206. WoS FullText FullText_BOKU

* Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Mauritz, R; Müller, U; Teischinger, A; Konnerth, J (2020): Holzwerkstoff basierend auf Partikeln hergestellt mittels einer neuartigen, nicht schneidenden Zerteilungstechnologie.

Holztechnologie, 61 (3), 30-38; ISSN 0018-3881

* Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J. (2020): Einfluss der Kaltklebrigkeit auf die Vernetzung von Harnstoff-Formaldehyd-Harzen.

Holztechnologie, 61 (3), 43-48; ISSN 0018-3881

* Mohan, T; Dobaj Štiglic, A; Beaumont, M; Konnerth, J; Gürer, F; Makuc, D; Maver, U; Gradišnik, L; Plavec, J; Kargl, R; Stana Kleinschek, K; (2020): Generic Method for Designing Self-Standing and Dual Porous 3D Bioscaffolds from Cellulosic Nanomaterials for Tissue Engineering Applications.

ACS ABM, 3(2), 1197-1209; ISSN 2576-6422 FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Plappert, S; Konnerth, J; Nedelec, JM; Liebner, F (2020): Anisotropic nanocellulose gel membranes for drug delivery: tailoring structure and interface by sequential periodate - chlorite oxidation .
[International Conference on Aerogels for Biomedical and Environmental Applications , Santiago de Compostella, Spain, 18.02.2020 - 20.02.2020]

In: Garcia-Gonzalez, C (Ed.), International Conference on Aerogels for Biomedical and Environmental Applications. Book of Abstracts

Tran, A; Mayr, M; Konnerth, J; Gindl-Altmutter, W (2020): Low Temperature Adhesive Bonding for Structural Wood Materials.
[SWST International Convention 2020, Online, 12.07.2020 - 15.07.2020]

In: Susan LeVan-Green, Proceedings of the 2020 Society of Wood Science and Technology International Convention

2019

Journal Articles

** Bader, M; Nemeth, R; Konnerth, J Micromechanical properties of longitudinally compressed wood.

EUR J WOOD WOOD PROD. 2019; 77(3): 341-351. WoS FullText FullText_BOKU

** Bockel, S; Mayer, I; Konnerth, J; Harling, S; Niemz, P; Swaboda, C; Beyer, M; Bieri, N; Weiland, G; Pichelin, F The role of wood extractives in structural hardwood bonding and their influence on different adhesive systems.

INT J ADHES ADHES. 2019; 91: 43-53. WoS FullText FullText_BOKU

** Gusenbauer, C; Cabane, E; Gierlinger, N; Colson, J; Konnerth, J; Visualization of the Stimuli-responsive Surface Behavior of Functionalized Wood Material by Chemical Force Microscopy..

Sci Rep. 2019; 9(1):18569 WoS PubMed FullText FullText_BOKU

** Hogger, E; Bauer, K; Hollbacher, E; Gierlinger, N; Konnerth, J; van Herwijnen, HWG Time-dependent ammonia emissions from fumed oak wood determined by micro-chamber/thermal extractor (mu CTE) and FTIR-ATR spectroscopy.

HOLZFORSCHUNG. 2019; 73(2): 165-170. WoS FullText FullText_BOKU

** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Influence of cold tack properties on bond performance of cured urea-formaldehyde resin.

EUR J WOOD WOOD PROD. 2019; 77(3): 487-490. WoS FullText FullText_BOKU

** Plappert, SF; Liebner, FW; Konnerth, J; Nedelec, JM Anisotropic nanocellulose gel-membranes for drug delivery: Tailoring structure and interface by sequential periodate-chlorite oxidation.

CARBOHYD POLYM. 2019; 226, UNSP 115306 WoS PubMed FullText FullText_BOKU

** Rindler, A; Hansmann, C; Konnerth, J The effect of moisture on the mechanical response of wood, adhesive and their interphase by means of nanoindentation.

WOOD SCI TECHNOL. 2019; 53(4): 729-746. WoS FullText FullText_BOKU

** Rindler, A; Vay, O; Hansmann, C; Konnerth, J Adhesive-related warping of thin wooden bi-layers.

WOOD SCI TECHNOL. 2019; 53(5): 1015-1033. WoS FullText FullText_BOKU

** Shah, DU; Konnerth, J; Ramage, MH; Gusenbauer, C Mapping thermal conductivity across bamboo cell walls with scanning thermal microscopy.

SCI REP-UK. 2019; 9, 16667 WoS PubMed FullText FullText_BOKU

** SOlt, P; Konnerth, J; Gindl-Altmutter, W; Kantner, W; Moser, J; Mitter, R; van Herwijnen, HWG Technological performance of formaldehyde-free adhesive alternatives for particleboard industry.

INT J ADHES ADHES. 2019; 94: 99-131. WoS FullText FullText_BOKU

** Solt, P; van Herwijnen, HWG; Konnerth, J Thermoplastic and moisture-dependent behavior of lignin phenol formaldehyde resins.

J APPL POLYM SCI. 2019; 136(40), 48011 WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Averina, E; van Herwijnen, HWG; Konnerth, J; (2019): Wood adhesives based on domestic plant proteins.
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

Bliem, P; Frömel-Frybort, S; Gartner, C; Konnerth, J; Mauritz, R; van Herwijnen, HWG; (2019): Optimisation of drying and curing parameters of PF impregnated wood.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]

In: Faculty of Engineering – University of PortoPorto, Portugal, AB2019

Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Krenke, T; Mauritz, R; Konnerth, J; (2019): Engineering of material properties by adhesive selection at the example of a novel structural wood material.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]

In: Faculty of Engineering – University of PortoPorto, Portugal, AB2019

Bliem, P; Gartner, C; Konnerth, J; Solt, P; Mauritz, R; van Herwijnen, HWG; (2019): Knowledge-based Curing of Phenolic Wood Adhesives. .
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

Budjav, E; Ghorbani, M; Konnerth, J; Mitterer, C; Unterweger, C; Rigacci, A; Ilbizian, P; Rennhofer, H; Lichtenegger, H; Bernstorff, S; Liebner, F (2019): Thermal superinsulating monolithic lignin-phenol-formaldehyde aerogels and carbon aerogels of high internal surface . [Poster]
[1st International Lignin Symposium, Sapporo, Japan, 13.09.2019 - 15.09.2019]

In: Hokkaido University, 1st International Lignin Symposium, Book of Abstracts

Claudia Gusenbauer, Tiina Nypelö, Etienne Cabane, Johannes Konnerth (2019): Force Microscopy to reveal chemical properties of lignocellulosic materials up to the nanometer scale .
[The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC), Tokyo, Japan, 09.09.2019 - 11.09.2019]

In: The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC), Book of Abstracts

Elfriede Hogger, Hendrikus W. G. van Herwijnen, Wolfgang Kantner, Johann Moser, Johannes Konnerth (2019): The importance of cold tack of urea formaldehyde in plywood production.
[15th Annual Meeting of the Northern European Network for Wood Science and Engineering, WSE , Lund, Sweden, 09.10.2019 - 10.10.2019]

In: Maria Fredriksson, Proceedings of the 15th Annual Meeting of the Northern European Network for Wood Science and Engineering - WSE2019

Konnerth, J; Colson, J; Pettersson, T; Nypelö, T; Sixta, H; Shirin, A; Kneidinger, G; Gusenbauer, C; (2019): Surface and adhesion properties of lignocellulosic model fibers..
[The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC), Tokyo, Japan, 09.09.2019 - 11.09.2019]

In: The University of Tokyo, The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC)

Rindler, A; Vay, O; Hansmann, C; Konnerth, J; (2019): Adhesive related warping of thin wooden bi-layers.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]

In: Faculty of Engineering – University of PortoPorto, Portugal, AB2019

Sailer-Kronlachner, W; Thoma, C; Solt, P; Konnerth, J; van Herwijnen, HWG; (2019): Development of novel carbohydrate-based binders for wood composites.
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

Thoma, C.; Sailer-Kronlachner, W.; Solt, P.; Konnerth, J.; van Herwijnen, H.W.G. (2019): Hydroxymethylfurfural: Production and application in binder-systems. [Poster]
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, , 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies , September 24 - 27, 2019, Linz/Austria

Thoma, C; Sailer-Kronlachner, W; Solt, P; Konnerth, J; van Herwijnen, HWG; (2019): Hydroxymethylfurfural: production and application in binder-systems.
[18. Österreichische Chemietage 2019, Linz, Austria, 24.09.2019 - 27.09.2019]

In: Austrian Chemical Society and the Johannes-Kepler-University, 18. Österreichische Chemietage 2019 Joint Meeting of the German & Austrian Chemical Societies September 24 - 27, 2019, Linz/Austria

Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U; (2019): Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers II: Electrical properties. .
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]

In: Faculty of Engineering – University of PortoPorto, Portugal, AB2019

Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U; (2019): Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers I: Mechanical properties.
[5th International conference on structural adhesive bonding, Porto, Portugal, 11.07.2019 - 12.07.2019]

In: Faculty of Engineering – University of PortoPorto, Portugal, AB2019

2018

Journal Articles

** Bliem, P; van Herwijnen, HWG; Riegler, M; Konnerth, J Investigation of important influencing factors on the tensile shear strength of two component polyurethane with distinct foaming behaviour.

INT J ADHES ADHES. 2018; 84: 343-349. WoS FullText FullText_BOKU

** Bockel, S; Mayer, I; Konnerth, J; Niemz, P; Swaboda, C; Beyer, M; Harling, S; Weiland, G; Bieri, N; Pichelin, F Influence of wood extractives on two-component polyurethane adhesive for structural hardwood bonding.

J ADHESION. 2018; 94(10): 829-845. WoS FullText FullText_BOKU

** Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelo, T; Mautner, A; Konnerth, J Adhesion properties of regenerated lignocellulosic fibres towards poly (lactic acid) microspheres assessed by colloidal probe technique.

J COLLOID INTERF SCI. 2018; 532: 819-829. WoS PubMed FullText FullText_BOKU

** Ghorbani, M; Konnerth, J; van Herwijnen, HWG; Zinovyev, G; Budjav, E; Silva, AR; Liebner, F Commercial lignosulfonates from different sulfite processes as partial phenol replacement in PF resole resins.

J APPL POLYM SCI. 2018; 135(8): WoS FullText FullText_BOKU

** Ghorbani, M; Liebner, F; van Herwijnen, HWG; Solt, P; Konnerth, J Ligneous resole adhesives for exterior-grade plywood.

EUR J WOOD WOOD PROD. 2018; 76(1): 251-258. WoS FullText FullText_BOKU

** Ghorbani, M; Mahendran, AR; van Herwijnen, HWG; Liebner, F; Konnerth, J Paper-based laminates produced with kraft lignin-rich phenol-formaldehyde resoles meet requirements for outdoor usage.

EUR J WOOD WOOD PROD. 2018; 76(2): 481-487. WoS FullText FullText_BOKU

** Herzele, S; van Herwijnen, HWG; Edler, M; Gindl-Altmutter, W; Konnerth, J Cell-layer dependent adhesion differences in wood bonds.

COMPOS PART A-APPL S. 2018; 114: 21-29. WoS FullText FullText_BOKU

** Hogger, EM; van Herwijnen, HWG; Moser, J; Kantner, W; Konnerth, J Cold tack of urea formaldehyde resins as an important factor in plywood production.

EUR J WOOD WOOD PROD. 2018; 76(5): 1391-1398. WoS FullText FullText_BOKU

** Lutkemeier, B; Konnerth, J; Militz, H Distinctive Impact of Processing Techniques on Bonding Surfaces of Acetylated and Heat-Treated Beech Wood and Its Relation to Bonding Strength.

FOREST PROD J. 2018; 68(4): 372-382. WoS FullText FullText_BOKU

** Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T Self-Standing Nanocellulose Janus-Type Films with Aldehyde and Carboxyl Functionalities.

BIOMACROMOLECULES. 2018; 19(3): 973-979. WoS PubMed FullText FullText_BOKU

** Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J Conversion of wood-biopolymers into macrofibers with tunable surface energy via dry-jet wet-spinning.

CELLULOSE. 2018; 25(9): 5297-5307. WoS PubMed FullText FullText_BOKU

** Plappert, SF; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, HC; Liebner, FW Conformal Ultrathin Coating by scCO(2)-Mediated PMMA Deposition: A Facile Approach To Add Moisture Resistance to Lightweight Ordered Nanocellulose Aerogels.

CHEM MATER. 2018; 30(7): 2322-2330. WoS FullText FullText_BOKU

** Rindler, A; Poll, C; Hansmann, C; Muller, U; Konnerth, J Moisture related elastic and viscoelastic behaviour of wood adhesives by means of in-situ nanoindentation.

INT J ADHES ADHES. 2018; 85: 123-129. WoS FullText FullText_BOKU

** Solt, P; Jaaskelainen, AS; Lingenfelter, P; Konnerth, J; van Herwijnen, HWG Impact of Molecular Weight of Kraft Lignin on Adhesive Performance of Lignin-Based Phenol-Formaldehyde Resins.

FOREST PROD J. 2018; 68(4): 365-371. WoS FullText FullText_BOKU

** Solt, P; Rossiger, B; Konnerth, J; van Herwijnen, HWG Lignin Phenol Formaldehyde Resoles Using Base-Catalysed Depolymerized Kraft Lignin.

POLYMERS-BASEL. 2018; 10(10): WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

** Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T Polysaccharide film as a ductile substrate for gas phase treatment.
[255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water, New Orleans, LA, USA, 18.03.2018 - 22.03.2018]

ABSTR PAP AM CHEM S. 2018; 255: WoS

** Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J Tunable surface energy wood-biopolymer macrofibers.
[255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water, New Orleans, LA, USA, 18.03.2018 - 22.03.2018]

ABSTR PAP AM CHEM S. 2018; 255: WoS

** Plappert, S; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, FW Imparting moisture resistance to transparent nematic i-CNF aerogels by scCO2-antisolvent coating of the interior with ultrathin PMMA layers.
[255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water, New Orleans, LA, USA, 18.03.2018 - 22.03.2018]

ABSTR PAP AM CHEM S. 2018; 255: WoS

Bockel, S; Harling, S; Konnerth, J; Niemz, P; Pichelin, F; (2018): Structural hardwood bonding and the impact of wood accessory compounds.
[8th Hardwood Conference 2018, Sopron, Hungary, 25.10.2018 - 26.10.2018]

In: Róbert Németh, Alfred Teischinger, Peter Rademacher, Miklós Bak (Eds.), 8TH HARDWOOD CONFERENCE WITH SPECIAL FOCUS ON “NEW ASPECTS OF HARDWOOD UTILIZATION - FROM SCIENCE TO TECHNOLOGY” HARDWOOD CONFERENCE PROCEEDINGS VOLUME 8 FullText

Budjav, E; Requejo-Silva, A; Ghorbani, M; Konnerth, J; Liebner, F (2018): Thermo-induced gelation of ligneous resole resins: An approach towards mesoporous monolithic aerogels and carbon aerogels. [Poster]
[1st Vienna Polymer-Group Symposium ViP 2018, Vienna, Austria, 27.02.2018]

In: Vienna University, 1st Vienna Polymer-Group Symposium (ViP), Book of Abstracts

Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelö, T; Konnerth, J (2018): Colloidal probe technique applied to the assessment of adhesion forces between lignocellulosic fibres and polymers.
[16th Conference of the International Association of Colloid and Interface Scientists (IACIS), Rotterdam, Netherlands, 21.05.2018 - 25.05.2018]

In: International Association of Colloid and Interface Scientists, Proceedings of the 16th Conference of the International Association of Colloid and Interface Scientists (IACIS)

Gusenbauer, C; Colson, J; Nypelö, T; Cabane, E; Konnerth, J; (2018): Chemical Force Microscopy for characterising functionalised renewable materials..
[Wood Nanotechnology Conference 2018, Ascona, Switzerland, 02.09.2018 - 05.09.2018]

In: ETH Zürich, Wood Nanotechnology 2018

Hogger, E; Bauer, K; Höllbacher, E; Gierlinger, N; Konnerth, J; van Herwijnen H W G; (2018): Monitoring of time dependent ammonia emissions in smoked oak using FTIR spectroscopy..
[8th Hardwood Conference 2018, Sopron, Hungary, 25.10.2018 - 26.10.2018]

In: Róbert Németh, Alfred Teischinger, Peter Rademacher, Miklós Bak (Eds.), Hardwood Conference Proceedings Volume 8; ISBN: 978-963-359-096-6

Plappert, S; Quraishi, S; Nedelec, J-M; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, F (2018): Conformal ultrathin coating by scCO2-mediated PMMA deposition: A facile approach to add moisture resistance to lightweigth ordered nanocellulose aerogels. [Poster]
[1st Vienna Polymer-Group Symposium ViP 2018, Vienna, Austria, 27.02.2018]

In: Vienna University, 1st Vienna Polymer-Group Symposium (ViP), Book of Abstracts

2017

Journal Articles

** Colson, J; Andorfer, L; Nypelo, TE; Lutkemeier, B; Stockel, F; Konnerth, J Comparison of silicon and OH-modified AFM tips for adhesion force analysis on functionalised surfaces and natural polymers.

COLLOID SURFACE A. 2017; 529: 363-372. WoS FullText FullText_BOKU

** Ghorbani, M; Konnerth, J; Budjav, E; Silva, AR; Zinovyev, G; van Herwijnen, HWG; Edler, M; Griesser, T; Liebner, F Ammoxidized Fenton-Activated Pine Kraft Lignin Accelerates Synthesis and Curing of Resole Resins.

POLYMERS-BASEL. 2017; 9(2): WoS FullText FullText_BOKU

** Winter, A; Andorfer, L; Herzele, S; Zimmermann, T; Saake, B; Edler, M; Griesser, T; Konnerth, J; Gindl-Altmutter, W Reduced polarity and improved dispersion of microfibrillated cellulose in poly(lactic-acid) provided by residual lignin and hemicellulose.

J MATER SCI. 2017; 52(1): 60-72. WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

** Budjav, E; Quraishi, S; Ghorbani, M; Konnerth, J; Unterweger, C; Liebner, FW Synthesis, properties and carbonization of different types of ligneous aerogels.
[253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes, San Francisco, CA, USA, 02.04.2017 - 06.04.2017]

ABSTR PAP AM CHEM S. 2017; 253: WoS

** Nypelo, T; Amer, H; Laine, C; Tammelin, T; Konnerth, J; Henniges, U; Potthast, A; Rosenau, T Wood-based hemicelluloses as renewable source for functional materials.
[253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes, San Francisco, CA, USA, 02.04.2017 - 06.04.2017]

ABSTR PAP AM CHEM S. 2017; 253: WoS

Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Konnerth, J; Liebner, F (2017): Thermo-induced gelation of diluted ligneous resole resin pre-condensates in ethylene glycol: A facile approach towards highly open mesoporous monolithic aerogels and carbon aerogels.
[International Conference Renewable Plant Resources 2017 - Chemistry, Technology, Medicine, St. Petersburg, Russian Federation, 18.09.2017 - 22.09.2017]

In: Saint Petersburg State Forest Technical University, 2017 International Conference: Renewable Plant Resources - Chemistry, Technology, Medicine. Book of Abstracts

Herzele, S; van Herwijnen, HWG; Gindl-Altmutter, W; Konnerth, J; (2017): Local adhesion testing on lignocellulosic fibers with Nanoindentation..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]

In: Forest Products Society, Wood adhesives 2017

Hogger, E; Konnerth, J; van Herwijnen, HWG; (2017): Influencing Factors On The Cold Tack Of Urea Formaldehyde Used For Birch Plywood.
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]

In: Forest Products Society, Wood adhesives 2017

Hogger, E; van Herwijnen, H. W. G; Moser, J; Kantner, W; Konnerth, J; (2017): Analysis of the cold tack of urea formaldehyde resin as an important factor in birch plywood production. .
[International Panel Products Symposium (IPPS), Llandudno, UK, 04.10.2017 - 05.10.2017]

In: Spear, Morwenna (Hrsg.), Proceedings of the International Panel Productions Symposium 2017; ISBN: 978-1-84220-154-1

Konnerth, J; Colson, J; Kneidinger, G; Asaadi, S; Sixta, H; Gindl-Altmutter, W; Nypelö, TE; (2017): Comparison of direct adhesion of thermoplastic polymers to lignocellulosic model fibers..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]

In: Forest Products Society, Wood adhseisves 2017

Rindler, A; Hansmann, C; Müller, U; Konnerth, J (2017): Dimensional stability of wood based panels - Contibutions of the adhesive .
[IUFRO Division 5 Conference, SWST 60th International Convention 2017, Vancouver, BC, Canada, 12.06.2017 - 16.06.2017]

In: IUFRO, University of Britisch Columbia, FPInnovations, Society Wood Science & Technology, IUFRO Division 5 Conference, Final Program, Proceedings and Abstract; ISBN: 978-0-9817876-7-1

Rindler, A; Konnerth, J; Hansmann, C; Müller, U (2017): Mechanical contribution of the adhesive layer to the dimensional stability of multi-layered wood based panels. .
[CompWood 2017, Vienna, Austria, 02.06.2017 - 07.06.2017]

In: TU Verlag, IMWS Vienna University of Technology, The CompWood 2017 Programme & Book of Abstracts; ISBN: 9783903024496

Rindler, A; Konnerth, J; Müller, U (2017): Dimensional stability – Contributions of the adhesive layer.
[IUFRO Division 5 Conference, SWST 60th International Convention 2017, Vancouver, BC, Canada, 12.06.2017 - 16.06.2017]

In: IUFRO Division 5, IUFRO Division 5 Conference, Final Program, Proceedings, Abstracts; ISBN: 978–0–9817876–7-1

Solt, P; Konnerth, J; van Herwijnen, HWG; (2017): The impact of molecular weight of Kraft-lignin on adhesive performance of lignin based phenol formaldehyde resins..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]

In: Forest Products Society, Wood adhesives 2017

Solt, P; Libowitzky, S; van Herwijnen, HWG; Konnerth, J; (2017): Effect of pressing temperature and moisture content on the curing properties of pMDI. [Poster]
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]

In: Forest Products Society, Wood adhesives 2017

van Herwijnen, HWG; Solt, P; Gindl-Altmutter, W; Konnerth, J; (2017): Comparable technological evaluation of formaldehyde-free adhesives for the particle board production..
[11th International Conference on Wood Adhesives, Atlanta, GA, USA, 25.10.2017 - 27.10.2017]

In: Forest Products Society, Wood adhesives 2017

2016

Journal Articles

** Ghorbani, M; Liebner, F; van Herwijnen, HWG; Pfungen, L; Krahofer, M; Budjav, E; Konnerth, J Lignin Phenol Formaldehyde Resoles: The Impact of Lignin Type on Adhesive Properties.

BIORESOURCES. 2016; 11(3): 6727-6741. WoS FullText FullText_BOKU

** Konnerth, J; Kluge, M; Schweizer, G; Miljkovic, M; Gindl-Altmutter, W Survey of selected adhesive bonding properties of nine European softwood and hardwood species.

EUR J WOOD WOOD PROD. 2016; 74(6): 809-819. WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

** Konnerth, J; Ghorbani, M; Van Herwijnen, H; Budjav, E; Liebner, FW Performance of lignin-phenol-formaldehyde adhesives using various lignin sources.

ABSTR PAP AM CHEM S. 2016; 251: WoS

** Nypelo, T; Laine, C; Henniges, U; Konnerth, J; Tammelin, T Structure-property relation established by chemical mapping of cellulose nanofibril films containing renewable additives.

ABSTR PAP AM CHEM S. 2016; 251: WoS

Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Liebner, F (2016): Step-reaction vs. chain-reaction polymerization of lignin: two facile approaches towards lignin aerogels and carbon aerogels.
[3rd International Aerogel Seminar, Sophia Antipolis, France, 22.09.2016 - 23.09.2016]

In: International Society for the Advancement of Supercritical Fluids, 3rd International Aerogel Seminar, Proceedings

Budjav, E; Requejo, A; Ghorbani, M; Konnerth, J; Liebner, F (2016): Thermo-induced gelation of ligneous resole resin pre-condensates in ethylene glycol: An approach towards mesoporous monolithic aerogels of high internal surface. [Poster]
[14th European Workshop on Lignocellulosics and Pulp, Autrans, France, 28.06.2016 - 01.06.2016]

In: Chirat, C (Ed.), 14th European Workshop on Lignocellulosics and Pulp, Proceedings, 193-196

Ghorbani, M; Liebner, F; van Herwijnen, E; Konnerth, J (2016): Lignin phenol formaldehyde resole resin: Synthesis and characteristics.
[4th Symposium on Biotechnology applied to Lignocelluloses, Madrid, Spain, 19.06.2016 - 22.06.2016]

In: Chirat, C (Ed.) , 14th European Workshop on Lignocellulosics and Pulp

Grüll, G; Wegscheider, A; Konnerth, J; Teischinger, A; Neumüller, A (2016): Planing quality of glulam lamellae and its impact on bonding quality and fracture surface characteristics.
[World Conference on Timber Engineering WCTE 2016, Vienna, Austria, 22.08.2016 - 25.08.2016]

In: J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll,, CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016); ISBN: 978-3-903039-00-1

Konnerth, J; Ghorbani, M; Van Herwijnen, E; Budjav, E; Liebner, F; (2016): Performance of Lignin-Phenol-Formaldehyde Adhesives using various Lignin sources.
[American Chemical Society, 251st National Meeting, San Diego, CA, USA, 13.03.2016 - 17.03.2016]

In: American Chemical Society, 251st ACS American Chemical Society National Meeting & Exposition Computers in Chemistry, http://www.acs.org/content/acs/en/meetings/spring-2016.html#acssandiego

Lütkemeier, B.; Konnerth, J.; Militz, H. (2016): Bonding performance of modified wood - distinctive influence of plasma pre-treatments on bonding strength.
[World Conference on Timber Engineering WCTE 2016, Vienna, Austria, 22.08.2016 - 25.08.2016]

In: Eds.: J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll, , CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016); ISBN: 978-3-903039-00-1

Mueller, U; Vay, O; Martinez-Conde, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A (2016): Converting wood into timber and particles - new approaches .
[World Conference on Timber Engineering WCTE 2016, Vienna, Austria, 22.08.2016 - 25.08.2016]

In: J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Eds.), CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016); ISBN: 978-3-903039-00-1

Nypelö, T; Andorfer, L; Konnerth, J (2016): Adhesion force measurements applied to wood-based materials. [Poster]
[14th European Workshop on Lignocellulosics and Pulp, Autrans, France, 28.06.2016 - 01.06.2016]

In: Chirat, C (Ed.), 14th European Workshop on Lignocellulosics and Pulp, Proceedings, 51-54

Nypelö, T; Andorfer, L; Konnerth, J (2016): AFM adhesion force measurements applied to wood-based materials I. [Poster]
[IX Iberoamerican Congress on Pulp and Paper Research "Building bridges in research and innovation for the sustainable bioeconomy" September 4-8, 2016, Espoo, Finland, 04.09.2016 - 08.09.2016]

In: Red Iberoamericana de Docencia de Investigación en Celulosa y Papel, IX Iberoamerican Congress on Pulp and Paper Research, Book of Abstracts

Nypelö, T; Laine, C; Henniges, U; Konnerth, J; Tammelin, T (2016): Structure-property relation of films of cellulose nanofibrils containing renewable additives established by chemical mapping.
[251st National Spring Meeting of the American Chemical Society ACS 2016, San Diego, CA, USA, 13.03.2016 - 17.03.2016]

In: American Chemical Society, 251th ACS National Spring Meeting & Exposition, Book of Abstracts

2015

Journal Articles

** Müller, U; Gindl-Altmutter, W; Konnerth, J; Maier, GA; Keckes, J; Synergy of multi-scale toughening and protective mechanisms at hierarchical branch-stem interfaces..

Sci Rep. 2015; 5:14522 WoS PubMed PUBMED Central FullText FullText_BOKU

* Müller, U., Vay, O., Martinez-Conde Lopez, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A. (2015): Innovative mechanische Trenntechnologien von Holz.

Holztechnologie, 56, 29-34; ISSN 0018-3881

Conference & Workshop Proceedings, Paper, Abstract

Ghorbani, M; Liebner, F; Van Herwijnen, E; Pfungen, L; Krahofer, M; Konnerth, J; (2015): Synthesis and Characteristics of Lignin-Phenol-Formaldehyde Resole Adhesives. , Sept. 09-11, Vienna, Austria. [Poster]
[18th International Symposium on Wood, Fiber and Pulping Chemistry ISWFPC 2015, Vienna, Austria, 09.09.2015 - 11.09.2015]

In: BOKU, Department of Chemistry, 2015 J. Hell, S. Böhmdorfer, A. Potthast, T. Rosenau (eds.), 18th ISWFPC International Symposium on Wood, Fibre and Pulping Chemistry Proceedings Vol. II; ISBN: 978-3-900932-24-4

Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J. Teischinger, A. (2015): Neue Wege im mechanischen Holzaufschluss - alternative Technologien, Energieeinsparung und Ressourceneffizienz .
[Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien, Regensburg, Germany, 12.11.2015]

In: Bayern Innovativ Bayerisches Staatsministerium für Wirtschaft und Medien, Energie und Technologie, Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien

2014

Journal Articles

** Ammann, S; Obersriebnig, M; Konnerth, J; Gindl-Altmutter, W; Niemz, P Comparative adhesion analysis at glue joints in European beech and Norway spruce wood by means of nanoindentation.

INT J ADHES ADHES. 2014; 50: 45-49. WoS FullText FullText_BOKU

** Beaugrand, J; Nottez, M; Konnerth, J; Bourmaud, A Multi-scale analysis of the structure and mechanical performance of woody hemp core and the dependence on the sampling location.

IND CROP PROD. 2014; 60: 193-204. WoS FullText FullText_BOKU

** Frybort, S; Obersriebnig, M; Muller, U; Gindl-Altmutter, W; Konnerth, J Variability in surface polarity of wood by means of AFM adhesion force mapping.

COLLOID SURFACE A. 2014; 457: 82-87. WoS FullText FullText_BOKU

** Keplinger, T; Konnerth, J; Aguie-Beghin, V; Ruggeberg, M; Gierlinger, N; Burgert, I A zoom into the nanoscale texture of secondary cell walls.

PLANT METHODS. 2014; 10: WoS PubMed PUBMED Central FullText FullText_BOKU

** Konnerth, J; Weigl, M; Gindl-Altmutter, W; Avramidis, G; Wolkenhauer, A; Viol, W; Gilge, M; Obersriebnig, M Effect of plasma treatment on cell-wall adhesion of urea-formaldehyde resin revealed by nanoindentation.

HOLZFORSCHUNG. 2014; 68(6): 707-712. WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A., (2014): Innovative Trenn- und Aufteiltechnologien.
[16. Holztechnologisches Kolloquium, Dresden, Dresden, Germany, 03.04.2014 - 04.04.2014]

In: Technische Universität Dresden, Institut für Holz- und Papiertechnik, Tagungsband des 16. holztechnologischen Kolloquiums, Dresden, TU Dresden, Schriftenreihe Holz- und Papiertechnik, Band 12, ISBN 978-3-86780-385-4, S. 113-120

U. Müller, J. Konnerth, W. Gindl-Altmutter, D. Kaserer, J. Keckes (2014): Stamm-Astanbindung – eine biologisch optimierte Struktur mit hoher mechanischer Leistungsfähigkeit.
[Grazer Holzbau-Fachtagung - GraHFT 2014, Graz, Austria, 26.09.2014]

In: Brandner, R. , Bionische Tragstrukturen im Holzbau - Grazer Holzbau-Fachtagung - GraHFT 2014, Institut für Holzbau und Holztechnologie, Technische Universität Graz 978-3-85125-368-9

Vay, O., Konnerth, J., Frybort, S., Krenke, T., Teischinger, A., Müller, U. (2014): Cross industry Innovation process to identify "new" Technologies for mechanical Wood disintegration. [Poster]
[57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference, Zvolen, Slovak Republic, 23.06.2014 - 27.06.2014]

In: Society of Wood Science and Technology, Monona, WI, US, 57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference, p 909-913, ISBN 978-0-9817876-4-0

2013

Journal Articles

** Obersriebnig, M; Konnerth, J; Gindl-Altmutter, W Evaluating fundamental position-dependent differences in wood cell wall adhesion using nanoindentation.

INT J ADHES ADHES. 2013; 40: 129-134. WoS FullText FullText_BOKU

** Stoeckel, F; Konnerth, J; Gindl-Altmutter, W Mechanical properties of adhesives for bonding wood-A review.

INT J ADHES ADHES. 2013; 45: 32-41. WoS FullText FullText_BOKU

** Vay, O; Obersriebnig, M; Muller, U; Konnerth, J; Gindl-Altmutter, W Studying thermal conductivity of wood at cell wall level by scanning thermal microscopy (SThM).

HOLZFORSCHUNG. 2013; 67(2): 155-159. WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Konnerth, J; Obersriebnig, M; Frybort, S; Gindl-Altmutter, W; (2013): Nanoindentation for direct evaluation of adhesion at the cell wall-adhesive interface & AFM-based polarity characterization of wood surfaces.
[Int. Conference on Wood Adhesives, Toronto, Ontario, Canada, 09.10.2013 - 11.10.2013]

In: Forest Products Society, International Conference on Wood Adhesives 2013, ISBN: 987-0-935018-37-0

2012

Journal Articles

** Gindl-Altmutter, W; Muller, U; Konnerth, J The significance of lap-shear testing of wood adhesive bonds by means of Volkersen's shear lag model.

EUR J WOOD WOOD PROD. 2012; 70(6): 903-905. WoS FullText FullText_BOKU

** Konnerth, J; Muller, U; Gindl, W; Buksnowitz, C Reliability of wood adhesive bonds in a 50 year old glider construction.

EUR J WOOD WOOD PROD. 2012; 70(1-3): 381-384. WoS FullText FullText_BOKU

** Obersriebnig, M; Veigel, S; Gindl-Altmutter, W; Konnerth, J Determination of adhesive energy at the wood cell-wall/UF interface by nanoindentation (NI).

HOLZFORSCHUNG. 2012; 66(6): 781-787. WoS FullText FullText_BOKU

** Rathke, J; Muller, U; Konnerth, J; Sinn, G Strain Measurements within Fibreboard. Part III: Analyzing the Process Zone at the Crack Tip of Medium Density Fiberboards (MDF) Double Cantilever I-Beam Specimens.

MATERIALS. 2012; 5(11): 2190-2204. WoS FullText FullText_BOKU

** Rathke, J; Sinn, G; Konnerth, J; Muller, U Strain Measurements within Fiber Boards. Part I: Inhomogeneous Strain Distribution within Medium Density Fiberboards (MDF) Loaded Perpendicularly to the Plane of the Board.

MATERIALS. 2012; 5(6): 1115-1124. WoS FullText FullText_BOKU

** Sinn, G; Muller, U; Konnerth, J; Rathke, J Strain Measurements within Fibre Boards. Part II: Strain Concentrations at the Crack Tip of MDF Specimens Tested by the Wedge Splitting Method.

MATERIALS. 2012; 5(8): 1495-1507. WoS FullText FullText_BOKU

** Stockel, F; Konnerth, J; Moser, J; Kantner, W; Gindl-Altmutter, W Micromechanical properties of the interphase in pMDI and UF bond lines.

WOOD SCI TECHNOL. 2012; 46(4): 611-620. WoS FullText FullText_BOKU

Habilitation Thesis

Johannes Konnerth (2012): Mechanical characteristics of Wood Adhesive Bonds.

, 194; Universität für Bodenkultur Wien; Habilitation im Fach Wood Material Science

2011

Journal Articles

** Jager, A; Hofstetter, K; Buksnowitz, C; Gindl-Altmutter, W; Konnerth, J Identification of stiffness tensor components of wood cell walls by means of nanoindentation.

COMPOS PART A-APPL S. 2011; 42(12): 2101-2109. WoS FullText FullText_BOKU

** Valla, A; Konnerth, J; Keunecke, D; Niemz, P; Muller, U; Gindl, W Comparison of two optical methods for contactless, full field and highly sensitive in-plane deformation measurements using the example of plywood.

WOOD SCI TECHNOL. 2011; 45(4): 755-765. WoS FullText FullText_BOKU

* Hansmann, C; Konnerth, J; Rosner, S (2011): Digital image analysis of radial shrinkage of fresh spruce (Picea abies L.) wood..

Wood Mater Sci Eng. 2011; 6(1-2):2-6 PubMed PUBMED Central FullText FullText_BOKU

2010

** Buksnowitz, C; Hackspiel, C; Hofstetter, K; Muller, U; Gindl, W; Teischinger, A; Konnerth, J Knots in trees: strain distribution in a naturally optimised structure.

WOOD SCI TECHNOL. 2010; 44(3): 389-398. WoS FullText FullText_BOKU

** Follrich, J; Stockel, F; Konnerth, J Macro- and micromechanical characterization of wood-adhesive bonds exposed to alternating climate conditions.

HOLZFORSCHUNG. 2010; 64(6): 705-711. WoS FullText FullText_BOKU

** Gierlinger, N; Luss, S; König, C; Konnerth, J; Eder, M; Fratzl, P Cellulose microfibril orientation of Picea abies and its variability at the micron-level determined by Raman imaging..

J Exp Bot. 2010; 61(2):587-595 WoS PubMed PUBMED Central FullText FullText_BOKU

** Gindl, W; Emsenhuber, G; Plackner, J; Konnerth, J; Keckes, J; Converse piezoelectric effect in cellulose I revealed by wide-angle X-ray diffraction..

Biomacromolecules. 2010; 11(5):1281-1285 WoS PubMed FullText FullText_BOKU

** Konnerth, J; Eiser, M; Jager, A; Bader, TK; Hofstetter, K; Follrich, J; Ters, T; Hansmann, C; Wimmer, R Macro- and micro-mechanical properties of red oak wood (Quercus rubra L.) treated with hemicellulases.

HOLZFORSCHUNG. 2010; 64(4): 447-453. WoS FullText FullText_BOKU

** Konnerth, J; Stockel, F; Muller, U; Gindl, W Elastic Properties of Adhesive Polymers. III. Adhesive Polymer Films Under Dry and Wet Conditions Characterized by Means of Nanoindentation.

J APPL POLYM SCI. 2010; 118(3): 1331-1334. WoS FullText FullText_BOKU

** Rosner, S; Konnerth, J; Plank, B; Salaberger, D; Hansmann, C Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood.

TREES-STRUCT FUNCT. 2010; 24(5): 931-940. WoS PubMed PUBMED Central FullText FullText_BOKU

** Stockel, F; Konnerth, J; Kantner, W; Moser, J; Gindl, W Tensile shear strength of UF- and MUF-bonded veneer related to data of adhesives and cell walls measured by nanoindentation.

HOLZFORSCHUNG. 2010; 64(3): 337-342. WoS FullText FullText_BOKU

** Stockel, F; Konnerth, J; Kantner, W; Moser, J; Gindl, W Mechanical characterisation of adhesives in particle boards by means of nanoindentation.

EUR J WOOD WOOD PROD. 2010; 68(4): 421-426. WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Christoph Buksnowitz, Ulrich Müller, Wolfgang Gindl, Johannes Konnerth (2010): Strain distributions around knots in Picea abies (L.) boards subjected to tensile load.. [Poster]
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]

In: European Coopration in Sience and Technology, Proceedings of the COST Strategic Workshop: Principles and Development of Bio-inspired Materials

Hansmann C., Konnerth J., Rosner S. (2010): Digital image analysis of radial shrinkage of fresh Norway spruce wood.
[11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying, Skelleftea, Sweden, 18.01.2010 - 22.01.2010]

In: Morén T., Antti L., Sehlstedt-Persson M. (eds.) , Proceedings of the 11th Interbational IUFRO Wood Drying Conference “Recent Advances in the Field of Wood Drying”, 376-380

Johannes Konnerth, Ulrich Müller, Wolfgang Gindl, Christoph Buksnowitz (2010): Strain distribution in a spruce branch-stem junction. [Poster]
[COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials, Vienna, Austria, 13.04.2010 - 15.04.2010]

In: European Coopration in Sience and Technology, Proceedings of the COST Strategic Workshop: Principles and Development of Bio-inspired Materials

Konnerth Johannes, Eiser Martina, Jäger Andreas, Wimmer Rupert (2010): Macro- and micromechanical properties of red oak wood after selective removal of hemicelluloses.. [Poster]
[Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future., Geneva, Switzerland, 11.10.2010 - 15.10.2010]

In: SWST Society of Wood Science and Technology & UNECE United Nations Economic Commission for Europe - Timber Commitee, Innovative wood products are the future.

Konnerth Johannes Buksnowitz Christoph Gindl-Altmutter Wolfgang Hofstetter Karin Jäger Andreas (2010): Full set of elastic constants of spruce wood cell walls determined by Nanoindentation..
[Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future., Geneva, Switzerland, 11.10.2010 - 15.10.2010]

In: SWST Society of Wood Science and Technology & UNECE United Nations Economic Commission for Europe - Timber Commitee, Innivative wood products are the future

Rosner S., Konnerth J., Hansmann C. (2010): Acoustic emissions and radial shrinkage behavior of fresh versus pre-dried Norway spruce sapwood.
[11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying, Skelleftea, Sweden, 18.01.2010 - 22.01.2010]

In: Morén T., Antti L., Sehlstedt-Persson M. (eds.), Proceedings of the 11th International IUFRO Wood Drying Conference “Recent Advances in the Field of Wood Drying”, 87-93

Teischinger, A., Müller, U., Konnerth, J. (2010): Possibilities and limits of wood-fibre based composites.
[8th Global WPC and Natural Fibre Composites Congress and Exihibition, Stuttgart, Germany, 22.06.2010 - 23.06.2010]

In: Bledzki, A., Sperber, V.E., University of Kassel, Eds., 8th Global WPC and Natural Fibre Composites Congress and Exhibition. Scientific Presentations, A1-1 - A1-6; ISBN: 978-83-7518-226-2

Veigel, S. , Müller, U., Konnerth, J., Gindl, W. (2010): Cellulose fibers and nanofibrils for adhesive reinforcement.
[International Conference on Nanotechnology for the Forest Products Industry, Espoo, Finland, 27.09.2010]

In: Tappi, Proceedings of the International Conference on Nanotechnology for the Forest Products Industry, Code 86337. Pages: 1370-1375

2009

Journal Articles

** Konnerth, J; Gierlinger, N; Keckes, J; Gindl, W Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle.

J MATER SCI. 2009; 44(16): 4399-4406. WoS FullText FullText_BOKU

** Konnerth, J; Hahn, G; Gindl, W Feasibility of particle board production using bone glue.

EUR J WOOD WOOD PROD. 2009; 67(2): 243-245. WoS FullText FullText_BOKU

** Rosner, S; Karlsson, B; Konnerth, J; Hansmann, C; Shrinkage processes in standard-size Norway spruce wood specimens with different vulnerability to cavitation..

Tree Physiol. 2009; 29(11):1419-1431 WoS PubMed PUBMED Central FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Konnerth J Gindl W (2009): Nanoindentation for characterisation of wood-adhesive bonds. [Poster]
[International Conference on Wood Adhesives ICWA 2009, Lake Tahoe, NV, USA, 28.09.2009 - 30.09.2009]

In: Forest Products Society, Wood Adhesives 2009

2008

Journal Articles

** Konnerth, J; Gindl, W Observation of the influence of temperature on the mechanical properties of wood adhesives by nanoindentation.

HOLZFORSCHUNG. 2008; 62(6): 714-717. WoS FullText FullText_BOKU

** Konnerth, J; Harper, D; Lee, SH; Rials, TG; Gindl, W Adhesive penetration of wood cell walls investigated by scanning thermal microscopy (SThM).

HOLZFORSCHUNG. 2008; 62(1): 91-98. WoS FullText FullText_BOKU

Rosner S., Karlsson B., Konnerth J., Hansmann C. (2008): Acoustic emissions related to the dehydration stress behavior of green Norway spruce wood.

J ACOUSTIC EMISSION, 26, 14-22; ISSN 0730-0050

Conference & Workshop Proceedings, Paper, Abstract

Rosner S., Karlsson B., Konnerth J., Hansmann C. (2008): Information potential of acoustic emissions on the dehydration behavior of wood.
[28th European Conference on Acoustic Emission Testing 2008, Krakow, Poland, 17.09.2008 - 19.09.2008]

In: Ono, K. (Eds.), Proceedings of the 28th European Conference on Acoustic Emission Testing, European Working Group on Acoustic Emission, 28th European Conference on Acoustic Emission Testing, September 17-19, Kraków, 232-237

2007

Journal Articles

** Konnerth, J., Gindl, W., Müller, U. Elastic properties of adhesive polymers. Part I: polymer films by means of electronic speckle pattern interferometry.

Journal of Applied Polymer Science, 103, 3936-3939 WoS FullText FullText_BOKU

** Konnerth, J; Valla, A; Gindl, W Nanoindentation mapping of a wood-adhesive bond.

APPL PHYS A-MAT SCI PROCESS. 2007; 88(2): 371-375. WoS FullText FullText_BOKU

Conference & Workshop Proceedings, Paper, Abstract

Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W (2007): Wood adhesive bondlines by Nanoindentation.
[13th International Conference on Experimental Mechanics 2007, Alexandroupolis, Greece, 01.07.2007 - 06.07.2007]

In: E.E. Gdoutos, Eds. , Experimental Analysis of Nano and Engineering Materials and Structures, Proceedings of the 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1-6, 2007, Springer , 13th International Conference on Experimental Mechanics. Experimental Analysis of Nano and Engineering Materials and Structures, July 1-6, Alexandropoulis, 493-494; ISBN: 978-1-4020-6238-4

Konnerth J, Rials TG, Harper D, Lee S-H, Gindl W (2007): Scanning Thermal Microscopy in wood adhesive bondlines.
[9th International Conference on Wood & Biofiber Plastic Composites, Madison, WI, USA, 21.05.2007 - 23.05.2007]

In: Forest Products Society, 9th International Conference on Wood & Biofiber Plastic Composites, Proceedings No. 7224, 9th International Conference on Wood & Biofiber Plastic Composites, May 21-23, Madison, Wisconsin, 437-437; ISBN: 1-892529-50-5

Doctoral Thesis

Johannes Konnerth (2007): Mechanische Analyse von Holz-Klebstoff Verbindungen.

, 89; Universität für Bodenkultur Wien

2006

Journal Articles

** Gindl, W., Konnerth, J., Schöberl, T. Nanoindentation of regenerated cellulose fibres.

Cellulose, 13, 1-7 WoS FullText FullText_BOKU

** Konnerth, J., Gindl, W. The interphase in wood-adhesive bond lines by nanoindentation.

Holzforschung, 60, 429-433 WoS FullText FullText_BOKU

** Konnerth, J., Gindl, W., Harm, M., Müller, U. Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf- and lap joint testing method.

Holz als Roh- und Werkstoff, 64, 269-271 WoS FullText FullText_BOKU

** Konnerth, J., Jäger, A., Eberhardsteiner, J., Müller, U., Gindl, W. Elastic properties of adhesive polymers. Part II: Polymer films and bond lines by means of nanoindentation.

Journal of Applied Polymer Science, 102, 2, 1234-1239 WoS FullText FullText_BOKU

** Konnerth, J., Valla, A., Gindl, W., Müller, U. Measurement of strain distribution in timber finger joints.

WOOD SCI TECHNOL, 40, 631-636; ISSN 0043-7719 WoS FullText FullText_BOKU

© BOKU Wien Imprint