Johannes Konnerth
Univ.Prof. Dipl.-Ing. Dr. Johannes Konnerth
Institute of Wood Technology and Renewable Materials
Location Konrad Lorenz-Straße 24, 3430 Tulln an der Donau
Email johannes.konnerth@boku.ac.at
Tel: +43 1 47654-89159
Projects
0 Projects found.
Publications
Knowledge Transfer to Society
Media
Presentations
Year: 2024 - Mechanical treatments of plant proteins for their utilization as wood adhesives
Autoren: Malik, R; Konnerth, J; Van Herwijnen, H; Tran, A
Event: 67th SWST International Convention 2024
Year: 2024 - Towards a complete technological profile of hardwood branches for structural use: Case study on Poisson's ratio
Autoren: Nenning, T; Konnerth,J; Gindl-Altmutter, W; Grabner, M; Hansmann, C; Pramreiter, M
Event: 11th Hardwood Conference 2024
Year: 2024 - From Branch to Beam: Transforming underutilized branch wood into structural building materials
Autoren: Nenning, TJ; Tockner, A; Hansmann, C; Grabner, M; Konnerth, J; Gindl-Altmutter, W; Pramreiter, M;
Event: 26th World Congress - Forests and Society Towards 2050
Year: 2024 - Entwicklung neuer Holzwerkstoffe - UniStrand & Co
Autoren: Konnerth, J; Pramreiter, M
Event: Holztage Cowerk x Holzcluster
Year: 2024 - Wood adhesives based on proteins
Autoren: Malik, R; Gabler, C; Tran, A; Konnerth, J; Van Herwijnen, H
Event: Österreichische Chemietage 2024
Year: 2024 - Back in Black – AC/DC electrical measurements of adhesive wood bondlines modified with carbon fillers
Autoren: Suarez, S; Vasiljevic, M; Konnerth, J; Riegler, M; Tran, A
Event: 20th Annual Meeting of the Northern European Network for Wood Science and Engineering
Year: 2024 - Effiziente Ressourcennutzung für den Holzbau
Autoren: Gindl-Altmutter, W; Konnerth, J
Event: 28. Internationales Holzbau-Forum (IHF) 2024
Year: 2024 - Effects of chemical denaturation and mechanical homogenization of plant proteins
Autoren: Rohrhuber, S; Malik, R; Van Herwijnen H; Konnerth, J; Tran, A
Event: 67th SWST International Convention 2024
Year: 2024 - Electrical and Mechanical Characterisation of Adhesive Functionalised with Electrically Conductive Fillers
Autoren: Suarez, S; Konnerth, J; Vasiljevic, M; Riegler, M; Tran, A
Event: 67th SWST International Convention 2024
Year: 2024 - How wood species influence the curing speed of adhesives used in panel production
Autoren: Fasalek, A
Event: 67th SWST International Convention 2024
Year: 2024 - New material concepts for hardwood
Autoren: Konnerth, J; Nenning, T; Pramreiter, M
Event: 10th International Hardwood Conference 2024
Year: 2024 - Strip-like laminations. Promoting hardwood use in structural wood products
Autoren: Lux, S; Konnerth, J; Neumüller, A
Event: 10th International Hardwood Conference 2024
Year: 2024 - Holz und Hygiene - antibakterielles Verhalten von Holz
Autoren: Stingl, R; Domig, K; Konnerth, J
Event: MK PÖCHLARN - Meisterschule für Tischler
Year: 2023 - Farbe und Farbmessung
Autoren: Stingl, R; Konnerth, J;
Event: MK PÖCHLARN - Meisterschule für Tischler
Year: 2023 - Innovationskurve Holzbauwerkstoffe - Rettet Laubholz den Holzbau?
Autoren: Konnerth, J; Pramreiter, M;
Event: Bauen mit dem Wald, Koalition für Holzbau
Year: 2023 - Unidirektional ausgerichtete Strand-Platten für Kreuzlagenholz
Autoren: Malzl Lukas, Pramreiter Maximilian, Konnerth Johannes
Event: 15. Holzwerkstoffkolloquium
Year: 2023 - Verklebbarkeit von alternativen Holzarten mit pMDI und modifizierten MDI Klebstoffen
Autoren: Fasalek, A; Pramreiter, M; van Herwijnen, H; Konnerth, J;
Event: 15. Holzwerkstoffkolloquium
Year: 2023 - Rheological characterisation of functionalised wood adhesive with different conductive fillers
Autoren: Suarez, S; Konnerth, J
Event: 2nd Annual Conference of the Austrian Society for Rheology 2024
Year: 2022 - Scale-Up of 5-hydroxymethylfurfural-rich adhesive precursor production and structural features of humin side products
Autoren: Sailer-Kronlachner, W.; Rosenfeld, C.; Konnerth, J.; Böhmdorfer, S.; Bacher, M.; Rosenau, T.; Potthast, A.; Geyer, A.; van Herwijnen, H.W.G.;
Event: 19. Österreichische Chemietage - Joint Meeting of German & Austrian Chemical Societies
Year: 2022 - Effect of Hydroxymethylfurfural on the cure speed in fructose-based adhesives for interior particleboards
Autoren: Rosenfeld, C.; Sailer-Kronlachner, W.; Konnerth, J.; Geyer, A.; van Herwijnen, H.W.G.;
Event: 19. Österreichische Chemietage - Joint Meeting of German & Austrian Chemical Societies
Year: 2022 - Biobasierte Klebstoffe für die Holzindustrie
Autoren: Konnerth, J; van Herwijnen, H;
Event: Innovationsplattform Bioökonomie und Kreislaufwirtschaft: Biobasierte Klebstoffe und Beschichtungen für technische Anwendungen
Year: 2022 - Holz und Hygiene
Autoren: Stingl, R; Konnerth, J; Domig, K;
Event: MK PÖCHLARN - Meisterschule für Tischler in Pöchlarn
Year: 2022 - Mechanical Mapping of Lignocellulosic Surfaces
Autoren: Gusenbauer, C; Konnerth, J
Event: Bruker EU Material AFM User Meeting 2022?
Year: 2022 - The predictive quality of radial compression strength for vulnerability to cavitation
Autoren: Rosner, S.; Luss, S.; Konnerth, J.; Kunert, N.
Event: 5. Xylem International Meeting 2022
Year: 2022 - Temperature and moisture dependent rheological cure characterization of wood adhesive
Autoren: Tran, A; Konnerth, J; Gindl-Altmutter W
Event: International Conference on Wood Adhesives 2022
Year: 2022 - Development of an in-situ approach towards sustainable, carbohydrate-based adhesives
Autoren: Sailer-Kronlachner, W; Rosenfeld, C; Bacher, M; Böhmdorfer, S; Konnerth, J; Geyer, A; van Herwijnen, H.W.G,
Event: International Conference on Wood Adhesives ICWA 2022
Year: 2022 - Effect of Hydroxymethylfurfural on the Cure Speed in Fructose-based Adhesives for Interior Particleboards
Autoren: Rosenfeld, C; Sailer-Kronlachner, W; Konnerth, J; Geyer, A; van Herwijnen, H.W.G.
Event: International Conference on Wood Adhesives ICWA 2022
Year: 2022 - Characterization of flexible melamine-urea-formaldehyde adhesives for CLT applications
Autoren: Ramachandrareddy, B; van Herwijnen, HWG; Beck, G; Bredesen, R; Konnerth J
Event: International Conference on Wood Adhesives ICWA 2022
Year: 2021 - Ressourceneffiziente Holzwerkstoffe - Stand Der Technik Und Wege in Die Zukunft
Autoren: Pramreiter, M; Höchtl, S; Mayencourt, P; Müller, U; Gindl-Altmutter, W; Konnerth, J
Event: 14. Holzwerkstoffkolloquium
Year: 2021 - Adhesive strength for structural wood applications bonded at low temperature
Autoren: Tran, A; Mayr M.; Konnerth, J; Gindl-Altmutter W
Event: 6th International Conference on Structural Adhesive Bonding AB 2021
Year: 2021 - Additives as a modification tool for water-based polyvinyl acetate (PVAc) adhesives
Autoren: Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J
Event: 6th International conference on structural adhesive bonding 2021
Year: 2021 - Opportunities and challenges coming with hardwood use for structural applications
Autoren: Konnerth, J; Huber, C; Bliem, P; Obernosterer, D; Solt-Rindler, P; Jeitler, G; Grabner, M; Müller, U; van Herwijnen, H; Pramreiter, M;
Event: 9th Hardwood Conference 2021
Year: 2021 - Improving polymerized lignin properties using green plasticizers.
Autoren: Jimenez Bartolome, M; Bischof, S; Pellis, A; Konnerth, J; Wimmer, R; Weber, H; Schwaiger, N; Guebitz, G.M.; Nyanhongo, G. S.
Event: International Conference on Renewable Resources and Biorefineries.
Year: 2021 - Advanced Atomic Force Microscopy for Analyzing Wood Surfaces
Autoren: Gusenbauer, C; Cabane , E; Xu, X G; Konnerth, J
Event: Salzburg Conference for Smart Materials 2021
Year: 2021 - Chemorheological analysis and rheokinetic study of carbohydrate-hydroxymethylfurfural-amine adhesive
Autoren: Thoma, Catherine; Solt-Rindler, Pia; Sailer-Kronlachner, Wilfried; Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Pellis, Alessandro; van Herwijnen, Hendrikus W. G.
Event: EURADH 2021
Year: 2021 - Factors influencing open-assembly time of polyvinyl acetate (PVAc) adhesives
Autoren: Bliem, P; van Herwijnen, HWG; Stadlbauer, W; Meissl, R; Konnerth, J
Event: 6th International Conference on Structural Adhesive Bonding AB 2021
Year: 2021 - Reactive adhesives derived from carbohydrate-based precursors
Autoren: Thoma, Catherine; Sailer-Kronlachner, Wilfried; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, Hendrikus W. G.
Event: EURADH 2021
Year: 2021 - Transdermal NSAID release patches made from anisotropic 2,3-dicarboxycellulose hydrogel membranes
Autoren: Liebner, F; Plappert, S; Konnerth, J; Nedelec, JM
Event: National Spring Meeting of the American Chemical Society ACS 2021 - Macromolecular Chemistry: The Second Century
Year: 2021 - I-beams based on wood particles using a novel non cutting disintegration technology
Autoren: Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Mauritz, R; Konnerth, J
Event: SCSM21-Salzburg Conference for Smart Materials 2021
Year: 2021 - Lab-scale testing of carbohydrate-based adhesives for wood-based products
Autoren: Thoma, Catherine; Sailer-Kronlachner, Wilfried; Solt-Rindler, Pia, Rosenau, Thomas; Potthast, Antje; Konnerth, Johannes; Geyer, Andreas; van Herwijnen, H.W.G.
Event: EFIB 2021
Year: 2021 - Temperature and moisture dependent curing behavior with rheological method for wood
Autoren: Tran, A; Konnerth, J; Gindl-Altmutter, W
Event: Salzburg Conference for Smart Materials 2021
Year: 2021 - Functionalized wood & the role of advanced analytics.
Autoren: Konnerth, J; Gusenbauer, C;
Event: Salzburg Conference for Smart Materials 2021
Year: 2021 - Reduction of formaldehyde-based adhesives in plywood production by adding renewable additives
Autoren: Hogger, E M; Konnerth, J; Moser, J; Kantner, W; van Herwijnen, H W G;
Event: 1st International Salzburg Conference for Smart Materials 2021
Year: 2020 - Simultaneous Chemical and Topographical Mapping of Wood Ultrastructures by Chemical Force Microscopy
Autoren: Gusenbauer, C; Cabane, E; Nypelö, T; Konnerth, J
Event: SWST International Convention 2020
Year: 2020 - The importance of cold tack of urea formaldehyde in plywood production
Autoren: Elfriede Hogger, Hendrikus W. G. van Herwijnen, Johann Moser, Wolfgang Kantner, Johannes Konnerth
Event: SWST 2020 Convention
Year: 2020 - Systematic evaluation of wheat flour, wheat starch and wheat protein in urea and phenol formaldehyde resins
Autoren: Elfriede Hogger, Hendrikus W. G. van Herwijnen, Wolfgang Kantner, Johann Moser, Johannes Konnerth
Event: SWST 2020 Convention
Year: 2020 - Anisotropic nanocellulose gel membranes for drug delivery: tailoring structure and interface by sequential periodate - chlorite oxidation
Autoren: Plappert, S; Konnerth, J; Nedelec, JM; Liebner, F
Event: International Conference on Aerogels for Biomedical and Environmental Applications
Year: 2020 - Manufacturing and Optimization of a Cellulose-Based “Green” High-Performance Material
Autoren: Matthias Jakob, Ivana Czabany, Johannes Konnerth, Wolfgang Gindl-Altmutter
Event: SWST International Convention 2020
Year: 2020 - Low Temperature Adhesive Bonding for Structural Wood Materials
Autoren: Tran, A; Mayr, M; Konnerth, J; Gindl-Altmutter, W
Event: SWST International Convention 2020
Year: 2020 - Chemical mapping of lignocellulosic substrates via chemical force microscopy
Autoren: Claudia Gusenbauer, Etienne Cabane, Johannes Konnerth
Event: XXII. Annual Linz Winter Workshop
Year: 2019 - Wood adhesives based on domestic plant proteins
Autoren: Averina, E; van Herwijnen, HWG; Konnerth, J;
Event: 18. Österreichische Chemietage 2019
Year: 2019 - Einfluss der Kaltklebrigkeit auf die Vernetzung von Harnstoff-Formaldehyd-Harzen bei der Herstellung von Sperrholz
Autoren: Hogger, E; van Herwijnen, HWG; Kantner, W; Moser, J; Konnerth, J;
Event: 13. Holzwerkstoffkolloquium 2019
Year: 2019 - Optimisation of drying and curing parameters of PF impregnated wood
Autoren: Bliem, P; Frömel-Frybort, S; Gartner, C; Konnerth, J; Mauritz, R; van Herwijnen, HWG;
Event: 5th International conference on structural adhesive bonding 2019
Year: 2019 - Force Microscopy to reveal chemical properties of lignocellulosic materials up to the nanometer scale
Autoren: Claudia Gusenbauer, Tiina Nypelö, Etienne Cabane, Johannes Konnerth
Event: The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC)
Year: 2019 - Surface and adhesion properties of lignocellulosic model fibers.
Autoren: Konnerth, J; Colson, J; Pettersson, T; Nypelö, T; Sixta, H; Shirin, A; Kneidinger, G; Gusenbauer, C;
Event: The 20th International Symposium on Wood, Fiber, and Pulping Chemistry (ISWFPC)
Year: 2019 - Knowledge-based Curing of Phenolic Wood Adhesives.
Autoren: Bliem, P; Gartner, C; Konnerth, J; Solt, P; Mauritz, R; van Herwijnen, HWG;
Event: 18. Österreichische Chemietage 2019
Year: 2019 - Hydroxymethylfurfural: Production and application in binder-systems
Autoren: Thoma, C.; Sailer-Kronlachner, W.; Solt, P.; Konnerth, J.; van Herwijnen, H.W.G.
Event: 18. Österreichische Chemietage 2019
Year: 2019 - Engineering of material properties by adhesive selection at the example of a novel structural wood material
Autoren: Bliem, P; Frömel-Frybort, S; van Herwijnen, HWG; Krenke, T; Mauritz, R; Konnerth, J;
Event: 5th International conference on structural adhesive bonding 2019
Year: 2019 - Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers I: Mechanical properties
Autoren: Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U;
Event: 5th International conference on structural adhesive bonding 2019
Year: 2019 - Effect of cold tack on the bond strength of UF resins in plywood production
Autoren: Hogger, E; van Herwijnen, H W G; Kantner, W; Moser, J; Konnerth, J;
Event: 13. Holzwerkstoffkolloquium 2019
Year: 2019 - Adhesive related warping of thin wooden bi-layers
Autoren: Rindler, A; Vay, O; Hansmann, C; Konnerth, J;
Event: 5th International conference on structural adhesive bonding 2019
Year: 2019 - Thermal superinsulating monolithic lignin-phenol-formaldehyde aerogels and carbon aerogels of high internal surface
Autoren: Budjav, E; Ghorbani, M; Konnerth, J; Mitterer, C; Unterweger, C; Rigacci, A; Ilbizian, P; Rennhofer, H; Lichtenegger, H; Bernstorff, S; Liebner, F
Event: 1st International Lignin Symposium
Year: 2019 - Influence of polymer/filler composition and processing on the properties of multifunctional adhesive wood bonds from polyurethane prepolymers II: Electrical properties.
Autoren: Winkler, C; Konnerth, J; Gibcke, J; Schwarz, U;
Event: 5th International conference on structural adhesive bonding 2019
Year: 2019 - Development of novel carbohydrate-based binders for wood composites
Autoren: Sailer-Kronlachner, W; Thoma, C; Solt, P; Konnerth, J; van Herwijnen, HWG;
Event: 18. Österreichische Chemietage 2019
Year: 2019 - The importance of cold tack of urea formaldehyde in plywood production
Autoren: Elfriede Hogger, Hendrikus W. G. van Herwijnen, Wolfgang Kantner, Johann Moser, Johannes Konnerth
Event: 15th Annual Meeting of the Northern European Network for Wood Science and Engineering WSE 2019
Year: 2019 - Hydroxymethylfurfural: production and application in binder-systems
Autoren: Thoma, C; Sailer-Kronlachner, W; Solt, P; Konnerth, J; van Herwijnen, HWG;
Event: 18. Österreichische Chemietage 2019
Year: 2018 - Polysaccharide film as a ductile substrate for gas phase treatment
Autoren: Nypelo, T; Amer, H; Konnerth, J; Potthast, A; Rosenau, T
Event: 255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water
Year: 2018 - Colloidal probe technique applied to the assessment of adhesion forces between lignocellulosic fibres and polymers
Autoren: Colson, J; Pettersson, T; Asaadi, S; Sixta, H; Nypelö, T; Konnerth, J
Event: 16th Conference of the International Association of Colloid and Interface Scientists (IACIS)
Year: 2018 - Conformal ultrathin coating by scCO2-mediated PMMA deposition: A facile approach to add moisture resistance to lightweigth ordered nanocellulose aerogels
Autoren: Plappert, S; Quraishi, S; Nedelec, J-M; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, F
Event: 1st Vienna Polymer-Group Symposium ViP 2018
Year: 2018 - Thermo-induced gelation of ligneous resole resins: An approach towards mesoporous monolithic aerogels and carbon aerogels
Autoren: Budjav, E; Requejo-Silva, A; Ghorbani, M; Konnerth, J; Liebner, F
Event: 1st Vienna Polymer-Group Symposium ViP 2018
Year: 2018 - Structural hardwood bonding and the impact of wood accessory compounds
Autoren: Bockel, S; Harling, S; Konnerth, J; Niemz, P; Pichelin, F;
Event: 8th Hardwood Conference 2018
Year: 2018 - Monitoring of time dependent ammonia emissions in smoked oak using FTIR spectroscopy.
Autoren: Hogger, E; Bauer, K; Höllbacher, E; Gierlinger, N; Konnerth, J; van Herwijnen H W G;
Event: 8th Hardwood Conference 2018
Year: 2018 - Chemical Force Microscopy for characterising functionalised renewable materials.
Autoren: Gusenbauer, C; Colson, J; Nypelö, T; Cabane, E; Konnerth, J;
Event: Wood Nanotechnology Conference 2018
Year: 2018 - Imparting moisture resistance to transparent nematic i-CNF aerogels by scCO2-antisolvent coating of the interior with ultrathin PMMA layers
Autoren: Plappert, S; Quraishi, S; Nedelec, JM; Konnerth, J; Rennhofer, H; Lichtenegger, H; Liebner, FW
Event: 255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water
Year: 2018 - Tunable surface energy wood-biopolymer macrofibers
Autoren: Nypelo, T; Asaadi, S; Kneidinger, G; Sixta, H; Konnerth, J
Event: 255th National Spring Meeting of the American Chemical Society ACS 2018 - Nexus of Food, Energy, and Water
Year: 2017 - Analysis of the cold tack of urea formaldehyde resin as an important factor in birch plywood production.
Autoren: Hogger, E; van Herwijnen, H. W. G; Moser, J; Kantner, W; Konnerth, J;
Event: International Panel Products Symposium IPPS 2017
Year: 2017 - Dimensional stability of wood based panels - Contibutions of the adhesive
Autoren: Rindler, A; Hansmann, C; Müller, U; Konnerth, J
Event: IUFRO Division 5 Conference, SWST 60th International Convention 2017
Year: 2017 - The impact of molecular weight of Kraft-lignin on adhesive performance of lignin based phenol formaldehyde resins.
Autoren: Solt, P; Konnerth, J; van Herwijnen, HWG;
Event: 11th International Conference on Wood Adhesives
Year: 2017 - Neue Analysemethoden zur Charakterisierung der chemisch/physikalischen Oberflächeneigenschaften auf Mikroebene
Autoren: Konnerth, J; Herzele, S; Nypelö, T; Colson, J; Van Herwijnen, H; Gindl-Altmutter, W
Event: Swiss Wood Innovation Network, Statusseminar
Year: 2017 - Mechanical contribution of the adhesive layer to the dimensional stability of multi-layered wood based panels.
Autoren: Rindler, A; Konnerth, J; Hansmann, C; Müller, U
Event: CompWood 2017
Year: 2017 - Comparison of direct adhesion of thermoplastic polymers to lignocellulosic model fibers.
Autoren: Konnerth, J; Colson, J; Kneidinger, G; Asaadi, S; Sixta, H; Gindl-Altmutter, W; Nypelö, TE;
Event: 11th International Conference on Wood Adhesives
Year: 2017 - Synthesis, properties and carbonization of different types of ligneous aerogels
Autoren: Budjav, E; Quraishi, S; Ghorbani, M; Konnerth, J; Unterweger, C; Liebner, FW
Event: 253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes
Year: 2017 - Effect of pressing temperature and moisture content on the curing properties of pMDI
Autoren: Solt, P; Libowitzky, S; van Herwijnen, HWG; Konnerth, J;
Event: 11th International Conference on Wood Adhesives
Year: 2017 - Wood-based hemicelluloses as renewable source for functional materials
Autoren: Nypelo, T; Amer, H; Laine, C; Tammelin, T; Konnerth, J; Henniges, U; Potthast, A; Rosenau, T
Event: 253rd National Spring Meeting of the American Chemical Society ACS 2017 - on Advanced Materials, Technologies, Systems, and Processes
Year: 2017 - Comparable technological evaluation of formaldehyde-free adhesives for the particle board production.
Autoren: van Herwijnen, HWG; Solt, P; Gindl-Altmutter, W; Konnerth, J;
Event: 11th International Conference on Wood Adhesives
Year: 2017 - Dimensional stability – Contributions of the adhesive layer
Autoren: Rindler, A; Konnerth, J; Müller, U
Event: IUFRO Division 5 Conference, SWST 60th International Convention 2017
Year: 2017 - Local adhesion testing on lignocellulosic fibers with Nanoindentation.
Autoren: Herzele, S; van Herwijnen, HWG; Gindl-Altmutter, W; Konnerth, J;
Event: 11th International Conference on Wood Adhesives
Year: 2017 - Thermo-induced gelation of diluted ligneous resole resin pre-condensates in ethylene glycol: A facile approach towards highly open mesoporous monolithic aerogels and carbon aerogels
Autoren: Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Konnerth, J; Liebner, F
Event: International Conference Renewable Plant Resources 2017 - Chemistry, Technology, Medicine
Year: 2017 - The influence of lignin properties on the performance of lignin-phenolic adhesives
Autoren: Solt, P; Ghorbani, M; Konnerth, J; Liebner, F; Van Herwijnen, H
Event: 17. Österreichische Chemietage 2017
Year: 2017 - Influencing Factors On The Cold Tack Of Urea Formaldehyde Used For Birch Plywood
Autoren: Hogger, E; Konnerth, J; van Herwijnen, HWG;
Event: 11th International Conference on Wood Adhesives
Year: 2016 - Adhesion force measurements applied to wood-based materials
Autoren: Nypelö, T; Andorfer, L; Konnerth, J
Event: 14th European Workshop on Lignocellulosics and Pulp 2016
Year: 2016 - Bonding performance of modified wood - distinctive influence of plasma pre-treatments on bonding strength
Autoren: Lütkemeier, B.; Konnerth, J.; Militz, H.
Event: World Conference on Timber Engineering WCTE 2016
Year: 2016 - Local Adhesion Testing on Lignocellulosic Fibres with Nanoindentation – A Sample Preparation Technique
Autoren: Herzele, S; Gindl-Altmutter, W; van Herwijnen, E; Konnerth, J
Event: International Academy of Wood Science Plenary Meeting, IAWS 2016
Year: 2016 - AFM adhesion force measurements applied to wood-based materials I
Autoren: Nypelö, T; Andorfer, L; Konnerth, J
Event: IX Iberoamerican Congress on Pulp and Paper Research "Building bridges in research and innovation for the sustainable bioeconomy" September 4-8, 2016
Year: 2016 - Planing quality of glulam lamellae and its impact on bonding quality and fracture surface characteristics
Autoren: Grüll, G; Wegscheider, A; Konnerth, J; Teischinger, A; Neumüller, A
Event: World Conference on Timber Engineering WCTE 2016
Year: 2016 - Lignin phenol formaldehyde resole resin: synthesis and characteristics
Autoren: Ghorbani, M; Mahendran, AR; Van Herwijnen, H; Liebner, F; Konnerth, J
Event: 2nd World Congress on Biopolymers 2016
Year: 2016 - Step-reaction vs. chain-reaction polymerization of lignin: two facile approaches towards lignin aerogels and carbon aerogels
Autoren: Budjav, E; Ghorbani, M; Requejo-Silva, A; Unterweger, C; Liebner, F
Event: 3rd International Aerogel Seminar
Year: 2016 - Converting wood into timber and particles - new approaches
Autoren: Mueller, U; Vay, O; Martinez-Conde, A; Frybort, S; Krenke, T; Konnerth, J; Teischinger, A
Event: World Conference on Timber Engineering WCTE 2016
Year: 2016 - Thermo-induced gelation of ligneous resole resin pre-condensates in ethylene glycol: An approach towards mesoporous monolithic aerogels of high internal surface
Autoren: Budjav, E; Requejo, A; Ghorbani, M; Konnerth, J; Liebner, F
Event: 14th European Workshop on Lignocellulosics and Pulp 2016
Year: 2016 - Performance of Lignin-Phenol-Formaldehyde Adhesives using various Lignin sources
Autoren: Konnerth, J; Ghorbani, M; Van Herwijnen, E; Budjav, E; Liebner, F;
Event: American Chemical Society, 251st National Meeting
Year: 2016 - Structure-property relation of films of cellulose nanofibrils containing renewable additives established by chemical mapping
Autoren: Nypelö, T; Laine, C; Henniges, U; Konnerth, J; Tammelin, T
Event: 251st National Spring Meeting of the American Chemical Society ACS 2016
Year: 2016 - Lignin phenol formaldehyde resole resin: Synthesis and characteristics
Autoren: Ghorbani, M; Liebner, F; van Herwijnen, E; Konnerth, J
Event: 4th Symposium on Biotechnology applied to Lignocelluloses
Year: 2015 - Selected characteristics of lignin-phenol-formaldehyde resole adhesives.
Autoren: Ghorbani, M; Liebner, F; Van Herwijnen, E; Pfungen, L; Krahofer, M; Konnerth, J;
Event: Innovations in Wood Material and Processes InWood 2015
Year: 2015 - Synthesis and Characteristics of Lignin-Phenol-Formaldehyde Resole Adhesives. , Sept. 09-11, Vienna, Austria
Autoren: Ghorbani, M; Liebner, F; Van Herwijnen, E; Pfungen, L; Krahofer, M; Konnerth, J;
Event: 18th International Symposium on Wood, Fiber and Pulping Chemistry ISWFPC 2015
Year: 2015 - Glueing melamine treated wood
Autoren: Lütkemeier, B; Konnerth, J; Militz, H
Event: 8th European Conference on Wood Modification 2015
Year: 2015 - Novel applications of Nanoindentation in wood science – Mechanical properties and interface performance of wood cell walls
Autoren: Konnerth, J; Gindl-Altmutter, W
Event: Nanobrücken 2015
Year: 2015 - Neue Wege im mechanischen Holzaufschluss - alternative Technologien, Energieeinsparung und Ressourceneffizienz
Autoren: Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J. Teischinger, A.
Event: Holz als neuer Werkstoff - Innovationen mit holzbasierten Materialien
Year: 2014 - Innovative Trenn- und Aufteiltechnologien
Autoren: Müller, U., Vay, O., Martinez-Conde, A., Frybort, S., Krenke, T., Konnerth, J., Teischinger, A.,
Event: 16. Holztechnologisches Kolloquium, Dresden
Year: 2014 - Stamm-Astanbindung – eine biologisch optimierte Struktur mit hoher mechanischer Leistungsfähigkeit
Autoren: U. Müller, J. Konnerth, W. Gindl-Altmutter, D. Kaserer, J. Keckes
Event: Grazer Holzbau-Fachtagung - GraHFT 2014
Year: 2014 - Einfluss der lokalen Polarität auf die Verklebung von Holz
Autoren: Müller, U., Gindl-Altmutter, W., Konnerth, J., Obersiebnig, M., Frybort, S., Steiner, G., Stingl, R.
Event: Kooperationsforum - Kleben von Holz und Holzwerkstoffe - Bayern Innovativ
Year: 2014 - Cross industry Innovation process to identify "new" Technologies for mechanical Wood disintegration
Autoren: Vay, O., Konnerth, J., Frybort, S., Krenke, T., Teischinger, A., Müller, U.
Event: 57th SWST International Convention, 7th Wood Structure and Properies Conference, 6th European Hardwood Conference
Year: 2013 - Gezielte Beeinflussung der lokalen Adhäsion von Klebstoffen an der Holzzellwand
Autoren: Konnerth, J; Gilge, M; Weigl, M; Avramidis, G; Wolkenauer, A; Obersriebnig, M;
Event: Josef Umdsch Workshop 2013 - Plasmamodifikation von Holz
Year: 2013 - Nanoindentation for direct evaluation of adhesion at the cell wall-adhesive interface & AFM-based polarity characterization of wood surfaces
Autoren: Konnerth, J; Obersriebnig, M; Frybort, S; Gindl-Altmutter, W;
Event: Int. Conference on Wood Adhesives
Year: 2012 - Sub-micron resolution characterisation of wood cell walls with Scanning Near Field Optical Microscopy
Autoren: Tobias Keplinger, Johannes Konnerth, Markus Rüggeberg, Notburga Gierlinger, Ingo Burgert
Event: COST Action FP1105: Understanding wood cell structure, biopolymer interaction and composition. First Workshop
Year: 2010 - Acoustic emissions and radial shrinkage behavior of fresh versus pre-dried Norway spruce sapwood
Autoren: Rosner S., Konnerth J., Hansmann C.
Event: 11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying
Year: 2010 - Strain distribution in a spruce branch-stem junction
Autoren: Johannes Konnerth, Ulrich Müller, Wolfgang Gindl, Christoph Buksnowitz
Event: COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials
Year: 2010 - Cellulose fibers and nanofibrils for adhesive reinforcement
Autoren: Veigel, S. , Müller, U., Konnerth, J., Gindl, W.
Event: International Conference on Nanotechnology for the Forest Products Industry
Year: 2010 - Possibilities and limits of wood-fibre based composites
Autoren: Teischinger, A., Müller, U., Konnerth, J.
Event: 8th Global WPC and Natural Fibre Composites Congress and Exihibition 2010
Year: 2010 - Digital image analysis of radial shrinkage of fresh Norway spruce wood
Autoren: Hansmann C., Konnerth J., Rosner S.
Event: 11th International IUFRO Wood Drying Conference 2010 - Recent Advances in the Field of Wood Drying
Year: 2010 - Full set of elastic constants of spruce wood cell walls determined by Nanoindentation.
Autoren: Konnerth Johannes Buksnowitz Christoph Gindl-Altmutter Wolfgang Hofstetter Karin Jäger Andreas
Event: Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future.
Year: 2010 - Caratterizzazione micromeccanica di rivestimenti e sistemi di incollaggio
Autoren: Stöckl Frank Konnerth Johannes Gindl Wolfgang Weigl Martin
Event: Rivestimenti Superficiali e Materiali Compositi per il settore Legno
Year: 2010 - Strain distributions around knots in Picea abies (L.) boards subjected to tensile load.
Autoren: Christoph Buksnowitz, Ulrich Müller, Wolfgang Gindl, Johannes Konnerth
Event: COST Strategic Workshop 2010 - Principles and Development of Bio-inspired Materials
Year: 2010 - Macro- and micromechanical properties of red oak wood after selective removal of hemicelluloses.
Autoren: Konnerth Johannes, Eiser Martina, Jäger Andreas, Wimmer Rupert
Event: Society of Wood Science and Technology, 53rd International Convention, Innovative Wood products are the Future.
Year: 2009 - Experimental techniques Lectures on Atomic Force Microscopy (AFM) and Nanoindentation (NI)
Autoren: Olivier Arnould, Andreas Jäger, Johannes Konnerth
Event: Spring School COST action FP0802 2009 - Wood at the microscale: structural and mechanical fundamentals
Year: 2009 - Nanoindentation for characterisation of wood-adhesive bonds
Autoren: Konnerth J Gindl W
Event: International Conference on Wood Adhesives ICWA 2009
Year: 2008 - Information potential of acoustic emissions on the dehydration behavior of wood
Autoren: Rosner S., Karlsson B., Konnerth J., Hansmann C.
Event: 28th European Conference on Acoustic Emission Testing 2008
Year: 2007 - Scanning Thermal Microscopy in wood adhesive bondlines
Autoren: Konnerth J, Rials TG, Harper D, Lee S-H, Gindl W
Event: 9th International Conference on Wood & Biofiber Plastic Composites
Year: 2007 - Nanoindentation for Characterizing Wood and Related Systems
Autoren: Konnerth Johannes, Gindl Wolfgang
Event: Society of Wood Science and Technology, 50th Annual Convention
Year: 2007 - Wood adhesive bondlines by Nanoindentation
Autoren: Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W
Event: 13th International Conference on Experimental Mechanics 2007
Year: 2007 - Wood adhesive bondlines by Nanoindentation
Autoren: Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W
Event: 13th International Conference on Experimental Mechanics 2007
Year: 2006 - Mikromechanische Charakterisierung von Holz-Klebefugen mittels Nanoindentation
Autoren: Konnerth J. Müller U. Gindl W.
Event: 2. Wiener Biomaterialsymposium 2006