Gerhard Sinn
Dipl.-Ing. Dr. Gerhard Sinn
Institut Institut für Physik und Materialwissenschaft
Standort Peter-Jordan-Straße 82, 1190 Wien
Email gerhard.sinn@boku.ac.at
Tel: +43 1 47654-89213, 152989213
ORCID: 0000-0002-8365-3650
6603953521: AuthorId
O-7133-2014: ResearcherId
Laufbahn
- 2005 Doktorat, Universität f. Bodenkultur
- 1998 Sponsion, Technische Universität Wien
Projekte
Es wurden 0 Projekte gefunden.
Publikationen
Wissentransfer in die Gesellschaft
Medienbeiträge
Vorträge
(2022) Why do Schwann cells like spider silk?
Autoren: Ploszczanski Leon, Peter Karolina, Sinn Gerhard, Naghilou Aidą, Radtke Christine, Lichtenegger Helga
16th Multinational Congress on Microscopy 16MCM 2022
(2022) Why do Schwann cells like spider silk?
Autoren: Ploszczanski Leon, Peter Karolina, Sinn Gerhard, Naghilou Aidą, Radtke Christine, Lichtenegger Helga
12th ASEM workshop on ADVANCED ELECTRON MICROSCOPY 2022
(2019) A SEM study on fracture surfaces of nano-reinforced CFRPs
Autoren: Sinn, G; Ploszczanski, L;Jocher, L; Rennhofer, H; Singer, G; Lichtenegger, H
9th ASEM Workshop
(2018) Fracture toughness in mechanical testing and cutting models
Autoren: Sinn, G; Maierhofer, J; Lichtenegger, H
11. International Science Conference: 'Chip and Chipless Woodworking Processes'
(2018) Modification of carbon fiber composites with carbon nanotubes
Autoren: Singer, G; Sinn, G; Rennhofer, H; Lichtenegger, H
International Conference on Functional Nanomaterials and Nanodevices 2018
(2018) Towards nano-modified carbon fiber composites
Autoren: Singer, G; Sinn, G; Rennhofer, H; Siedlaczek, P; Lichtenegger, H;
Composite Materials Congress (CMC) 2018
(2018) Dispersion properties of modified carbon nanotubes
Autoren: Singer, G; Unterlass, M; Windberger, U; Rennhofer, H; Sinn, G; Wendrinsky, J; Stöger, W; Semlitsch, KH; Lichtenegger, H;
International Conference on Functional Nanomaterials and Nanodevices 2018
(2017) Processing of Carbon Nanotubes and Carbon Nanofibers towards high performance Composite Materials
Autoren: Gerald Singer, Gerhard Sinn, Harald Rennhofer, Miriam M. Unterlass, Josef Wendrinsky, Ursula Windberger, Helga C. Lichtenegger
2nd Danube Vltava Sava Polymer Meeting DVSPM 2017
(2017) Carbon Nanotubes zur mechanischen Verstärkung von Carbonfaser Kompositen
Autoren: Singer, G; Rennhofer, H; Sinn, G; Unterlass, M; Wendrinsky, J; Windberger, U; Lichtenegger, H
21. Symposium Verbundwerkstoffe und Werkstoffverbunde 2017
(2017) Dispersion properties of different carbon nanotubes in epoxy resin on a three-roll mill
Autoren: Singer, G; Unterlass, M; Wendrinsky, J; Rennhofer, H; Sinn, G; Siedlaczek, P; Windberger, U; Stöger, W; Semlitsch, K; Lichtenegger, H
NanoCarbon Annual Conference 2017
(2017) Influence of wood species, cutting depth and direction on cutting forces in thin kerf sawing
Autoren: Sinn, G; Lichtenegger, HC
International Wood Machining Seminar. IWMS23
(2016) CNT functionalization towards high performance composite materials
Autoren: Singer, G; Unterlass, M; Wendrinsky, J; Rennhofer, H; Sinn, G; Grünewald, T; Windberger, U; Stöger, W; Semlitsch, K; Lichtenegger, H
17th International Conference on the Science and Application of Nanotubes and Low-Dimensional Materials - NT16, 2016
(2010) Cellulose aerogels: Highly porous, ultra-lightweight biomaterials
Autoren: SCHIMPER, C.B., LIEBNER, F., HAIMER, E., WENDLAND, M., MIETHE, P., POTTHAST, A., ROSENAU, T., STANZL-TSCHEGG, S., SINN, G.
COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials
(2010) Preparation and characterization of reinforced bacterial cellulose aerogels
Autoren: Aigner, N., Haimer, E., Sinn, G., Litschauer, M., Neouze, M., Koch, T., Nedelec, J., Hardy-Dessources, A., Potthast, A., Rosenau, T., Liebner, F.
8th International Symposium Naro.tech 2010 - Materials made of Renewable Resources
(2007) Ultrasonic assisted cutting
Autoren: Gerhard Sinn
COST E35 WG2 & WG3 Meeting 2007 - Meeting between research and industry
(2007) Evaluation of the fracture area by 3D scanning
Autoren: Sandak Jakub, Sinn Gerhard
3rd International Symposium on Wood Machining 2007
(2007) Surface Energy and Wettability of Knots and Surrounding Area
Autoren: Sinn Gerhard, Ters Thomas, Stanzl-Tschegg Stefanie
3rd International Symposium on Wood Machining 2007
(2007) Surface Energy and Wettability of Knots and Surrounding Area
Autoren: Sinn, Gerhard
3rd International Symposium on Wood Machining 2007
(2006) Analysis of cutting forces in circumferential flat milling of particle board
Autoren: Sinn, G.
International Conference on Integrated Approach to Wood Structure, Behaviour and Applications. Joint meeting of ESWM and COST Action E35 2006
(2006) Analysis of cutting forces in circumferential flat milling of particle board
Autoren: Sinn, G., Beer, P., Stanzl-Tschegg, S.
International Conference on Integrated Approach to Wood Structure, Behaviour and Applications. Joint meeting of ESWM and COST Action E35 2006
(2005) In plane mode I fracture of particleboards
Autoren: Sinn, G. Tschegg, S.
COST Action E35: "Rosenheim Workshop"
(2005) Analysis of Cutting Forces in Circumferential flat milling of MDF and Particleboard
Autoren: Sinn, G., Beer, P., Gindl, M., Patsch, R., Kisselbach, A., Standler, F., Stanzl-Tschegg, S.
17th International Wood Machining Seminar 2005
(2005) Mechanical properties of particleboards induces work to cut
Autoren: Beer, P., Sinn, G., Kowaluk, G., Lacki, W., Dziurka, D.
17th International Wood Machining Seminar 2005
(2003) Ultrasonic assisted beech wood cutting
Autoren: Sinn, G.
International Conference GUB 10 2003
(2003) Influence of ultrasonic vibrations on low speed cutting of spruce wood
Autoren: Sinn, G., Beer, P., Zettl, B., Mayer, H.
16th international wood machining seminar 2003
(2003) Ultraschallschneiden von Holz
Autoren: Sinn, G.
Seminar des FFF und des Knet des Fachverbandes der Holzindustrie Österreichs
(2003) Fracture mechanical parameters for the TR - crack propagation system in wood
Autoren: Frühmann, K., Burgert, I., Sinn, G., Stanzl-Tscheff, S.E.
2nd International Conference of the ESWM 2003
(2003) Influence of Cutter Blunting on Milling of Particle-Board
Autoren: Beer, P., Sinn, G., Müller, U., Gindl, M., Stanzl-Tschegg, S.
16th international wood machining seminar 2003
(2003) Fracture mechanical parameters for the TR - crack propagation system in wood
Autoren: Frühmann, K., Burgert, I., Sinn, G., Stanzl-Tschegg, S.
2nd International Conference of the ESWM 2003
(2002) UV- Behandlung von Synthetischen- und Naturpolymeren
Autoren: Gindl, M., Cabaj, A., Sinn, G., Schmalwieser, A., Eder, M., Stanzl-Tschegg, S.
V. Materialphysikalisches Symposium
Oberflächencharakterisierung von Massivholz.
Autoren: Gindl, M., Sinn, G.
Proceedings of the 2nd International Symposium on Wood Machining. Properties of Wood and Wood Composites Related to Machining
Autoren: Stanzl-Tschegg, S., Gindl, M., Sinn, G.
Influence of Ammonia Addition on Particleboard Properties
Autoren: Kowaluk, G., Dziurka, D., Beer, P., Sinn, G., Stanzl-Tschegg, S.E.
Finite Element Analysis of Tool Indentation into Melamine Coated Particleboard
Autoren: Palubicki, B., Beer, P., Sinn, G., Stanzl-Tschegg, S.
Oberflächeneigenschaften von Holz, untersucht mittels XPS und REM.
Autoren: Sinn, G.
Surface Activation of Wood Using UV Light
Autoren: Gindl, M., Cabaj, A., Schmalwieser, A., Hansmann, Ch., Eder, M., Sinn, G., Stanzl-Tschegg, S.E.
Anwendung von XPS an Holzoberflächen.
Autoren: Sinn, G.
Characterization of Degradation Mechanisms in Thermoset Composites
Autoren: Siedlaczek, P; Sinn, G; Peter, P; Jandl, J; Daisse, G; Zecchini, M; Wan-Wendner, R; Lichtenegger, H
Application of Ultrasonic-Assisted Cutting in Wood Machining
Autoren: Sinn, G., Mayer, H., Zettl, B., Ede, Ch., Beer, P., Stanzl-Tschegg, S.
Bestimmung elastischer Eigenschaften von Holz im Mikrozugversuch mittels optischer Dehnungsmessung.
Autoren: Sinn, G.
XPS an Holzoberflächen.
Autoren: Sinn, G.
Oberflächeneigenschaften von Massivholz: Charakterisierung der Holzoberfläche mittels XPS und ESEM.
Autoren: Sinn, G.