Benjamin Kromoser
Univ.Prof. Dipl.-Ing. Dr.techn. Benjamin Kromoser B.Sc.
Institut Institut für Hochbau, Holzbau und kreislaufgerechtes Bauen (IHB)
Standort Peter-Jordan-Straße 82, 1190 Wien
Email benjamin.kromoser@boku.ac.at
Tel: +43 1 47654-87611
Laufbahn
- 2022 Leiter des Institutes für Hochbau, Holzbau und kreislaufgerechtes Bauen
- 2022 Professor für Ressourceneffizienten Hochbau
- 2021 Koordinator der Doctoral School Build.Nature
- 2019 - 2022 Institutsleiter-Stellvertreter Insitut für Konstruktiven Ingenieurbau, BOKU Wien
- 2018 - 2022 Universitätsprofessor für Biobasiertes Konstruieren, Institut für Konstruktiver Ingenieurbau
- 2016 - 2016 Forschungsaufenthalt Universität Stuttgart, Institut für Leichtbau Entwerfen und Konstruieren (ILEK)
- 2015 - 2018 Wissenschaftlicher Mitarbeiter (Postdoc) an der TU Wien, Institut für Tragkonstruktionen
- 2015 Befähigung Ziviltechniker Österreich
- 2011 - 2015 Wissenschaftlicher Mitarbeiter (Prädoc) an der TU Wien, Institut für Tragkonstruktionen
Auszeichnungen
- 2019 Achievement Award for Young Engineers of the fib (Fédération internationale du béton) in the category design and construction
- 2018 2.Platz PINT | Der Preis für Innovation und Technologie vergeben von: TU Wien alumni club, Plattform 4.0 und WKÖ
- 2016 1. Platz Inits Award – Innovation to Business, category: Other Technologies
- 2016 Bundespreis für Ecodesign (Deutschland), Auswahl durch das Expertengremium und Zulassung zur Jurysitzung
- 2015 Top Ten beim Science To Business Award des Rudolf-Sallinger-Fonds
- 2015 Verleihung Dr. Ernst Fehrer-Preis der TU Wien
- 2014 Top Ten beim deutschen „Greentec Award“ mit dem Projekt „Eine Betonkuppel zum Aufblasen“
- 2012 1. Platz Concrete Design Award mit dem Projekt "Donauwelle"
Projekte
Es wurden 0 Projekte gefunden.
Publikationen
Wissentransfer in die Gesellschaft
Medienbeiträge
Vorträge
(2023) Digital design, optimisation and automated construction of a curved wooden truss – housing for the BOKU Robot Laboratory
Autoren: Kromoser, B; Ortner, M; Braun, M
IASS Annual Symposium 2023: Integration of Design and Fabrication
(2023) Die Zukunft des Bauens: Strukturoptimiert, kreislauffähig, automatisiert?
Autoren: Kromoser, B
Gastvorlesung Universität Innsbruck im Rahmen der Lehrveranstaltung Konstruktion und digitale Gestaltung
(2023) 3DP BIOWALL – CIRCULAR ECONOMY IN WOOD CONSTRUCTION THROUGH ADDITIVE MANUFACTURING OF FULLY RECYCABLE WALLS
Autoren: Benjamin Kromoser , Sara Reichenbach , Roman Myna , Raphaela Hellmayr , Bernhard Reinholz , Rupert Wimmer
WCTE - World Conference on Timber Engineering
(2023) ON THE UTILISATION OF THE WORKSPACE OF AN INDUSTRIAL ROBOT FOR MILLING STRUCTURAL TIMBER COMPONENTS - EXPERIMENTAL TRIALS WITH DIFFERENT ARM POSITIONS AND EVALUATION OF MACHINING QUALITY
Autoren: Pantscharowitsch, M; Linzer, F.; Neuner, H-B; Kromoser, B;
World Conference on Timber Engineering
(2023) Sustainable Timber Construction - Transforming Tradition From Past to Future
Autoren: Kromoser, B
Modern Timber Structures
(2023) Ressourceneffizientes Bauen mit Betonfertigteilen
Autoren: Kromoser, B
SW CONCRETE TALK
(2023) NIMETBEW - Potentiale von nichtmetallischer Bewehrung im Infrastruktur-Betonbau (VIF 2019)
Autoren: Kromoser, B
FSV Infonachmittag
(2023) Usability and Suitability of Different Small-Scale Test Setups to Accurately Assess the Shear Strength of the Glue Line in Adhesive Bonded Timber-Concrete-Composite Elements
Autoren: Brosch, F; Kromoser, B
fib Symposium 2023: Building for the Future: Durable, Sustainable, Resilient
(2023) Development of a Simplified Strategy for Topology Optimisation of Reinforced Concrete Beams Using Regular Geometric Shapes
Autoren: Ahmed, I; Reichenbach, S; Kromoser, B
fib Symposium 2023 - Building for the Future: Durable, Sustainable, Resilient
(2023) Additive manufacturing of fully recyclable walls solely made from renewables – a possible quantum leap in sustainable building construction
Autoren: Kromoser, B; Reinholz, B; Myna, R; Reichenbach, S; Liebner, F.; Wimmer, R
IASS Annual Symposium 2023 - Integration of Design and Fabrication
(2023) Ressourceneffizientes Bauen
Autoren: Kromoser, B
Vortragsreihe FFG Kreislaufmanager*in im Bauwesen
(2023) New digital design and automated production approaches to foster sustainability and a real circular economy in building construction
Autoren: Kromoser, B
5th International Conference on Bio-Based Building Materials
(2023) Building Construction with Minimal Environmental Impact – Approaches to Transform Tradition From Past to Future
Autoren: Kromoser, B
Max Planck Institut
(2023) Automated Production Process for Structure-Optimised Concrete Elements
Autoren: Gappmaier, P; Reichenbach, S; Kromoser, B
fib Symposium 2023 - Building for the Future: Durable, Sustainable, Resilient
(2023) Zukunft des Bauens: Automatisiert und Kreislauffähig?
Autoren: Kromoser, B
Pint of Science
(2023) 3DP Biowall - Circular economy in wood construction through additive manufacturing of fully recyclable walls
Autoren: Kromoser, B; Reichenbach, S; Myna, R; Hellmayr, R; Reinholz, B; Wimmer, R
World Conference on Timber Engineering (WCTE 2023)
(2023) KEYNOTE: Knotenpunkte und Verbindungsmittel aus/für Holz - innovativ, digital, nachhaltig
Autoren: Kromoser, B
Fachseminar der KNAPP GmbH
(2022) Milling Tenons on GLT Beams Using an Industrial Robot and Joinery Machine – Comparison Based on Surface Quality and 3D Scans
Autoren: Pantscharowitsch, M; Kromoser, B
Mass Timber Conference 2022
(2022) A Contribution to Lowering Concrete-Related Emissions: Realization of Mass-Optimized Concrete Girders
Autoren: Stoiber, N; Kromoser, B
Engineering Mechanics Institute EMI Conference 2022
(2022) Cradle-to-gate LCA of FRP reinforcement for concrete structures
Autoren: Reichenbach, S; Stoiber, N; Kromoser, B
fib Congress 2022 Oslo - Concrete Innovation for Sustainability
(2022) 6. Österreichische Fachkonferenz Modulbau
Autoren: Kromoser, B;
Konferenz Modulbau 2022 - Ressourceneffizientes Bauen mit Modulen: Herausforderungen im Zuge der Planung und automatisierten Herstellung
(2022) Putting Structurally optimised concrete girders to the test: Design, Manufacture & Experimental Testing
Autoren: Stoiber, N; Kromoser, B
fib Congress 2022 Oslo - Concrete Innovation for Sustainability
(2022) Strukturoptimierung & Automatisierung im Holzbau
Autoren: Kromoser, B
Innovationskongress Digitales Planen, Bauen & Betreiben 2022
(2022) NUMERICAL MODELLING STRATEGY FOR UHPC STRUCTURES: MODEL CALIBRATION ASSISTED BY TESTING AND APPLICATION ON A HIGH-PERFORMANCE BEAM
Autoren: Brosch, F; Stoiber, N; Hammerl, M; Kromoser, B
fib Congress 2022 Oslo - Concrete Innovation for Sustainability
(2021) Digital supported structural optimization and automated construction: Using new tools to further develop engineering and craftsmanship in the 21st century
Autoren: Kromoser, B
aaec Network partner seminar
(2021) Decreasing of environmental impact and increasing productivity in precast construction: Strategies for future developments
Autoren: Kromoser, B
BIBM – Bureau International du Béton Manufacturé Congress 2021: The Future of European Construction - Precast Excellence in Nordic Countries
(2021) Pushing concrete material usage to the limit: Weight optimised, 3D printed concrete girders with external reinforcement
Autoren: Stoiber, N; Kromoser, B
International fib Symposium - Conceptual Design of Structures 2021
(2021) Load-bearing Behaviour of Pretensioned Thin-walled Concrete Structures Reinforced with CFRP
Autoren: Hammerl, M; Kromoser, B
fib Symposium 2021
(2021) EXPERIMENTAL INVESTIGATIONS ON THE LOAD-BEARING BEHAVIOUR OF ROBOT-MANUFACTURED TIMBER-TIMBER JOINTS
Autoren: Pantscharowitsch, M.; Braun, M.; Kromoser, B.
World Conference on Timber Engineering 2021
(2021) The efforts so far: Topology optimization in concrete construction
Autoren: Stoiber, N; Kromoser, B
14th World Congress of Structural and Multidisciplinary Optimization
(2021) Potential Fields of Application for CFRP Reinforcement in Concrete Infrastructure Engineering: Material Availability, Application Areas and Static Parametric Study with Consideration of the GWP
Autoren: Preinstorfer, P; Reichenbach, S; Huber, T; Kromoser, B
fib Symposium 2021: Concrete Structures: New Trends for Eco-Efficiency and Performance
(2021) Application potential of textile reinforcement in concrete construction for infrastructure buildings: Environmental performance and availability
Autoren: Reichenbach, S; Kromoser, B; Preinstorfer, P; Huber, T
IABSE Congress Ghent 2021. Structural Engineering for Future Societal Needs
(2021) Environmental Assessment of Non-metallic Reinforcement for Concrete Structures as an Alternative to Steel Reinforcement
Autoren: Stoiber, N; Hammerl, M; Kromoser, B
fib International Conference on Concrete Sustainability
(2020) Prestressing of carbon fiber reinforced concrete
Autoren: Hammerl, M; Kromoser, B
5th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials
(2019) Ressourceneffizienter Betonbau
Autoren: Benjamin Kromoser
COM:BAU Pecha Kucha - BETON - Material für die Zukunft
(2019) Towards efficiency in constructive timber engineering - design and optimization of timber trusses
Autoren: KROMOSER, B; BRAUN, M
IABSE congress 2019, The evolving metropolis
(2019) Geodetic surface based methods for structural analysis during construction phase
Autoren: Schmitt, C; Neuner, H; Kromoser, B
4th Joint International Symposium on Deformation Monitoring (JISDM)
(2019) Erfahrungsbericht aus Österreich über die Anwendung von neuen Verfahren im Brückenbau
Autoren: Kollegger, J; Kromoser, B; Eichwalder, B
29. Dresdner Brückenbausymposium 2019
(2019) Manta event roofing Pneumatic formwork construction
Autoren: Kromoser, B; Kollegger, J.
Proceedings 63th Betontage
(2019) Thin walled CFRP reinforced UHPC structures – towards efficiency in concrete engineering?
Autoren: Kromoser, B
IASS Symposium 2019 Form and Force
(2019) Grundlagen und Beispiele zur Nachhaltigkeitsbewertung von Carbonbetonbauteilen
Autoren: Stoiber, N; Kromoser, B
11. Carbon- und Textilbetontage 2019
(2019) Thin walled CFRP reinforced UHPC structures – towards efficiency in concrete engineering?
Autoren: Kromoser, B
IASS Symposium 2019 Form and Force
(2019) Superelevated wooden truss - increase of load bearing capacity and stiffness
Autoren: Braun, M; Kromoser, B
IASS Symposium 2019 Form and Force
(2019) Challenges for the automatization of the process chain in building construction
Autoren: Benjamin Kromoser
WKO - Future of Building
(2019) Industrialization of the design and production process of wooden trusses
Autoren: Kromoser, B; Braun, M
CompWood 2019
(2018) Construction of a concrete shell bridge over a two-track rail with Pneumatic Forming of Hardened Concrete
Autoren: Kromoser, B; Kollegger, J
IASS Symposium 2018 - Creativity in Structural Design
(2018) EXPERIMENTAL STUDY OF THE SHEAR BEHAVIOUR OF THIN WALLED CFRP REINFORCED UHPC STRUCTURES
Autoren: Kromoser, B; Huber, P; Preinstorfer, Ph.
fib congress 2018
(2018) Erection of bridges and shells without formwork - challenges for the computational modelling
Autoren: Kollegger, J.; Kromoser, B.; Suza, D.:
Conference on Computational Modelling of Concrete and Concrete Structures EURO-C 2018
(2018) Structural behaviour of carbon reinforced slab elements made of ultra-high performance concrete
Autoren: Preinstorfer, P; Kromoser, B; Kollegger, J
12th fib International PhD Symposium in Civil Engineering 2018
(2018) Experimentelle Untersuchungen zur Querkrafttragfähigkeit von dünnwandigen Carbonbetonbauteilen
Autoren: Kromoser, B; Huber, P.; Preinstorfer, P.
10. Carbon- und Textilbetontage 2018
(2018) Untersuchungen zum Biegetragverhalten dünnwandiger Tragelemente aus carbonbewehrtem UHPC
Autoren: Preistorfer, P., Kromoser, B.
10. Carbon- und Textilbetontage 2018
(2018) Robotics for innovative wood constructions
Autoren: Kromoser, B.:
Internationaler Baukongress Future of Building 2018
(2018) BENDING BEHAVIOUR OF FILIGREE STRUCTURAL ELEMENTS MADE OF TEXTILE REINFORCED UHPC
Autoren: Preinstorfer, Ph., Kromoser, B., Kollegger, J.
fib congress 2018
(2018) Manta, constructed with Pneumatic Forming of Hardened Concrete
Autoren: Kollegger, J., Kromoser, B., Ritt, M., Pachner, T., Jusufagic, H.
fib congress 2018
(2017) Dünnwandige Bauteile aus carbonbewehrtem Ultrahochleistungsbeton
Autoren: Preinstorfer, P.; Kromoser, B.; Kollegger, J.:
VÖZ Kolloquium 2017
(2017) Construction of a thin walled concrete shell event canopy
Autoren: Kromoser, B.; Kollegger, J.:
CCC Tokaj
(2017) Geodetic surface based methods for applications in civil engineering
Autoren: Schmitt, C.; Kromoser, B.; Harmening, C.; Falkner, J.; Neuner, H.-B.; Kollegger, J.:
7th International Conference on Engineering Surveying
(2017) Stand der Entwicklung – dünnwandige Kuppelbauten
Autoren: Kromoser, B.; Kollegger, J.; Kari, H.; Jusufagic, H.:
Austrian bridge conference 2017
(2017) How to inflate a hardened concrete shell with a weight of 80 t
Autoren: Kromoser, B.; Kollegger, J.:
IASS Annual Symposium 2017
(2016) Building concrete shells without formwork and falsework
Autoren: Kromoser, B.; Kollegger, J.:
fib Symposium 2016
(2016) Structural Optimization of a concrete shell bridge with the Pneumatic Forming of Hardened Concrete construction method
Autoren: Pachner,T.; Kromoser, B.; Kollegger, J.:
IASS 2016 International Symposium
(2016) Experimentelle Untersuchungen zum Zug- und Biegetragverhalten von hochfesten und ultrahochfesten Betonprobekörpern
Autoren: Kromoser, B.:
8. Anwendertagung Textilbeton 2016
(2016) On the Bond Behaviour between Double-Wall Elements made of HPC/UHPC and ordinary cast-in-situ Concrete
Autoren: Preinstorfer, P.; Kromoser, B.; Kollegger, J.:
HIPERMAT 2016
(2015) Pneumatische Schalungen im Brückenbau
Autoren: Kromoser, B.; Kollegger, J.:
Brückentagung 2015
(2015) Egg-Graben-Brücke, Wildbrücke AM2, Lafnitzbrücke - Anwendung von neuen Bauverfahren für Brücken in Österreich.
Autoren: Kollegger, J.; Foremniak, S.;Kromoser, B.:
25. Dresdner Brückenbausymposium 2015
(2015) Building shells from initially flat hardened concrete plates
Autoren: Kromoser, B.; Kollegger, J.:
IASS 2015
(2015) Neue Tragwerke – Eine Betonkuppel zum Aufblasen
Autoren: Kollegger, J.; Kromoser, B.:
59. Betontage Ulm
(2015) Thin-walled textile concrete furniture
Autoren: Kromoser, B.:
11th Central European Congress on Concrete Engineering 2015
(2015) Anwendung von Textilbewehrungen für freigeformte Betonflächen
Autoren: Kromoser, B.:
7. Anwendertagung Textilbeton 2015
(2014) Innovative Proposal for the Construction of Concrete Bridges
Autoren: Kollegger, J.; Foremniak, S.; Kromoser, B.:
International Seminar on Long Span Bridge
(2014) Innovations for the Design of Concrete Bridges Developed at Vienna University of Technology
Autoren: Kollegger, J.; Foremniak, S.; Kromoser, B.:
10th Japanese German Bridge Symposium in Munich,
(2014) Building free formed concrete surfaces by using the “pneumatic wedge method
Autoren: Kromoser, B.; Kollegger, J.:
The 10th fib International PhD Symposium in Civil Engineering 2014
(2014) DONAUWELLE – freigeformte Grillmöbel aus Textilbeton
Autoren: Kromoser, B.; Ritt, M.:
VÖZ Kolloquium 2014
(2014) Simulation of large strains in concrete specimen – centric tensile tests using steel ropes as reinforcement
Autoren: Kromoser, B.; Eichwalder, B.; Kollegger, J.:
EURO-C 2014
(2013) Concrete Design Award" - Betonmöbel aus Textilbeton
Autoren: Kromoser, B.; Ritt, M.:
VÖZ Kolloquium 2013
(2012) Methods for transforming flat concrete plates to double curved shell structures
Autoren: Kromoser, B.:
9th fib International PhD Symposium in Civil Engineering 2012
(2012) The building of ice and concrete shells by employing pneumatic formwork
Autoren: Kollegger, J., Kromoser, B., Dallinger, S.:
2nd International Conference on Flexible Formwork 2012
(2012) Using Ice to Build Shell Structures
Autoren: Kromoser, B.; Kollegger, J.:
10th International Conference and Exhibition on Performance of Ships and Structures in Ice 2012
Additive manufacturing of fully recyclable walls made of a renewable recondary-resource composite
Autoren: Kromoser, B; Myna, R; Reichenbach, S; Wimmer, R; Hellmayr, R
Development of prestressed T-beams made of textile reinforced UHPC
Autoren: Preinstorfer, P.; Kromoser, B.,;Kollegger, J.:
EXPERIMENTAL INVESTIGATIONS ON THE LOAD-BEARING BEHAVIOUR OF ROBOT-MANUFACTURED TIMBER-TIMBER JOINTS
Autoren: Pantscharowitsch, M; Braun, M; Kromoser, B
EXPERIMENTAL INVESTIGATIONS ON TIMBER STEP JOINTS DETERMINING THE INFLUENCE OF INTENTIONALLY PLACED INACCURACIES ON THE LOAD-BEARING BEHAVIOUR
Autoren: Braun, M; Kromoser, B
Robotic Concrete Drilling – First Test Results
Autoren: Ortner, M; Kromoser, B