Stefanie Tschegg

Lectures

• Year: 2017 -  S-N behaviour of copper at VHCF loading

  Autoren: Stanzl-Tschegg, SE; Perlega, A; Meischel, M; Schönbauer, B

  Event: 7th International Conference on Very High Cycle Fatigue VHCF7 2017

• Year: 2016 -  Fatigue strength prediction of 17-4PH stainless steel

  Autoren: Schönbauer, BM; Yanase, K; Stanzl-Tschegg, SE; Endo, M

  Event: 27. Colloquium on Fatigue Mechanisms 2016

• Year: 2016 -  Ultra slow fatigue crack propagation in metallic alloys

  Autoren: Sarrazin-Baudoux, C; Stanzl-Tschegg, SE; Schönbauer, BM; Petit, J

  Event: XVIII International Colloquium on Mechanical Fatigue of Metals

• Year: 2015 -  Very high cycle fatigue properties of 17-4PH stainless steel

  Autoren: Schönbauer, BM; Yanase, K; Perlega, A; Stanzl-Tschegg, SE; Endo, M

  Event: ATEM 2015

• Year: 2015 -  Regionalized quantitative determination of the spatial distribution of biodegradable Mg alloys in mineralized bone tissue by LA-ICP-MS

  Autoren: Draxler, J; Zitek, A; Meischel, M; Stanzl-Tschegg, SE; Mingler, B; Martinelli, E; Weinberg, A; Prohaska, T

  Event: 11th ASAC-JunganalytikerInnenforum 2015

• Year: 2015 -  Magnesium from bio-resorbable implants: distribution and impact on the bone nano- and mineral structure

  Autoren: Grünewald, T.A.; Rennhofer, H; Meischel, M; Hesse, B; Burghammer, M; Cotte, M; Weinberg, AM; Peterlik, H; Stanzl-Tschegg, SE; Lichtenegger,H

  Event: Joint Annual Meeting of the Austrian Physical Society and the Swiss Physical Society 2015

• Year: 2015 -  Chemical imaging of the elemental degradation behavior of biodegradable Mg alloys in mineralized bone tissue by LA-ICP-MS

  Autoren: Draxler, J; Zitek, A; Meischel, M; Stanzl-Tschegg, S; Mingler, B; Martinelli; E; Weinberg, A; Santner, J; Prohaska, T

  Event: European Winter Conference on Plasma Spectrochemistry 2015

• Year: 2014 -  PSBs and non-propagation of small surface and interior cracks in polycrystalline copper

  Autoren: Stanzl-Tschegg, SE; Schönbauer BM

  Event: MSMF-7 2013

• Year: 2014 -  Small crack growth from corrosion pits

  Autoren: Schönbauer, B; Karr, U; Perlega, A; Stanzl-Tschegg, S

  Event: 25th Colloquium on Mechanisms of Fatigue 2014

• Year: 2014 -  VHCF of spray formed hypereutectic aluminium silicon alloy

  Autoren: Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, S; Przeorski, T; Krug, P

  Event: Fatigue Design & Material Defects (FDMDII-JIP 2014)

• Year: 2014 -  Influence of stress ratio and environmental surface degradation on the VHCF behaviour of steam turbine blade steels

  Autoren: Schönbauer, BM; Perlega, A; Stanzl-Tschegg, SE

  Event: 6th International Conference on Very High Cycle Fatigue

• Year: 2014 -  Fracture mechanical characterization of interior-fatigue-cracks

  Autoren: Stanzl-Tschegg, SE; Ogawa, T; Schönbauer, BM

  Event: 6th International Conference on Very High Cycle Fatigue

• Year: 2014 -  Ultrasonic fatigue of spray formed hypereutectic aluminum silicon alloy and vibration analysis by means of non-linear acoustics

  Autoren: Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, S E; Przeorski, T; Krug, P

  Event: 6th International Conference on Very High Cycle Fatigue

• Year: 2014 -  Fatigue assessment of corroded turbine blade steels

  Autoren: Schönbauer, BM; Perlega, A; Karr, UP; Stanzl-Tschegg, SE

  Event: Fatigue Design & Material Defects (FDMDII-JIP 2014)

• Year: 2014 -  Mass spectrometric imaging - Quantification strategies for created bio-images measured by LA-ICP-MS

  Autoren: Draxler, J., Zitek, A., Tschegg, S., Mingler, B., Weinberg, A., Prohaska, T.

  Event: European Geosciences Union EGU General Assembly 2014

• Year: 2014 -  Mass spectrometric imaging - Quantification strategies for created bio-images measured by LA-ICP-MS .

  Autoren: Draxler, J., Zitek, A., Tschegg, S., Mingler, B., Weinberg, A., Prohaska, T.

  Event: 10th ASAC JunganalytikerInnenforum 2014

• Year: 2014 -  Mass Spectrometric Imaging (MSI) – Quantification strategy for chemical images measured by LA-ICP-MS

  Autoren: Draxler, J., Zitek, A., Tschegg, S., Mingler, B., Weinberg, A. and Prohaska, T.

  Event: Pumpaya Meeting 2014

• Year: 2013 -  Micro hardness

  Autoren: Meischel, M; Tschegg, S

  Event: Project Meeting BRIC 2013 - Bioresorbable Implants for Children

• Year: 2013 -  Biodegradable bone implants

  Autoren: Meischel, M; Tschegg, S; Berger, L; Tschegg, E; Fischer, L; Prohaska, E; Martinelli, E; Weinberg, A

  Event: Jahrestagung der Deutschen Gesellschaft für Biomaterialien in Erlangen

• Year: 2013 -  Fracture resistance and healing processes of wood and bone - parallels of strategies of nature

  Autoren: Stanzl-Tschegg, S

  Event: 5th International Conference on Mechanics of Biomaterials and Tissues

• Year: 2013 -  Investigation of degradation products of novel implant materials used in orthopaedic trauma (degIMMAT, Laura Bassi BRIC)

  Autoren: Draxler, J; Fischer, L; Tschegg, S; Mingler, W; Weinberg, A; Prohaska, T

  Event: JAF 2013

• Year: 2013 -  BOKU Expertise: ESEM/EDX; Micro hardness, Roughness measurement, LA-ICP-MS and IC-PMS, SAXS and WAXS

  Autoren: Meischel, M; Tschegg, S

  Event: Project Meeting BRIC 2013 - Bioresorbable Implants for Children

• Year: 2013 -  Biocompatibility and Degradation of Implants

  Autoren: Meischel, M; Celarek; A; Berger, L; Tschegg, E; Weinberg, A; Tschegg, S

  Event: Project Laura Bassi BRIC Hearing 2013

• Year: 2013 -  Fracture-mechanical properties of growth plates of animals of different ages

  Autoren: Tschegg, EK; Celarek, A; Stanzl-Tschegg, S

  Event: 5th International Conference on Mechanics of Biomaterials and Tissues

• Year: 2013 -  Rissausbreitung an mit Lochfraß behaftetem Dampfturbinenstahl

  Autoren: Perlega, A; Schönbauer, B; Karr, U; Tschegg, S

  Event: Arbeitskreissitzung der DVM/DGM AG Materialermüdung

• Year: 2013 -  Corrosion fatigue and pit-to-crack transition of 12% Cr steel

  Autoren: Schönbauer, B; Tschegg, S; Perlega, A

  Event: 24th Colloquium on Mechanisms of Fatigue 2013

• Year: 2013 -  Untersuchung der Abbauprodukte neuartiger Implantatmaterialien für die Verwendung in der Unfallchirurgie

  Autoren: Mingler, B., Draxler, J., Hann, S., Tschegg, S., Weinberg, A. und Prohaska, T.

  Event: Präsentation der Projekte des Life Science Call 2011

• Year: 2013 -  Untersuchung der Abbauprodukte neuartiger Implantatmaterialien für die Verwendung in der Unfallchirurgie

  Autoren: Mingler, B; Draxler, J; Hann, S; Tschegg, S; Weinberg, A; Prohaska, T

  Event: Life Science

• Year: 2013 -  Interface

  Autoren: Meischel, M; Celarek, A; Weiß, B; Berger, L; Tschegg, E; Weinberg, A; Tschegg, S;

  Event: Project Laura Bassi BRIC Hearing 2013

• Year: 2013 -  Pit-to-crack transition and corrosion fatigue of 12% Cr steam turbine blade steel

  Autoren: Schönbauer, BM; Perlega, A; Stanzl-Tschegg, SE

  Event: ICF-13 2013

• Year: 2013 -  Corrosion-fatigue prediction methodology for 12% Cr steam turbine blades

  Autoren: Salzman, R; Gandy, D; Rieger, N; Schönbauer, B; Tschegg, S; Zhou, S; Turnbull, A

  Event: Power2013

• Year: 2012 -  Endurance limits and non-propagating cracks

  Autoren: H. Mayer, S. Tschegg, B. Schönbauer

  Event: From Macro to Nano, Understanding Mechanical Behavior across Length Scales: A Structural Materials Division Symposium in Honor of Robert Ritchie, TMS 2012

• Year: 2012 -  Investigation of degradation products of novel implant materials used in accident surgery

  Autoren: Draxler, J; Fischer, L; Tschegg, S; Meischel, M; Prohaska, T

  Event: Pumpaya Meeting 2012

• Year: 2012 -  Influence of corrosion pits on the fatigue limit of 12% Cr steam turbine blade steel

  Autoren: Schönbauer, B; Stanzl-Tschegg, S; Rieger, N; Salzman, R; Gandy, D

  Event: ECF-17 2012

• Year: 2012 -  Ultrasonic fatigue testing and results on 12% Cr steam turbine balde steel

  Autoren: Schönbauer, B; Tschegg, S

  Event: Expert-Workshop Corrosion, Fatigue Damage and Life Prediction for Steam Turbine Blades 2012

• Year: 2012 -  Influence of corrosion pits and environment on the fatigue life of 12% Cr steam turbine blade steel

  Autoren: Schönbauer, B; Perlega, A; Tschegg, S; Rieger, N; Salzman, R; Gandy, D

  Event: 26th ICMFM 2012

• Year: 2011 -  Crack initiation and propagation in 12% Cr steam turbine blade steel

  Autoren: Schönbauer, B; Stanzl-Tschegg, S; Rieger, N; Salzman, R; Turnbull, A; Zhou, S; Gandy, D

  Event: 5th International Conference Very High Cycle Fatigue VHCF-5 2011

• Year: 2011 -  Determination of metals in tissues of rats implanted with bio degradable Mg alloys used for osteo synthesis

  Autoren: Fischer, L., Tschegg, S., Weinberg, A. and Hann, S

  Event: Pumpaya 2011

• Year: 2011 -  Corrosion-fatigue in steam turbine blades

  Autoren: Salzman, RN; Rieger, NF; Tschegg, S; Schönbauer, B; Turnbull, A.; Zhou, S; Gandy, D

  Event: 6. Int Conf on Adv in Mat Tech for Fossil Power Plants

• Year: 2011 -  Ultra slow fatigue crack propagation in TA6V titanium alloy

  Autoren: C.Sarrazin-Baudoux, S.E.Stanzl-Tschegg, H.Mayer, J.Petit

  Event: 5th International Conference Very High Cycle Fatigue VHCF-5 2011

• Year: 2010 -  Cellulose aerogels: Highly porous, ultra-lightweight biomaterials

  Autoren: SCHIMPER, C.B., LIEBNER, F., HAIMER, E., WENDLAND, M., MIETHE, P., POTTHAST, A., ROSENAU, T., STANZL-TSCHEGG, S., SINN, G.

  Event: COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials

• Year: 2010 -  Role of impurities and PSBs on microcracking of polycrystalline copper at very high numbers of cycles

  Autoren: Stanzl-Tschegg, S; Eichinger, K; Weidner, A; Tschegg, E; Bernardi, J; Schönbauer, B

  Event: MSMF-6 2010

• Year: 2010 -  Fatigue Crack Growth in AISI 410 Steam Turbine Steel at a loading freqeuency of 19 kHz

  Autoren: Schönbauer, B; Stanzl-Tschegg, S

  Event: 21. Colloquium on Fatigue Mechanism

• Year: 2010 -  Wood as a bioinspiring material

  Autoren: TSCHEGG, S., POTTHAST, A., ROSENAU, T., LIEBNER, F.

  Event: COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials

• Year: 2010 -  Near-threshold fatigue crack propagation and internal cracks in steel

  Autoren: Stanzl-Tschegg, S; Schönbauer, B

  Event: Fatigue 2010

• Year: 2009 -  Ultra-lightweight aerogels from non-derivatized pulps and cellulose derivatives.

  Autoren: Liebner, F.; Haimer, E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M.; Carsten, W.; Rosenau, T.

  Event: 15th International Symposium on Wood, Fiber and Pulping Chemistry ISWFPC 2009

• Year: 2009 -  Fatigue of copper at very high numbers of cycles

  Autoren: Schönbauer, B; Stanzl-Tschegg, S

  Event: 3rd ESIS TC2 Meeting 2009

• Year: 2009 -  Ultra lightweight cellulosic aerogels: Preparation and properties

  Autoren: Liebner, FW; Potthast, A; Rosenau, T; Haimer, E; Loidl, D; Tschegg, S; Neouze, MA; Maitz, M; Seib, P; Werner, C

  Event: 237th National Spring Meeting of the American Chemical Society ACS 2009

• Year: 2008 -  Mechanisms of Strain Localization, Crack Initiation and Fracture of Polycrystalline Copper in the VHCF-Regime

  Autoren: Stanzl-Tschegg,St., and Schönbauer,B.

  Event: 17th European Conference On Fracture ECF17 2008

• Year: 2008 -  Cellulose aerogels: Highly porous, ultralightweight biomaterials.

  Autoren: Liebner, F.; Haimer E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M. A.; Wendland, M.; Rosenau, T.

  Event: 235th American-Chemical-Society National Meeting 2008

• Year: 2008 -  Ultra light-weight aerogels from non-derivatized commercial pulps.

  Autoren: Liebner, F.; Haimer E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M. A.; Werner, C., Rosenau, T.

  Event: 10th European Workshop on Lignocellulosics and Pulp EWLP 2008

• Year: 2008 -  Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold

  Autoren: Weidner,A.,Amberger,D.,Pyczak,F.,Schönbauer,B.,Stanzl-Tschegg,St.,Mughrabi,H.

  Event: 17th European Conference On Fracture ECF17 2008

• Year: 2008 -  Plastische Verformung und Lebensdauer von polykristallinem Kupfer bei sehr hohen Lastwechselzahlen

  Autoren: Stanzl-Tschegg, S; Schönbauer, B

  Event: 29. Adelbodener Werkstoffseminar 2008

• Year: 2008 -  Preparation of cellulose aerogels from Lyocell dopes.

  Autoren: Liebner, F.; Haimer E.; Potthast, A.; Loidl, D.; Tschegg, S.; Neouze, M. A.; Wendland, M.; Rosenau, T.

  Event: 8th International Symposium Alternative Cellulose 2008 - Manufacturing, Forming, Properties

• Year: 2007 -  PSB threshold and fatigue limit of polycrystalline copper in the VHCF-regime

  Autoren: Stanzl-Tschegg, S; Schönbauer, B

  Event: 4th International Conference, Very High Cycle Fatigue VHCF-4 2007

• Year: 2007 -  Surface Energy and Wettability of Knots and Surrounding Area

  Autoren: Sinn Gerhard, Ters Thomas, Stanzl-Tschegg Stefanie

  Event: 3rd International Symposium on Wood Machining 2007

• Year: 2006 -  Numerical Modelling of Fracture Behaviour of Wood Subjected to Variable Humidity Conditions

  Autoren: Stanzl-Tschegg, S.

  Event: 7th World Congress on Computational Mechanics 2003

• Year: 2006 -  Change in the fracture mode and fracture properties of wood with moisture content

  Autoren: Stanzl-Tschegg, S.

  Event: International Conference on Integrated Approach to Wood Structure, Behaviour and Applications. Joint meeting of ESWM and COST Action E35 2006

• Year: 2006 -  Change in the fracture mode and fracture properties of wood with moisture content

  Autoren: Stanzl-Tschegg, S.

  Event: International Conference on Integrated Approach to Wood Structure, Behaviour and Applications. Joint meeting of ESWM and COST Action E35 2006

• Year: 2006 -  Analysis of cutting forces in circumferential flat milling of particle board

  Autoren: Sinn, G., Beer, P., Stanzl-Tschegg, S.

  Event: International Conference on Integrated Approach to Wood Structure, Behaviour and Applications. Joint meeting of ESWM and COST Action E35 2006

• Year: 2006 -  In-situ ESEM deformation studies of single wood cells

  Autoren: Eder, M., Burgert, I., Stanzl-Tschegg, S

  Event: 5th Plant Biomechanics Conference 2006

• Year: 2006 -  ECF16, Fracturing of wood under torsional loading. Fracture mechanisms and mechanics

  Autoren: Loidl, D., Tschegg, E.K., Stanzl-Tschegg, S.E.

  Event: European Conference of Fracture ECF16 2006

• Year: 2006 -  Life time and cyclic slip of copper in the VHCF regime

  Autoren: Stanzl-Tschegg, SE; Mughrabi, H; Schönbauer, B; Schuller, R

  Event: Fatigue Damage of Structural Materials VI

• Year: 2006 -  Scientific works of Cost E35 action

  Autoren: Stanzl-Tschegg, S.

  Event: XYLEXPO 2006

• Year: 2006 -  In-situ ESEM deformation studies of single wood cells

  Autoren: Eder, M., Burgert, I., Stanzl-Tschegg, S

  Event: 5th Plant Biomechanics Conference 2006

• Year: 2006 -  Experimental and numerical investigation of fracture mechanisms and fracture properties of wood at varying moisture contents

  Autoren: Vasic, S., Tschegg, S.

  Event: Marie Curie Conference 2006

• Year: 2006 -  Slip band formation and surface roughness of polycrystalline copper in the VHCF regime

  Autoren: Stanzl-Tschegg, S Schönbauer, B

  Event: Slip band formation and surface roughness of polycrystalline copper in the VHCF regime

• Year: 2006 -  Interaktion von Cr-Co-Mo Abrieb mit repassivierten TiO2 Oberflächen in der Endoprothetik

  Autoren: Tschegg, S.

  Event: 2. Wiener Biomaterialsymposium 2006

• Year: 2005 -  Environmental-assisted fatigue cracking of aluminium alloys at different frequencies

  Autoren: Stanzl-Tschegg, S.E., Holper, B., Mayer, H.

  Event: ICF 11 2005

• Year: 2005 -  Analysis of Cutting Forces in Circumferential flat milling of MDF and Particleboard

  Autoren: Sinn, G., Beer, P., Gindl, M., Patsch, R., Kisselbach, A., Standler, F., Stanzl-Tschegg, S.

  Event: 17th International Wood Machining Seminar 2005

• Year: 2005 -  Stress Relaxation in Wood Fibers and Tissues - Mechanical interaction of cell wall polymers

  Autoren: Eder, M., Burgert, I., Fratzl, P., Tschegg, S.

  Event: 17th International Wood Machining Seminar 2005

• Year: 2005 -  Investigations on the structure-function relationships in wood

  Autoren: Stanzl-Tschegg, S.

  Event: International Symposium on Wood Science and Technologie

• Year: 2005 -  Fracture mechanisms and properties of green wood subjected to opening mode I

  Autoren: Vasic, S., Tschegg, S.

  Event: COST Action E35: "Rosenheim Workshop"

• Year: 2005 -  Fracture and Microstructure of Wood

  Autoren: Stanzl-Tschegg, S.E., Frühmann, K.,Tschegg, E.K.

  Event: ICF 11 2005

• Year: 2005 -  In plane mode I fracture of particleboards

  Autoren: Sinn, G. Tschegg, S.

  Event: COST Action E35: "Rosenheim Workshop"

• Year: 2004 -  Finite Element Analysis of Tool Indentation into Melamine Coated Particleboard

  Autoren: Palubicki, B., Beer, P., Sinn, G., Stanzl-Tschegg, S.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  Influence of Ammonia Addition on Particleboard Properties

  Autoren: Kowaluk, G., Dziurka, D., Beer, P., Sinn, G., Stanzl-Tschegg, S.E.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  Wood (Micro-)Mechanics

  Autoren: Burgert, I., Tschegg, S., Frühmann, K., Fratzl, P., Keckes, J.

  Event: COST E20 Meeting 2004

• Year: 2004 -  Quality parameters of coated particleboards

  Autoren: Gindl, M., G. Sinn, U. Müller, S. Stanzl-Tschegg

  Event: Sustain Life – Secure Survival ll. Socially and Environmentally Responsible Agribusiness 2004

• Year: 2004 -  Continuous Hardness Testing for the Determination of Mechanical and Fracture Mechanical Properties of Laminated Particleboards

  Autoren: Gindl, M., Jeronimidis, G., Atkins, T., Stanzl-Tschegg, S.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  Proceedings of the 2nd International Symposium on Wood Machining. Properties of Wood and Wood Composites Related to Machining

  Autoren: Stanzl-Tschegg, S., Gindl, M., Sinn, G.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  Cell Wall Structure and Properties

  Autoren: Tschegg, S.

  Event: COST E20 Meeting 2004

• Year: 2004 -  Near threshold fatigue crack growth in aluminium alloys at low and ultrasonic frequency

  Autoren: Stanzl-Tschegg, S. E., Vasudevan, A.K.

  Event: International Conference on Fatigue Damage of Structural Materials V

• Year: 2004 -  Very high cycle fatigue of normalized steels

  Autoren: Zettl, B., Mayer, H., Stanzl-Tschegg, S.E.

  Event: 3rd International Conference on Very High Cycle Fatigue 2004

• Year: 2004 -  Application of Ultrasonic-Assisted Cutting in Wood Machining

  Autoren: Sinn, G., Mayer, H., Zettl, B., Ede, Ch., Beer, P., Stanzl-Tschegg, S.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  In-situ Synchrotron Studies of Structural Changes in Wood during Microtensile Tests

  Autoren: Keckes, J., Burgert, I., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S.V., Stanzl-Tschegg, S.E., Fratzl, P.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  Strain distribution in coated particle board during linear cutting measured by means of electronic speckle pattern interferometry

  Autoren: Müller, U., Gindl, M., Stretenovic, A., Teischinger, A., Stanzl-Tschegg, S.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  Microfibril angle in wood: Characterisation using X-Ray scattering and influence on mechanical properties.

  Autoren: Keckes, J., Burgert, I., Lichtenegger, H., Reiterer, A., Stanzl-Tschegg, S., Fratzl, P.

  Event: COST Action E20 Wood Fibre Cell Wall Structure

• Year: 2004 -  Surface Activation of Wood Using UV Light

  Autoren: Gindl, M., Cabaj, A., Schmalwieser, A., Hansmann, Ch., Eder, M., Sinn, G., Stanzl-Tschegg, S.E.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2004 -  Fatigue crack initiation and growth in low-weight alloys in the VHC regime

  Autoren: Mayer, H., Stanzl-Tschegg, S.

  Event: 15th Colloquium on Fundamental Fatigue Mechanisms 2004

• Year: 2004 -  Fatigue Crack Growth and Thresholds at Ultrasonic Frequencies (plenary lecture)

  Autoren: Stanzl-Tschegg, S.E.

  Event: 3rd International Conference on Very High Cycle Fatigue 2004

• Year: 2004 -  Strain distribution in coated particle board during linear cutting measured by means of electronic speckle pattern interferometry

  Autoren: Müller, U., Gindl, M., Sretenovic, A., Valla, A., Teischinger, A., Stanzl-Tschegg, S.

  Event: 2nd International Symposium on Wood Machining 2004 - Properties of Wood and Wood Composites Related to Machining

• Year: 2003 -  Fracture mechanical parameters for the TR - crack propagation system in wood

  Autoren: Frühmann, K., Burgert, I., Sinn, G., Stanzl-Tschegg, S.

  Event: 2nd International Conference of the ESWM 2003

• Year: 2003 -  Introduction to fatigue and fracture mechanics seminar

  Autoren: Stanzl-Tschegg, S.

  Event: Nagoya University; Department of Mech. Engineering

• Year: 2003 -  Poster #35: Mechanical properties of the underneath compression side of branches of beech (Fagus sylvatica L.)

  Autoren: Burgert, I., Rohr, C., Frühmann, K., Stanzl-Tschegg, S.

  Event: 4th International Plant Biomechanics Conference 2003

• Year: 2003 -  Besonderheiten der schwingenden Beanspruchung bei extrem hoher Lastspielzahl

  Autoren: Mayer, H., Stanzl-Tschegg, S.

  Event: Werkstoffprüfung 2003: Herausforderungen durch den industriellen Fortschritt

• Year: 2003 -  Use of ultrasonic fatigue in the very high cycle regime

  Autoren: Stanzl-Tschegg, S.

  Event: Kyushu University

• Year: 2003 -  Very high cycle fatigue

  Autoren: Stanzl-Tschegg, S.

  Event: Tokyo Institute of Technology (TITECH)

• Year: 2003 -  Fracture mechanical parameters for the TR - crack propagation system in wood

  Autoren: Frühmann, K., Burgert, I., Sinn, G., Stanzl-Tscheff, S.E.

  Event: 2nd International Conference of the ESWM 2003

• Year: 2003 -  Influence of Cutter Blunting on Milling of Particle-Board

  Autoren: Beer, P., Sinn, G., Müller, U., Gindl, M., Stanzl-Tschegg, S.

  Event: 16th international wood machining seminar 2003

• Year: 2003 -  Giga-cycle fatigue

  Autoren: Stanzl-Tschegg, S.

  Event: National Institute of Materials Science (NIMS)

• Year: 2003 -  Ultrasonic Fatigue and Fracture Mechanics

  Autoren: Stanzl-Tschegg, S.

  Event: Nagoya University; Department of Mech. Engineering

• Year: 2003 -  Structure and fracture mechanical response of wood

  Autoren: Stanzl-Tschegg, S.

  Event: 4th International Plant Biomechanics Conference 2003

• Year: 2003 -  Gigacycle fatigue and fatigue crack growth

  Autoren: Stanzl-Tschegg, S.

  Event: ATEM 2003

• Year: 2002 -  In-situ tensile tests on wood slices: characterisation of structural changes using wide-angle x-ray scattering

  Autoren: Stanzl-Tschegg, S.

  Event: COST Action E20 "Wood Fiber Cell Wall Structure"

• Year: 2002 -  Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining

  Autoren: Stanzl-Tschegg, S.

  Event: Unknown

• Year: 2002 -  Cellulose microfibril angle and tensile properties of wood

  Autoren: Stanzl-Tschegg, S.

  Event: COST Action E20 "Wood Fiber Cell Wall Structure"

• Year: 2002 -  Wood Modification for higher Quality Composites

  Autoren: Hinterstoisser, B.*, Burgert, I., Fackler, K., Galhaup, C., Haltrich, D., Kuncinger, T., Messner, K., Schwanninger, M., Srebotnik, E., Steinwender, M., Stefke, B., Tschegg, S.

  Event: International Symposium on Wood Based Materials, Wood Composites and Chemistry, COST Action E13, 2002

• Year: 2002 -  Cutting performance of panels regarding tools / material interaction

  Autoren: Gindl, M., Beer, P., Patsch, R., Ede, Ch., Stanzl-Tschegg, S.E.

  Event: III. Chip and Chipless Woodworking Process

• Year: 2002 -  Cutting tests of laminated particle board regarding work of fracture and chips plastic deformation

  Autoren: Beer, P., Ede, Ch., Gindl, M., Stanzl-Tschegg, S.E.

  Event: ICWSE Conference 2002 - Wood Science and Engineering in the Millenium

• Year: 2002 -  The Environment Effect on Fatigue Crack Growth of 7049 Aluminium Alloy at Negative Stress Ratios

  Autoren: Fonte, M., Romeiro, F., De Freitas, M., Stanzl-Tschegg, S., Tschegg, E., Vasudevan, A.

  Event: 8th PORTUGUESE CONFERENCE ON FRACTURA

• Year: 2002 -  UV- Behandlung von Synthetischen- und Naturpolymeren

  Autoren: Gindl, M., Cabaj, A., Sinn, G., Schmalwieser, A., Eder, M., Stanzl-Tschegg, S.

  Event: V. Materialphysikalisches Symposium

• Year: 2002 -  Cutting tests of laminated particle board regarding work of chips plastic deformation

  Autoren: Beer, P., Ede, C., Gindl, M., Stanzl-Tschegg, S.

  Event: ICWSE Conference 2002 - Wood Science and Engineering in the Millenium

• Year: 2002 -  Fracture mechanics and micromechanics of wood and wood-composites with regard to wood machining

  Autoren: Stanzl-Tschegg, S.

  Event: 20th Meeting of the Technical Committee on Forests and Forestry Products 2002 COST

• Year: 2001 -  Fracture characteristics of wood under mode I, mode II and mode III loading

  Autoren: Frühmann, K., Reiterer, A., Tschegg, E.K., Stanzl-Tschegg, S.E.

  Event: International Conference on Fundamentals of Fracture

• Year: 1999 -  Damage and Fracture Mechanisms during Mode I and III Loading in Wood

  Autoren: Tschegg, E., Frühmann, K., Stanzl-Tschegg, S.E.

  Event: COST 98 Workshop - Damage in Wood

• Die Nanostruktur der Holzzellwand: vier heimische Holzarten im Vergleich.

  Autoren: Lichtenegger, H., Reiterer, A., Tschegg, S., Fratzl, P.

• Present and future trends in Austrian wood quality research.

  Autoren: Teischinger, A., Tschegg, S.

• Damage and Fracture Mechanisms during Mode I and III Loading in Wood.

  Autoren: Tschegg, E., Frühmann, K., Tschegg, S.E.

• Überblick über die Arbeiten am CD-Labor für Grundlagen der Holzbearbeitung.

  Autoren: Stanzl-Tschegg, S.E.

• Bruchmechanische Charakterisierung von Holz und Holzwerkstoff.

  Autoren: Tschegg, S.

• Struktur und Eigenschaften von Holz hinsichtlich seiner Belastbarkeit.

  Autoren: Tschegg, S.

• The environment effect on Fatigue Crack Growth of 7049 aluminium alloy at negative stress ratios.

  Autoren: da Fonte, M., A., Romeiro, F., de Freitas, M., M., Stanzl-Tschegg, S., Tschegg, E., Vasudevan, A.

• Prothesenhalsfraktur bei Hüftendoprothesen - eine Analyse von 6 Fällen.

  Autoren: Krepler, P., Wurnig, Ch., Tschegg, S.E.

• Life time and fatigue crack growth at very high numbers of cycles.

  Autoren: Tschegg, S.

• Untersuchung von Interface-Bindung und Biokompatibilität von Kieferimplantaten.

  Autoren: Rödhammer, M., Reiterer, A., Stanzl-Tschegg, S.E.

• Surfaces of improved implants.

  Autoren: Papakyriacou, M., Stanzl-Tschegg, S. E

• Implant Failure of the Gamma Nail.

  Autoren: Gäbler, C., Heinz, T., Kulka, C., Wozasek, G.E., Tschegg, S.E., Tschegg, E.K., Vecsei, V.

• Bemerkungen zur Umfrage "Wissenschaft in der öffentlichen Wahrnehmung"; Frauen an den Universitäten

  Autoren: Tschegg, S.

• Characterization of wood fracture and reliability.

  Autoren: Tschegg, S.

• Present and future trends in Austrian wood quality research.

  Autoren: Teischinger, A., Tschegg, S.

• Grundlagen der Zerspanung

  Autoren: Tschegg, S.

• Is there a fatigue limit.

  Autoren: Stanzl-Tschegg, S., Bathias, C., Topper, T.

• Fatigue Properties of Implant Materials - Measuring Techniques and SN-Results.

  Autoren: Stanzl-Tschegg, S.E., Papakyriacou, M

• Frequency effects on fatigue and fatigue crack growth in the very-high cycle regime.

  Autoren: Tschegg, S.

• Healing Behaviour of Reflective Cracks.

  Autoren: Tschegg, E.K., Catharin, A., Stanzl-Tschegg, S.E.

• Fatigue and Fatigue Crack Growth of Aluminium Alloys of Very High Numbers of Cycles.

  Autoren: Tschegg, S.E., Mayer, H.R., Zettl, B.

• Wood induced electrochemical corrosion of steel.

  Autoren: Beer, P., Kaminski, J., Wierzchon, T., Sokolowska, A., Tschegg, S.

• Spiral Angles of Elementary Cellulose Fibrils and Tensile Properties of Spruce Wood.

  Autoren: Reiterer, A., Lichtenegger, H., Stanzl-Tschegg, S.E., Fratzl, P.

• Fracture Mechanics and Micromechanics of Wood and Wood Composites with Regard to Wood Machining.

  Autoren: Tschegg, S., Burgert, I.

• Fatigue properties of high pressure die cast magnesium alloys.

  Autoren: Mayer, H., Rösch, R., Lipowsky, H., Zettl, B., Papakyriacou, M., Stanzl-Tschegg, S.E.

• Fatigue and vibration properties of aluminium foam.

  Autoren: Zettl, B., Stanzl-Tschegg, S. E.

• Bruchmechanische Konzepte in der Holzforschung.

  Autoren: Reiterer, A., Stanzl-Tschegg, S.E.

• The Environment Effect on fatigue Crack Growth Rates in 7049 Aluminium Alloy at Different Load Ratio.

  Autoren: Fonte, M., Holper, B., Tschegg, S., Tschegg, E., Vasudevan, A.

• Fatigue and Fatigue Crack Growth of Aluminium Alloys.

  Autoren: Stanzl-Tschegg, S.E., Mayer, H.R.

• Holzeigenschaften und Struktur, Bruchmechanik von Holz und Holzwerkstoffen, Charakterisierung von Holzoberflächen.

  Autoren: Stanzl-Tschegg, S.E.

• Characterization of the Properties of Wood and Wood Products by Combination of Different Experimental Methods.

  Autoren: Stanzl-Tschegg, S.E.

• High Cycle Fatigue Crack Growth Properties of Aramid Reinforced Aluminium Laminates:

  Autoren: Stanzl-Tschegg, S.E., Papakyriacou, M., Mayer, H., Schijve, J.

• Brucheigenschaften und Struktur von Holz.

  Autoren: Tschegg, S.E.