Herwig Mayer
Ao.Univ.Prof. Dipl.-Ing. Dr.techn. Herwig Mayer
Institut Institute of Physics and Material Science
Location Peter-Jordan-Straße 82, 1190 Wien
Email herwig.mayer@boku.ac.at
Tel: +43 1 47654-89202
ORCID: 0000-0002-8872-5393
U-4599-2019: ResearcherId
55844848900: AuthorId
Research Focus
Fatigue properties of materials Development and standardization of ultrasonic fatigue testing Damage tolerance and infinite fatigue life Influence of microstructural variability on cyclic strength
Career
- 2005 Research visit at the General Motors Research and Development Center, Materials and Processes Laboratory, Warren, USA
- 2002 Research stay at the Materials Science Department, Ford Research Laboratories, Dearborn, USA
- 2001 Visiting Professor at the University of Michigan, Department of Materials Science and Engineering, Ann Arbor, USA
- 1999 Habilitation, University of Natural Resources and Life Sciences, Vienna
- 1993 Research visit at the University of Pennsylvania, Department of Materials Science and Engineering, Philadelphia, USA
- 1991 Research visit at the University of Shizuoka, Faculty of Engineering, Hamamatsu, Japan
- 1989 Doctoral degree, Technical University Vienna
- 1986 Diploma, Technical University Vienna
Projects
0 Projects found.
Publications
Knowledge Transfer to Society
Media
Lectures
(2023) High and very high cycle fatigue properties of pearlitic rail steel R350HT
Autoren: Schönbauer, BM; Sistaninia, M; Maierhofer, J; Gänser, H-P; Pippan, R; Mayer, H
13th International Fatigue Congress (FATIGUE2022+1)
(2023) Very high cycle fatigue properties of bearing steels at elevated temperatures
Autoren: More, SS; Morales-Espejel, GE; Mayer, H; Schönbauer, BM
13th International Fatigue Congress (FATIGUE2022+1)
(2022) Micro-mechanism associated with very high cycle fatigue crack initiation of advanced DQ&P processed steel
Autoren: Ghosh, S; Schönbauer, BM; Pallaspuro, S; Somani, M; Mayer, H; Kömi, J
European Conference on Fracture 2022 (ECF23)
(2021) Very High Cycle Fatigue properties of ultrahigh-strength steel - a fracture mechanics evaluation
Autoren: Schönbauer, BM Frondelius, T Ghosh, S Kömi, J Mayer, H
8th International Conference on Very High Cycle Fatigue VHCF8 2021
(2021) High speed in situ synchrotron observation of super elastic Nitinol fatigue at ultrasonic frequency
Autoren: Fitzka, M; Rennhofer, H;, Catoor, D; Reiterer, M; Lichtenegger, H; Checchia, S; di Michiel, M; Mayer, H
8th International Conference on Very High Cycle Fatigue VHCF8 2021
(2021) Inclusion initiated fracture under torsion very high cycle fatigue loading at different load ratios
Autoren: Karr, U Sandaiji, Y Schönbauer, BM Mayer, H
8th International Conference on Very High Cycle Fatigue VHCF8 2021
(2021) Variable amplitude VHCF of 17-4PH stainless steel with inclusion-initiated fracture and stepwise S-N curve
Autoren: Mayer, H Schönbauer, B Fitzka, M Karr, U
8th International Conference on Very High Cycle Fatigue VHCF8 2021
(2019) Defect tolerance of high-strength steels in the HCF and VHCF regime
Autoren: Schönbauer, BM; Yanase, K; Frondelius, T; Kuoppala, J; Kömi, J; Endo, M; Mayer, M
Fatigue Design 2019
(2019) Internal inclusion-initiated fracture under very high cycle fatigue axial and torsion loading at different load ratios
Autoren: Karr, U; Schönbauer, B; Fitzka, M; Sandaiji, Y; Tamura, E; Murakami, S; Mayer, H
Fatigue Design 2019
(2019) High speed in situ synchrotron observation of cyclic deformation and phase transformation of superelastic Nitinol at ultrasonic frequency
Autoren: Fitzka, M; Rennhofer, H; Lichtenegger, H; Irrasch, D; Mayer, H; Checchia, S; di Michiel, M; Grünewald, TA
WPI-iMdc 2019 Spring Meeting
(2018) Nitrided 18Ni maraging steel sheet tested at low and ultrasonic frequency
Autoren: Mayer, H.; Karr, U.; Fitzka, M.; Schönbauer, B.; Pennings, B.; Tran, D.
12th International Fatigue Congress
(2018) On the defect tolerance of martensitic stainless steels under cyclic loading
Autoren: Schönbauer, BM; Mayer, H; Yanase, K; Endo, M
International Conference on Material Strength and Applied Mechanics
(2018) Inclusion initiated frature under cyclic torsion and cyclic tension VHCF loading at different load ratios
Autoren: Mayer, H.; Karr, U.; Schönbauer, B.; Fitzka, M.; Sandaiji, Y.; Tamura, E.; Murakami, S.
12th International Fatigue Congress
(2018) In situ observation of phase transformation in superelastic NiTiNOL shape memory alloy during ultrasonic fatigue testing - Are superelastic phase transformations fast enough?
Autoren: Fitzka, M; Catoor, D; Rennhofer, H; Reiterer, M; Mayer, H; Lichtenegger, H;
12th International Fatigue Congress
(2018) Ultrasonic fatigue testing of continuous glass fibre reinforced polymers
Autoren: U. Karr, U.; Schönbauer, B.M.; Flore, D.; Wegener, K.; Oetting, C.C.; Mayer, H.
12th International Fatigue Congress
(2018) Influence of inclusions and small defects on cyclic torsion and cyclic tension very high cycle fatigue of martensitic steels
Autoren: Schönbauer, BM; Karr, U; Fitzka, M; Mayer, H
18th International Conference on the Strength of Materials
(2018) Torsional fatigue properties of 17-4PH stainless steel at different load ratios
Autoren: Schönbauer, B.M.; Chehrehrazi, M.; Yanase, K.; Endo, M., Mayer, H.
12th International Fatigue Congress
(2017) Influence of small defects on the uniaxial and torsional fatigue strength of 17-4PH stainless steel
Autoren: Schönbauer, BM; Mayer, H; Yanase, K; Endo, M
Third International Symposium on Fatigue Design & Material Defects
(2017) Development of nitrided 18Ni maraging steel to optimise the very high cycle fatigue properties
Autoren: Karr, U; Pennings, B; Tran, D; Mayer, H;
7th International Conference on Very High Cycle Fatigue VHCF7 2017
(2017) Ultrasonic Fatigue Testing of Thin NiTiNOL Sheets in the VHCF Regime
Autoren: Fitzka, M; Catoor, D; Reiterer, M; Mayer, H
7th International Conference on Very High Cycle Fatigue VHCF7 2017
(2017) Variable amplitude loading of 17-4PH stainless steel in the VHCF regime
Autoren: Schönbauer, BM; Fitzka, M; Karr, U; Mayer, H
7th International Conference on Very High Cycle Fatigue VHCF7 2017
(2017) Torsional fatigue properties of 17-4PH stainless steel in the VHCF regime
Autoren: Schönbauer, BM; Mayer, H; Yanase, K; Endo, M
7th International Conference on Very High Cycle Fatigue VHCF7 2017
(2017) TORSIONAL AND AXIAL VHCF PROPERTIES OF SPRING STEEL AT DIFFERENT LOAD RATIOS
Autoren: H. Mayer, U. Karr, Y. Sandaiji, E. Tamura
7th International Conference on Very High Cycle Fatigue VHCF7 2017
(2017) Very high cycle fatigue of wrought magnesium alloy AZ61
Autoren: U. Karr, S. Stich, H. Mayer,
21st European Conference on Fracture ECF21 2016
(2017) Ultrasonic fatigue testing of thin MP35N alloy wire
Autoren: M. Fitzka, D. Cantoor, D. Irrasch, M. Reiterer, H. Mayer,
21st European Conference on Fracture ECF21 2016
(2017) Environmental influences on the near threshold fatigue crack growth of wrougth magnesium alloy AZ61 HP
Autoren: Karr, U; Schönbauer, BM; Stich, A.; Mayer, H
7th International Conference on Very High Cycle Fatigue VHCF7 2017
(2015) Variable amplitude testing of 2024-T351 aluminum alloy using ultrasonic and servo-hydraulic fatigue testing equipment
Autoren: Fitzka, M; Mayer, H
3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL2015
(2014) Effects of extreme events on carbon cycling along a terrestrial-aquatic continuum at the catchment scale
Autoren: Schomakers, J; Zehetner, F; Mentler, A; Yeh, T; Hein, T; Mayer, H; Huang J-C; Hseu, Z-Y; Jien, S-H; Liao, C-S; Lee, M-H; Lee, T-Y
Annual Confernce of the Austrian Soil Science Society 2014 - Burining Issues in Soil Science
(2014) Ultrasonic fatigue of spray formed hypereutectic aluminum silicon alloy and vibration analysis by means of non-linear acoustics
Autoren: Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, S E; Przeorski, T; Krug, P
6th International Conference on Very High Cycle Fatigue
(2014) VHCF of spray formed hypereutectic aluminium silicon alloy
Autoren: Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, S; Przeorski, T; Krug, P
Fatigue Design & Material Defects (FDMDII-JIP 2014)
(2013) Fatigue strength of spring steel under cyclic torsion and cyclic axial loading in the VHCF regime
Autoren: H. Mayer, R. Schuller, M. Hahn, M. Bacher-Höchst
Thermec 2013
(2013) Low intensity ultrasonic vibration amplitude as a tool for characterisation of water stable soil aggregates
Autoren: Mentler, A; Schomakers, J; Mayer, H
European Geosciences Union EGU General Assembly 2013
(2013) Ultrasonic Fatigue of Al 2024-T351 and Analysis of Non-Linear Vibration
Autoren: Fitzka, M; Mayer, H; Schuller, R
24th Colloquium on Fatigue Mechanisms
(2012) Endurance limits and non-propagating cracks
Autoren: H. Mayer, S. Tschegg, B. Schönbauer
From Macro to Nano, Understanding Mechanical Behavior across Length Scales: A Structural Materials Division Symposium in Honor of Robert Ritchie, TMS 2012
(2012) Ultrasonic Fatigue Testing at Different Load Ratios under Constant and Variable Amplitude (Invited presentation)
Autoren: H. Mayer, M. Fitzka, R. Schuller
TMS 2012
(2012) Variable Amplitude Loading of 2024-T351 Aluminium Alloy at Low and Ultrasonic Frequency
Autoren: Mayer, H; Fitzka, M; Schuller, R;
Materials Science and Engineering Conference 2012
(2011) Ultrasonic fatigue testing of 2024-T351 aluminium alloy at different load ratios under constant and variable amplitude
Autoren: H.Mayer, M.Fitzka, R.Schuller
5th International Conference Very High Cycle Fatigue VHCF-5 2011
(2011) Influence of microstructure on VHCF lifetime under constant and variable amplitude loading (Invited presentation)
Autoren: H.Mayer
Material Science and Technology 2011
(2011) Ultra slow fatigue crack propagation in TA6V titanium alloy
Autoren: C.Sarrazin-Baudoux, S.E.Stanzl-Tschegg, H.Mayer, J.Petit
5th International Conference Very High Cycle Fatigue VHCF-5 2011
(2011) VHCF behaviour of VDSiCr spring steel under different loading conditions
Autoren: R.Schuller, A.Fayard, H.Mayer, M.Bacher-Höchst
5th International Conference Very High Cycle Fatigue VHCF-5 2011
(2010) VHCF-Prüftechnik
Autoren: Mayer, H
Tagung Werkstoffprüfung 2010
(2008) Investigations of very high cycle fatigue properties under constant and variable amplitude loading using ultrasonic fatigue testing equipment
Autoren: H. Mayer
Materials Science and Engineering, Congress and Exhibition on Advanced Materials and Processes 2008
(2007) Fatigue damage of low amplitude cycles under variable amplitude loading conditions
Autoren: H. Mayer
4th International Conference, Very High Cycle Fatigue VHCF-4 2007
(2007) Fatigue damage of low amplitude cycles under variable amplitude loading conditions
Autoren: H. Mayer
4th International Conference, Very High Cycle Fatigue VHCF-4 2007
(2006) Very high cycle fatigue behaviour under cyclic torsion lading
Autoren: H. Mayer
European Conference of Fracture ECF16 2006
(2005) Environmental-assisted fatigue cracking of aluminium alloys at different frequencies
Autoren: Stanzl-Tschegg, S.E., Holper, B., Mayer, H.
ICF 11 2005
(2005) Fatigue Damage of Cyclic Loads below Endurance Limit and Threshold Stress Intensity
Autoren: Mayer, H.
EUROMAT 2005
(2004) Fatigue lifetime investigations in the very high cycle regime using the ultrasonic resonance testing method
Autoren: Mayer, H.
3rd International Conference on Very High Cycle Fatigue 2004
(2004) Ultraschall-Ermüdungsprüfung von Werkstoffen im Bereich sehr hoher Lastspielzahlen
Autoren: Mayer, H.
Kolloquium "Werkstoffe, Fertigung, Konstruktion" an der Universität Siegen
(2004) Fatigue crack initiation and growth in low-weight alloys in the VHC regime
Autoren: Mayer, H., Stanzl-Tschegg, S.
15th Colloquium on Fundamental Fatigue Mechanisms 2004
(2004) Ermüdung bei hohen Lastspielzahlen
Autoren: Mayer, H.
Robert Bosch GmbH
(2004) Very high cycle fatigue of normalized steels
Autoren: Zettl, B., Mayer, H., Stanzl-Tschegg, S.E.
3rd International Conference on Very High Cycle Fatigue 2004
(2004) H. Survey of fatigue lifetime investigations in the very high cycle regime using the ultrasonic resonance testing method
Autoren: Mayer, H.
Seminar at the Shizuoka University
(2004) Bestimmung der Phosphor-Verteilung in stabilen Bodenaggregaten aus einem Erosionsversuch in Mistelbach
Autoren: Mentler, A., Mayer, H., Hobel, A., Cuncl, E., Hromatka, A., Pöll, R.
ALVA-Jahrestagung 2004 - Klimawandel - Auswirkungen auf Umwelt und Agrarproduktion
(2004) Elevated temperature fatigue behavior of a 319 cast aluminium alloy in the gigacycle regime
Autoren: Zhu, X., Shyam, A., Jones, J.W., Mayer, H., Lasecki, J.V., Allison, J.E.
3rd International Conference on Very High Cycle Fatigue 2004
(2003) Influence of ultrasonic vibrations on low speed cutting of spruce wood
Autoren: Sinn, G., Beer, P., Zettl, B., Mayer, H.
16th international wood machining seminar 2003
(2003) High cycle fatigue of magnesium alloys.Proc. of 6th Int. Conf. on magnesium alloys and their applications.
Autoren: Mayer, H., Stich, A., Zettl, B., Haldenwanger, H.G.
6th Int. Conf. on magnesium alloys and their applications
(2003) Besonderheiten der schwingenden Beanspruchung bei extrem hoher Lastspielzahl
Autoren: Mayer, H., Stanzl-Tschegg, S.
Werkstoffprüfung 2003: Herausforderungen durch den industriellen Fortschritt
Fatigue properties of high pressure die cast magnesium alloys.
Autoren: Mayer, H., Rösch, R., Lipowsky, H., Zettl, B., Papakyriacou, M., Stanzl-Tschegg, S.E.
Application of Ultrasonic Frequencies in Fatigue.
Autoren: Mayer, H.
Fatigue and Fatigue Crack Growth of Aluminium Alloys of Very High Numbers of Cycles.
Autoren: Tschegg, S.E., Mayer, H.R., Zettl, B.
Fatigue crack growth testing procedures using ultrasonic equipment.
Autoren: Mayer, H.
Werkstoffermüdung bei sehr hohen Beanspruchungsfrequenzen
Autoren: Mayer, H.
Influence of loading frequency on the high cycle fatigue properties of AlZnMgCu1.5 aluminium alloy.
Autoren: Mayer, H.
High cycle fatigue testing of materials at ultrasonic frequency.
Autoren: Mayer, H.
High cycle fatigue testing of materials at ultrasonic frequency.
Autoren: Mayer, H.
High Cycle Fatigue Crack Growth Properties of Aramid Reinforced Aluminium Laminates:
Autoren: Stanzl-Tschegg, S.E., Papakyriacou, M., Mayer, H., Schijve, J.
Ermüdungsverhalten von Magnesium-Gusslegierungen.
Autoren: Mayer, H.
Holzbearbeitung mit Überlagerung einer Ultraschall-Wechselbeanspruchung
Autoren: Mayer, H.
Fatigue and Fatigue Crack Growth of Aluminium Alloys.
Autoren: Stanzl-Tschegg, S.E., Mayer, H.R.
High cycle fatigue testing of materials at ultrasonic frequency.
Autoren: Mayer, H.
Bodenstruktur und Humusstabilität – Analytische Potenziale von Ultraschall-Fraktionierung und simultaner Thermoanalyse
Autoren: Wieser, S; Keiblinger, K; Hood-Nowotny, R; Mayer, H; Mentler, A; Rosinger, C; Wriessnig, K; Bodner, G
Application of Ultrasound for the Development of Lightweight Alloys.
Autoren: Mayer, H.
Application of Ultrasonic-Assisted Cutting in Wood Machining
Autoren: Sinn, G., Mayer, H., Zettl, B., Ede, Ch., Beer, P., Stanzl-Tschegg, S.
Crack Face Interactions and Near-Threshold Fatigue Crack Growth Under Mixed Mode Loading Conditions.
Autoren: Mayer, H.
The Fatigue Properties of Aluminium and Magnesium Alloys at Very High Numbers of Cycles.
Autoren: Mayer, H.