University of Natural Resources and Life Sciences, Vienna (BOKU) - Research portal
Publications
Search Items: fatigue, . hits: 87
** = Publications listed in SCI/SSCI - Journals (published in Web of Science)
* = peer-reviewed publication (not listed in SCI/SSCI)
Only: Full paper/article, Review, Proceedings Paper
2023
** Fitzka, M; Moalla, M; Mayer, H Very high cycle fatigue of high carbon chromium bearing steel at high compressive mean stresses.
INT J FATIGUE. 2023; 169, 107492 WoS FullText FullText_BOKU** Mrzljak, S; Zanghellini, B; Gerdes, L; Helwing, R; Schuller, R; Sinn, G; Lichtenegger, H; Walther, F; Rennhofer, H Effect of carbon nanofibre orientation on fatigue properties of carbon fibre-reinforced polymers.
J COMPOS MATER. 2023; 57(6): 1149-1164. WoS FullText FullText_BOKU** Schonbauer, BM; More, SS; Morales-Espejel, GE; Mayer, H Influence of elevated temperature on the very high cycle fatigue properties of bearing steels.
INT J FATIGUE. 2023; 176, 107847 WoS FullText FullText_BOKU2022
** Karr, U; Fitzka, M; Schonbauer, BM; Krenke, T; Muller, U; Mayer, H Fatigue testing of wood up to one billion load cycles.
HOLZFORSCHUNG. 2022; 76(11-12): 977-984. WoS FullText FullText_BOKU** Karr, U; Schonbauer, BM; Sandaiji, Y; Mayer, H Effects of Non-Metallic Inclusions and Mean Stress on Axial and Torsion Very High Cycle Fatigue of SWOSC-V Spring Steel.
METALS-BASEL. 2022; 12(7), 1113
WoS
FullText
FullText_BOKU
** Schonbauer, BM; Ghosh, S; Karr, U; Pallaspuro, S; Komi, J; Frondelius, T; Mayer, H Mean-stress sensitivity of an ultrahigh-strength steel under uniaxial and torsional high and very high cycle fatigue loading.
FATIGUE FRACT ENG M. 2022; 45(11): 3361-3377. WoS PubMed
FullText
FullText_BOKU
** Schonbauer, BM; Killinger, M; Karr, U; Fitzka, M; Muller, U; Teischinger, A; Mayer, H Fatigue properties of wood at different load ratios tested at 50 Hz and 20 kHz.
MATERIALWISS WERKST. 2022; 53(3): 344-354. WoS FullText FullText_BOKU2021
** Fitzka, M; Karr, U; Granzner, M; Melichar, T; Rohammer, M; Strauss, A; Mayer, H Ultrasonic fatigue testing of concrete.
ULTRASONICS. 2021; 116, 106521
WoS
PubMed
FullText
FullText_BOKU
** Fitzka, M; Schonbauer, BM; Rhein, RK; Sanaei, N; Zekriardehani, S; Tekalur, SA; Carroll, JW; Mayer, H Usability of Ultrasonic Frequency Testing for Rapid Generation of High and Very High Cycle Fatigue Data.
MATERIALS. 2021; 14(9), 2245
WoS
PubMed
FullText
FullText_BOKU
** Karr, U; Schonbauer, BM; Sandaiji, Y; Mayer, H Influence of load ratio on torsion very high cycle fatigue of high-strength spring steel in the presence of detrimental defects.
FATIGUE FRACT ENG M. 2021; 44(9): 2356-2371. WoS FullText FullText_BOKU** Schonbauer, BM; Fitzka, M; Karr, U; Mayer, H Variable amplitude very high cycle fatigue of 17-4PH steel with a stepwise S-N curve.
INT J FATIGUE. 2021; 142, 105963
WoS
FullText
FullText_BOKU
** Schonbauer, BM; Ghosh, S; Komi, J; Frondelius, T; Mayer, H Influence of small defects and nonmetallic inclusions on the high and very high cycle fatigue strength of an ultrahigh-strength steel.
FATIGUE FRACT ENG M. 2021; 44(11): 2990-3007. WoS FullText FullText_BOKU** Wanhill, RJH; Stanzl-Tschegg, SE Short/small fatigue crack growth, thresholds and environmental effects: a tale of two engineering paradigms.
CORROS REV. 2021; 39(2): 165-175.
WoS
FullText
FullText_BOKU
2020
** Karr, U; Sandaiji, Y; Tanegashima, R; Murakami, S; Schonbauer, B; Fitzka, M; Mayer, H Inclusion initiated fracture in spring steel under axial and torsion very high cycle fatigue loading at different load ratios.
INT J FATIGUE. 2020; 134, 105525 WoS FullText FullText_BOKU2019
** Fitzka, M; Pennings, B; Karr, U; Schonbauer, B; Schuller, R; Tran, MD; Mayer, H Influence of cycling frequency and testing volume on the VHCF properties of 18Ni maraging steel.
ENG FRACT MECH. 2019; 216, UNSP 106525 WoS FullText FullText_BOKU** Karr, U; Schonbauer, B; Fitzka, M; Tamura, E; Sandaiji, Y; Murakami, S; Mayer, H Inclusion initiated fracture under cyclic torsion very high cycle fatigue at different load ratios.
INT J FATIGUE. 2019; 122: 199-207. WoS FullText FullText_BOKU** Schonbauer, BM; Mayer, H Effect of small defects on the fatigue strength of martensitic stainless steels.
INT J FATIGUE. 2019; 127: 362-375. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE When do small fatigue cracks propagate and when are they arrested?.
CORROS REV. 2019; 37(5): 397-418. WoS FullText FullText_BOKU2018
** Karr, U; Schonbauer, BM; Mayer, H Near-threshold fatigue crack growth properties of wrought magnesium alloy AZ61 in ambient air, dry air, and vacuum.
FATIGUE FRACT ENG M. 2018; 41(9): 1938-1947.
WoS
FullText
FullText_BOKU
2017
** Fitzka, M; Catoor, D; Irrasch, D; Reiterer, M; Mayer, H Fatigue testing of thin CoNiCr wire up to 10(10) cycles.
INT J FATIGUE. 2017; 98: 92-100. WoS FullText FullText_BOKU** Flore, D; Wegener, K; Mayer, H; Karr, U; Oetting, CC Investigation of the high and very high cycle fatigue behaviour of continuous fibre reinforced plastics by conventional and ultrasonic fatigue testing.
COMPOS SCI TECHNOL. 2017; 141: 130-136. WoS FullText FullText_BOKU** Karr, U; Schuller, R; Fitzka, M; Denk, A; Strauss, A; Mayer, H Very high cycle fatigue testing of concrete using ultrasonic cycling.
MATER TEST. 2017; 59(5): 438-444. WoS FullText FullText_BOKU** Schonbauer, BM; Yanase, K; Endo, M Influences of small defects on torsional fatigue limit of 17-4PH stainless steel.
INT J FATIGUE. 2017; 100: 540-548. WoS FullText FullText_BOKU** Schonbauer, BM; Yanase, K; Endo, M The influence of various types of small defects on the fatigue limit of precipitation-hardened 17-4PH stainless steel.
THEOR APPL FRACT MEC. 2017; 87: 35-49. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE Fracture mechanical characterization of the initiation and growth of interior fatigue cracks.
FATIGUE FRACT ENG M. 2017; 40(11): 1741-1751. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE Influence of material properties and testing frequency on VHCF and HCF lives of polycrystalline copper.
INT J FATIGUE. 2017; 105: 86-96. WoS FullText FullText_BOKU2016
** Fitzka, M; Mayer, H Constant and variable amplitude fatigue testing of aluminum alloy 2024-T351 with ultrasonic and servo-hydraulic equipment.
INT J FATIGUE. 2016; 91: 363-372. WoS FullText FullText_BOKU** Mayer, H Recent developments in ultrasonic fatigue.
FATIGUE FRACT ENG M. 2016; 39(1): 3-29. WoS FullText FullText_BOKU** Mayer, H; Schuller, R; Karr, U; Fitzka, M; Irrasch, D; Hahn, M; Bacher-Hochst, M Mean stress sensitivity and crack initiation mechanisms of spring steel for torsional and axial VHCF loading.
INT J FATIGUE. 2016; 93: 309-317. WoS FullText FullText_BOKU** Schonbauer, BM; Yanase, K; Endo, M VHCF properties and fatigue limit prediction of precipitation hardened 17-4PH stainless steel.
INT J FATIGUE. 2016; 88: 205-216. WoS FullText FullText_BOKU** Stanzl-Tschegg, SE; Meischel, M; Arcari, A; Iyyer, N; Apetre, N; Phan, N Combined cycle fatigue of 7075 aluminum alloy - Fracture surface characterization and short crack propagation.
INT J FATIGUE. 2016; 91: 352-362. WoS FullText FullText_BOKU** Strauss, A Numerical and monitoring based Markov Chain approaches for the fatigue life prediction of concrete structures.
ENG STRUCT. 2016; 112: 265-273. WoS FullText FullText_BOKU2015
** Mayer, H; Schuller, R; Karr, U; Irrasch, D; Fitzka, M; Hahn, M; Bacher-Hochst, M Cyclic torsion very high cycle fatigue of VDSiCr spring steel at different load ratios.
INT J FATIGUE. 2015; 70: 322-327. WoS FullText FullText_BOKU** Schonbauer, BM; Perlega, A; Karr, UP; Gandy, D; Stanzl-Tschegg, SE Pit-to-crack transition under cyclic loading in 12% Cr steam turbine blade steel.
INT J FATIGUE. 2015; 76: 19-32. WoS FullText FullText_BOKU** Schonbauer, BM; Stanzl-Tschegg, SE; Perlega, A; Salzman, RN; Rieger, NF; Turnbull, A; Zhou, SQ; Lukaszewicz, M; Gandy, D The influence of corrosion pits on the fatigue life of 17-4PH steam turbine blade steel.
ENG FRACT MECH. 2015; 147: 158-175. WoS FullText FullText_BOKU** Schuller, R; Fitzka, M; Irrasch, D; Tran, D; Pennings, B; Mayer, H VHCF properties of nitrided 18Ni maraging steel thin sheets with different Co and Ti content.
FATIGUE FRACT ENG M. 2015; 38(5): 518-527. WoS FullText FullText_BOKU2014
** Fitzka, M; Mayer, H; Schuller, R; Stanzl-Tschegg, SE; Przeorski, T; Krug, P Variable amplitude loading of spray-formed hypereutectic aluminium silicon alloy DISPAL (R) S232 in the VHCF regime.
FATIGUE FRACT ENG M. 2014; 37(9): 945-957. WoS FullText FullText_BOKU** Mayer, H; Fitzka, M; Schuller, R Variable amplitude loading of Al 2024-T351 at different load ratios using ultrasonic equipment.
INT J FATIGUE. 2014; 60: 34-42. WoS FullText FullText_BOKU** Mayer, H; Schuller, R; Fitzka, M; Iran, D; Pennings, B Very high cycle fatigue of nitrided 18Ni maraging steel sheet.
INT J FATIGUE. 2014; 64: 140-146. WoS FullText FullText_BOKU** Ogawa, T; Stanzl-Tschegg, SE; Schoenbauer, BM A fracture mechanics approach to interior fatigue crack growth in the very high cycle regime.
ENG FRACT MECH. 2014; 115: 241-254. WoS FullText FullText_BOKU** Schonbauer, BM; Stanzl-Tschegg, SE; Perlega, A; Salzman, RN; Rieger, NF; Zhou, SQ; Turnbull, A; Gandy, D Fatigue life estimation of pitted 12% Cr steam turbine blade steel in different environments and at different stress ratios.
INT J FATIGUE. 2014; 65: 33-43. WoS FullText FullText_BOKU** Stanzl-Tschegg, S Very high cycle fatigue measuring techniques.
INT J FATIGUE. 2014; 60: 2-17. WoS FullText FullText_BOKU** Urban, S; Strauss, A; Schutz, R; Bergmeister, K; Dehlinger, C Dynamically loaded concrete structures - monitoring-based assessment of the real degree of fatigue deterioration.
STRUCT CONCRETE. 2014; 15(4): 530-542. WoS FullText FullText_BOKU2013
** Mayer, H; Fitzka, M; Schuller, R Constant and variable amplitude ultrasonic fatigue of 2024-T351 aluminium alloy at different load ratios.
ULTRASONICS. 2013; 53(8): 1425-1432. WoS FullText FullText_BOKU** Mayer, H; Schuller, R; Fitzka, M Fatigue of 2024-1351 aluminium alloy at different load ratios up to 10(10) cycles.
INT J FATIGUE. 2013; 57: 113-119. WoS FullText FullText_BOKU** Schönbauer, BM; Stanzl-Tschegg, SE; Influence of environment on the fatigue crack growth behaviour of 12% Cr steel..
Ultrasonics. 2013; 53(8):1399-1405 WoS PubMed FullText FullText_BOKU** Schuller, R; Mayer, H; Fayard, A; Hahn, M; Bacher-Hochst, M Very high cycle fatigue of VDSiCr spring steel under torsional and axial loading.
MATERIALWISS WERKST. 2013; 44(4): 282-289. WoS FullText FullText_BOKU** Urban, S; Strauss, A; Wagner, R; Reiterer, M Concrete structures under dynamic loading: monitoring based lifetime assessment.
BETON- STAHLBETONBAU. 2013; 67-74. WoS2010
** Rosner, S; Konnerth, J; Plank, B; Salaberger, D; Hansmann, C Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood.
TREES-STRUCT FUNCT. 2010; 24(5): 931-940.
WoS
PubMed
FullText
FullText_BOKU
** Stanzl-Tschegg, SE; Schonbauer, B Mechanisms of strain localization, crack initiation and fracture of polycrystalline copper in the VHCF regime.
INT J FATIGUE. INTERNATIONAL JOURNAL OF FATIGUE; 32: 886-893. WoS FullText FullText_BOKU** Weidner, A; Amberger, D; Pyczak, F; Schonbauer, B; Stanzl-Tschegg, S; Mughrabi, H Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold.
INT J FATIGUE. INTERNATIONAL JOURNAL OF FATIGUE; 32: 872-878. WoS FullText FullText_BOKU2009
** Mayer, H., Haydn, W., Schuller, R., Issler, S., Bacher-Höchst, M., Very high cycle fatigue properties of bainitic high carbon-chromium steel under variable amplitude condition.
INT J FATIGUE, 31, 1300-1308; ISSN 0142-1123 WoS FullText FullText_BOKU** Mayer, H; Haydn, W; Schuller, R; Issler, S; Furtner, B; Bacher-Hochst, M Very high cycle fatigue properties of bainitic high carbon-chromium steel.
INT J FATIGUE. 2009; 31(2): 242-249. WoS FullText FullText_BOKU2008
** Akiniwa, Y; Stanzl-Tschegg, S; Mayer, H; Wakita, M; Tanaka, K Fatigue strength of spring steel under axial and torsional loading in the very high cycle regime.
INT J FATIGUE. 2008; 30(12): 2057-2063. WoS FullText FullText_BOKU** Tschegg, EK; Herndler, S; Weninger, P; Jarnek, M; Stanzi-Tschegg, S; Redl, H Stiffness analysis of tibia-implant system under cyclic loading.
MAT SCI ENG C-BIOMIM SUPRAM S. 2008; 28(8): 1203-1208. WoS FullText FullText_BOKU2007
** Mayer, H., Stojanovic, S., Ede, C., Zettl, B., Beitrag niedriger Lastamplituden zur Ermüdungsschädigung von 0,15%C Stahl.
MATERIALWISS WERKST, 38, 581-590; ISSN 0933-5137 WoS FullText FullText_BOKU** Stanzl-Tschegg, S; Mughrabi, H; Schoenbauer, B Life time and cyclic slip of copper in the VHCF regime.
INT J FATIGUE. INTERNATIONAL JOURNAL OF FATIGUE; 29: 2050-2059. WoS FullText FullText_BOKU2006
** Mayer, H. Ultrasonic Torsion and Tension-Compression Fatigue Testing: Measuring Principles and Investigations on 2024 T351 Aluminium Alloy.
Int. J. Fatigue, 28, 11, 1446-1455 WoS FullText FullText_BOKU** Papakyriacou, M., Mayer, H. Ermüdungsverhalten und Dauerfestigkeit von Graphit und Aluminium - infiltriertem Graphit.
Materialwiss. Werkstofftech., 37, 3, 264-271 WoS FullText FullText_BOKU** Stanzl-Tschegg, S. Fatigue crack growth and thresholds at ultrasonic frequencies.
INT J FATIGUE, 28, 1456-1464; ISSN 0142-1123 WoS FullText FullText_BOKU** Zettl, B., Mayer, H., Ede, C., Stanzl-Tschegg, S. Very high cycle fatigue of normalized carbon steels.
Int. J. Fatigue, 28, 11, 1583-1589 WoS FullText FullText_BOKU** Zhu, X., Shyam, A., Jones, J.W., Mayer, H., Lasecki, J.V., Allison, J.E. Effect of microstructure and temperature on fatigue behavior of E319-T7 cast aluminum alloy in very long life cycles.
Int. J. Fatigue, 28, 11, 1566-1571 WoS FullText FullText_BOKU2005
** Mayer, H., Ede, C., Allison, J.E. Influence of Cyclic Loads below Endurance Limit and Threshold Stress Intensity on Fatigue Damage in Cast Aluminium Alloy 319-T7.
Int. J. Fatigue, 27, 2, 129-141 WoS FullText FullText_BOKU** Mayer, H., Papakyriacou, M., Zettl, B., Vacic, S., Endurance limit and threshold stress intensity of die cast magnesium and aluminium alloys at elevated temperatures.
Int. J. Fatigue, 27, 9, 1076-1088 WoS FullText FullText_BOKU2004
** Holper, B., Mayer, H., Vasudevan, A.K., Stanzl-Tschegg, S.E. Near Threshold Fatigue Crack Growth at Positive Load Ratio in Aluminium Alloys at Low and Ultrasonic Frequency: Influences of Strain Rate, Slip Behaviour and Air Humidity.
Int. J. Fatigue, 26, 27-38 WoS FullText FullText_BOKU2003
** Holper, B; Mayer, H; Vasudevan, AK; Stanzl-Tschegg, SE Near threshold fatigue crack growth in aluminium alloys at low and ultrasonic frequency: Influences of specimen thickness, strain rate, slip behaviour and air humidity.
INT J FATIGUE. 2003; 25(5): 397-411. WoS FullText FullText_BOKU2002
** Carstensen, J.V., Mayer, H., Brøndsted, P. Very high cycle regime fatigue of thin walled tubes made from austenitic stainless steel..
Fatigue Fract. Engng. Mater. Struct., 25, 8/9, 837-844 WoS** Holper, B; Tschegg, EK; Stanzl-Tschegg, S; Gäbler, C [Possibilities for improving fatigue properties of interlocking screws of solid tibial nails. A mathematical model with practical conclusions].
Unfallchirurg. 2002; 105(2):140-146 WoS PubMed** Papakryiacou, M; Mayer, H; Plenk, H; Stanzl-Tschegg, S Cyclic plastic deformation of tantalum and niobium at very high numbers of cycles.
MATER SCI ENG A-STRUCT MATER. 2002; 325(1-2): 520-524. WoS** Papakyriacou, M., Mayer, H., Fuchs, U., Tschegg, S., Wei, R.P. Influence of atmospheric moisture on slow fatigue crack growth at ultrasonic frequency in aluminium and magnesium alloys..
Fatigue Fract. Engng. Mater. Struct., 25, 8/9, 795-804 WoS** Stanzl-Tschegg, S., Mayer, H., Stich, A. Variable amplitude loading in the very high cycle regime..
Fatigue Fract. Engng. Mater. Struct., 25, 8/9, 887-896 WoS** Stanzl-Tschegg, SE Dislocation and surface structures of copper and very-low-carbon steel at low fatigue amplitudes.
Z METALLK. 2002; 93(8): 799-805. WoS2001
** Fonte, M.A., Stanzl-Tschegg, S.E., Holper, B., Tschegg, E.K., Vasudevan, A.K. The microstructure and environment influence on fatigue crack growth in 7049 aluminium alloy at different load ratios.
International Journal of Fatigue, 23, 311-317 WoS** Mayer, H., Papakyriacou, M., Pippan, R., Stanzl-Tschegg, S. Influence of Loading Frequency on the High Cycle Fatigue Properties of AlZnMgCu1.5 Aluminium Alloy..
Mat. Sci. Eng., A, 314, 51-57 WoS** Papakyriacou, M., Mayer, H., Pypen, C., Plenk Jr, H., Stanzl-Tschegg, S. Influence of loading frequency on high - cycle fatigue properties of b.c.c. and h.c.p. metals..
Mat. Sci. Eng., A, 308, 143-152 WoS** Tschegg, S., Mayer, H. Fatigue and fatigue crack growth of aluminium alloys at very high numbers of cycles..
Int. J. Fatigue, 23, 231-237 WoS** Zettl, B., Mayer, H., Stanzl-Tschegg, S. Fatigue Properties of Al-1Mg-0.6Si Foam at Low and Ultrasonic Frequencies..
Int. J. Fatigue, 23, 565-573 WoS2000
** Papakyriacou, M., Mayer, H., Pypen, C., Plenk Jr., H., Stanzl-Tschegg, S. Effect of Surface Treatments on High Cycle Corrosion Fatigue of Metallic Implant Materials..
Int. J. Fatigue, 22/10, 837-886 WoS1999
** Gaebler, C; Stanzl-Tschegg, S; Heinze, G; Holper, B; Milne, T; Berger, G; Vécsei, V Fatigue strength of locking screws and prototypes used in small-diameter tibial nails: a biomechanical study..
J Trauma. 1999; 47(2):379-384 WoS PubMed FullText FullText_BOKU** Mayer, H. R., Lipowsky, H., Papakyriacou, M., Rösch, R., Stich, A., Stanzl-Tschegg, S. E. Application of ultrasound for fatigue testing of lightweight alloys..
Fatigue Fract. Eng. Mater. Struct., 22, 591-599 WoS** Stanzl-Tchegg, SE Fracture mechanisms and fracture mechanics at ultrasonic frequencies.
FATIGUE FRACT ENG MATER STRUC. 1999; 22(7): 567-579. WoS** Stanzl-Tschegg, S.E., Tschegg, E.K., Plasser, O., Vasudevan, A.K. Influence of Microstructure and Load Ratio on Fatigue Threshold Behaviour in 7075 Aluminium Alloy..
Int. J. Fatigue, 21, 255 - 262 WoS1997
** Papakyriacou, M., Schijve, J., Stanzl-Tschegg, S. E. Fatigue crack growth of fiber-metal laminate glare and metal laminate 7475 with different blunt notches..
Fatigue Fract. Eng. Mater. Struct., 20, 11, 1573-1584 WoS1996
** Papakyriacou, M., Mayer, H. R., Tschegg-Stanzl, S. E., Gröschl, M. Fatigue properties of Al2O3 particle reinforced 6061 aluminium alloy in the high-cycle regime..
Int. J. Fatigue, 18, 7, 475-481 WoS1993
** Stanzl-Tschegg, S. E., Mayer, H. R., Tschegg, E. K., Beste, A. In-service loading of AlSi11 aluminium cast alloy in the very high cycle regime..
Int. J. Fatigue, 15, 4, 311-316 WoS** STANZLTSCHEGG, SE; MAYER, HR; TSCHEGG, EK HIGH-FREQUENCY METHOD FOR TORSION FATIGUE TESTING.
ULTRASONICS. 1993; 31(4): 275-280. WoS1992
** PETERLIK, H; DOMNANOVICH, A; KROMP, W; KROMP, K TRANSVERSE EXPANSION OF 2-D CARBON CARBON LAMINATES AS A CONSEQUENCE OF DELAMINATION.
COMPOSITES SCI TECHNOL. 1992; 45(1): 65-72. WoS